

Galley and Cabin Accessories

Boat Accessories
Videos
for Boat Accessories
Help Articles
for Boat Accessories
Expert Answers
for Boat Accessories
I can end this debate for you real fast! Trailer tires, which will have an ST in front of the size, should always be inflated to the maximum psi indicated on the tire. Trailer tires usually do not have a recommended and maximum psi indication so I am…
view full answer...You can lock your spare tire to the CE Smith Spare Tire Carrier #CE22007Z-11050-2. All you need to do is add the CE Smith Padlock Brackets for Spare Tire Carriers #CE26002Z-2 which will allow you to use a padlock, the Master Lock #ML1KA to lock your…
view full answer...The CE Smith Spare Tire Carrier for Trailers #CE22007Z-11050-2 uses 7/16" lug nuts. This carrier will work with 4-lug and 5-lug wheels that are up to 15 inches; it is made from steel and is zinc-plated which means it is going to be strong…
view full answer...That's going to depend on the weight of your PWC and trailer, but I'd go with a load range C #TT48012C since the two are rated pretty close to be honest. A 4.80-12 tire in load range B like the #AM10060 is rated for 785lbs per tire, where the…
view full answer...I can definitely shed some light on some of the confusion. WeatherTech engineers different mat models that are designed for different types of floors - whether carpeted or vinyl. This is because the type of retention for each floor type is different.…
view full answer...I recommend the Tourney Pro Transom Saver #315-FXJ for your 5'x8' plastic boat. The transom saver is definitely recommended with the lightweight plastic boat you have. With this transom saver you can mount it to the trailer by sliding it onto…
view full answer...The Peterson Red Round Replacement Lens, #420-15, is not interchangeable with the DZ 77-845 light that you referenced but I may have a solution. For just a bit more than the cost of a lens, you could replace the entire light assembly with the Sealed,…
view full answer...We do have the Replacement Pull Pin Kit #F500136 which is the part number 18 in the photo you found. We do not carry the part number 4 for the Fulton F2 Trailer Jack #F1413040134 at this time so you may need to replace the parts from another damaged…
view full answer...The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…
view full answer...You can use the Timken Grease and Oil Seal #TMK98ZR in place of the Grease Seal #GS-2250DL. While they are not exactly the same seal construction it is still a double lip design and the dimensions are the same so they are going to fit correctly.
view full answer...The Hook and Keeper for Enclosed Trailer Door part #PLR9-A are not spring loaded. That said, we do have spring loaded options like the 45-Degree T-Style Hook and Keeper Door Holder for Enclosed Trailer part #37211765. We don't have any straight…
view full answer...Yes you can use a Bearing Buddy on your current axle setup but you'll have to remove the zerk/grease fitting. What you have now is an EZ lube spindle which allows you to push grease through the middle of the spindle but you can install a Bearing…
view full answer...