Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hi Felix, I have two options that might work for your trailer; the first one being the Stabilizer Jacks #TJ01RT-HD. These mount under the trailer and are a bolt on installation. The second is the Square Drop Leg Stabilizer Jack #SJ-R208, which would…
view full answer...Congrats on the new truck! The Curt RockerBall Multi-Fit Ball Kit item #C78ZV will work great with the puck system in your new 2025 Sierra 2500. It's been specifically designed to work with all the OEM puck systems so the difference in…
view full answer...Hey Marvin, You would be able to use the TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster #TM56FR since your valve stems are rated for 65 psi. The issue is with ones rated lower than 65 psi because the sensors are heavy enough to move as…
view full answer...Hey Steve, so it really depends on the wattage that you will need based on what you'll be powering in the cargo trailer. I attached two links to this page that will help you figure that out. One that has a solar power calculator and another that…
view full answer...Hello David. All of the 2-1/4" or 2-1/2" long 9/16" wheel studs we offer have a knurl diameter of .68, such at the Kodiak Wheel Bolt #K916WB25. We do not have anything with a knurl size of .60 or .62. We do have some 1/2" studs…
view full answer...There are two ways to install a fifth wheel hitch on a pick up truck. One would be to use standard bed-mounted rails. Brackets are mounted to the truck frame with the bed rails sitting directly above. Holes are drilled down through the truck bed to…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
view full answer...Hey Rob, the Torklift camper tie downs part #TL87DR that you referenced are the correct tie downs for your 2024 Ford F-250 long bed with a factory hitch and will work with any of the steps we sell. The only ones it doesn't work with is the…
view full answer...Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…
view full answer...Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…
view full answer...None of the options for the prep package are specifically designed to add height. Depending on the ball you have now you might be able to get a little more height out of the B&W Ball and Safety Chain Kit #BWGNXA2061. The installed height of this…
view full answer...Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…
view full answer...Related Searches
Filter Your Search
Contact and Help