Snow Plow Specs:
Features:
...Specs: Application: SUVs, trucks and minivans with a 2" front- or rear-mount hitch receiver and 8" to 16" clearance under the receiver Overall blade dimensions: 82" wide x 14-1/2...
Tech Tip:
Product is designed to fit the 2 in. receiver on the back of your vehicle.
More Information >Vehicle Snowplow: SS98GV
Price: $1,399.00
Custom Fit Hitch: 31038
Price: $240.05
Complete Kit:
Snow Plow Specs:
Front Receiver Hitch Specs:
Features:
...receiver Must have 8" to 14" clearance under the receiver Overall blade dimensions: 82" wide x 14-1/2" tall Rubber cutting edge dimensions: 6" tall x 1" thick Blade weight...
Installation Notes:
No drilling required for installation
Tech Tip:
Hitch is designed for vehicles with factory tow hooks.
More Information >Videos
for Snow Plow
Help Articles
for Snow Plow
Expert Answers
for Snow Plow
Hi Winston; there are two options to mount a snow plow on your 2010 Ford F-150 FX4. If you want to use the Detail K2 Summit II Snowplow #K2SUMM8826 you looked at you will need the Custom Mounting Brackets for Detail K2 Snowplows #K281521. The…
view full answer...Hey Bruce! The support bar mounting issue you pointed out is why I am going to steer you away from using the Curt Front Hitch item #31302 to attach a snow plow on your 2006 Yukon. Those support bars on the SnowBear Snowplow item #K2AVAL8219…
view full answer...Hey John, thanks for reaching out! It all depends on what snowplow you go with. For example, the Agri-Cover SnowSport LT #SS98GV requires 8" - 14" of clearance under the receiver, while the Detail K2 Snowplow #K2AVAL8826 requires a hitch…
view full answer...For your 2006 Honda Ridgeline, the K2 Avalanche plow is only a fit for the front mounted receiver. The custom mount brackets #K286110 are not a direct fit for your Avalanche plow but the mount does come with a crossbar and I've attached the photo…
view full answer...Hello Rickey. The Curt Class 2 Hitch #C12181 is currently the only custom fit aftermarket hitch available for the 1991 Mitsubishi Montero and it uses a 1-1/4" receiver. The only way to add a 2" receiver to this vehicle would be to use a…
view full answer...It is likely you can avoid the drain line when installing the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR by using the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications #MR43WR. I don't know exactly the…
view full answer...To install the Curt Hitch part #C31068 on your 2014 Ford F-150 with Ecoboost you will need to remove the air dam and then trim a small section of the lower fascia. See photo.
view full answer...That's a really valid concern about the install of the Draw Tite hitch #65079 on your 2021 Jeep Wrangler 4xe Rubicon. I personally am not a fan of snow plows that attach to front hitches as from experience here at etrailer they just aren't…
view full answer...The Detail K2 Snowplow for 2" Hitches #K2AVAL8219 does not include the Curt Front Mount Trailer Hitch Receiver #31241 that is needed for your 2020 Nissan Frontier. The plow will come with all the wiring needed for the winch on the plow. I…
view full answer...Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…
view full answer...Both the SnowBear Proshovel Snowplow, with Electric Actuator #SB324-168 and the SnowBear Personal Snowplow, with Electric Winch #SB324-080 will allow you to easily raise and lower the snowplow, and both come with an in-cab toggle switch, as well as a…
view full answer...Choosing a snow plow can be a bit intimidating because of all the choices available on the market. The snow plow I recommend for your 1997 Nissan Pathfinder is the Detail K2 with a custom mount: Detail K2 Rampage II Elite Snowplow - #K2RAMP8219ELT…
view full answer...Filter Products (2)
Contact and Help
What our customers are saying:
This site is top notch: Great prices, great service. Highly recommended.
Scott
Lafayette, CO