Custom Fit 2018 Mitsubishi Outlander Accessories

Although we have not had the chance to install a 7-way on a 2018 Mitsubishi Outlander PHEV, what we do know is that you can install a 4-way on your vehicle using the Curt #C59496. This is a good place to start. When adding a 7-way like the #ETBC7 the…

We can get your 2018 Mitsubishi Outlander set up for towing with a hitch and wiring harness, and let's go ahead and start with the hitch, and what you will need is the following: - etrailer Trailer Hitch Receiver #e48KR With the hitch set, the…

The only part of the Curt Trailer Hitch Receiver part #C13398 that will be visible once installed on your 2018 Mitsubishi Outlander PHEV will be the receiver tube opening. Therefore, the majority of the hitch will actually be hidden. I do have an…

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

Westin currently only lists the Westin Perfect Match Series Rear Step Bumper #31006 as fit for your 2002 Chevy Silverado.

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13163 excludes the PHEV. However, there is a 2018 Mitsubishi Outlander PHEV fit and it is #C13398. This will work well for bike racks and other accessories. If you will be towing, I…

The ModuLite box on T-One Harness part #118482, requires one wire to be ran up to the battery for power. There are no easy-to-access or substantial power sources at the back of most vehicles, so one power wire will have to be run up to the battery.…

There are both Class I and Class III trailer hitches available that are confirmed to fit your 2010 Honda CR-V. The available Class I hitches, such as the Draw-Tite Sport Frame #24792, feature a square tube design, while the Class III hitches like the…

Propane tanks can't be store inside of an enclosed container like a toolbox. If they build enough pressure it has to vent out to open air. That is why the plastic propane tank covers you see on trailers are open at the bottom. I recommend a…

I'd go with the Yakima LoadWarrior part #Y07070 as the front and rear bar of the basket can be used as a roof rack to attach a rack designed for round bars like bike racks etc. Aside from that the two are very similar dimensionaly and weigh about…

Hey Dj, we have hitches that fit the non-PHEV versions of the 2018 Mitsubishi Outlander like the Draw Tite part #75888 but the EcoHitch part #306-X7379 only fits the PHEV models.

To install the Fulton Fold-Away Coupler Hinge Kit for 3" x 5" Tongue #FHDPB350101 you will simply need to cut your current trailer tongue so that you have the desired length that is foldable (see attached customer photo). Because of this we…