This Dutton-Lainson 2-speed, heavy-duty winch is designed for multipurpose horizontal pulling operations. third layer of line on the drum. Capacity is reduced as the line builds up on the drum.(3) Drum capacity based on cable size listed. (Cable is not included.) Winches are not to be used as hoists for
Durable winch has 2 speeds - 1 for quick pull in, the other for greater mechanical advantage when pulling heavier items. Corrosion-resistant zinc finish. For use with cable only (FWC7500100 - sold ... with a cable only (FWC7500100 - sold separately) Specs: Handle length: 10" Base dimensions: 8-1/8" long x 4-11/16" wide Gear ratios: 5.1:1 and 12.2:1 Maximum mechanical advantage: 102:1
Compact for use in tight spaces, this electric winch is perfect for use with a bale spike or as a vehicle winch. Winch is powered by your vehicle battery and includes remote with power switch that ... , high-strength, 7 strand x 19 gauge, galvanized aircraft cable Safety snap hook to keep load securely attached Wire cable can be swapped out for 2" wide strap Emergency crank handle comes standard Use in the
... marine applications. For use with cable only. shaft in gear Neutral, freewheel position for quick line payout without handle spinning Z-Max 600 zinc finish provides superior corrosion resistance 600-Hour salt spray rating For use with a cable only
Heavy-duty booster cable set with quick connects for work trucks Clamp end to quick connect Double-extruded, copper-clad aluminum wire for easy handling 2000-Amp-rated cast brass clamps with angled
This cable stopper for your recovery winch prevents damage and rattle caused by the rope hook hitting against the fairlead, and it prevents the motor from winding the rope in too far. Simply feed ... Features: Cable stopper prevents damage and rattle caused by rope hook hitting against fairlead Also stops winch motor from pulling cable in too far Large size makes it perfect for recovery winches
The best option we carry for a 10,000 lb boat is the Fulton High-Performance 2-Speed Trailer Winch #F142430 which has a 3,700 lb capacity with Cable #FWC7500100. The winch to boat size capacity is 2-to-1 though it can also be 3-to-1 if you have…
The Dutton Lainson StrongArm Winch part #DL24874 (also known as the SA12000), can have a strap or cable attached to it. What you described is how you would replace the cable with a 2 inch strap for this winch.
You can use pulley block #BDW20004 for your winching needs but it is rated at 4,000 pounds so if at any time the full weight of the boat is on the block it would exceed the capacity. For a higher capacity option I recommend #CU881081 which is rated…
Thanks for the information on your trailer. For your axle with brakes I recommend the Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 #AKHD-655-6-EZ-K if you have the spindles with the integrated grease…
The Dutton-Lainson StrongArm Electric Winch #DL25215 doesn't come with a mounting plate but you can use part #DL24055 or #DL24059 if your current mounting bracket doesn't match with the mounting hole pattern for this winch (see attached).
To replace your Shelby 5480A 2-speed winch with one that can be used in the manner you specified, it sounds like you need one with a handbrake. Since you also require one with cable and at least 3,200 lbs, the closest option is the Fulton…
You are correct in saying they don't make hand winches like that anymore. We top out at 3200 lbs with the Dutton-Lainson Hand Winch with TUFFPLATE Finish, Two Speed with Direct Drive #DL15440 for a manual option. Then Electric comes into play. We…
Your spindle and parts for it are going to be obsolete. I recommend replacing it with the more common BTR Spindle #TRU44FR. This particular spindle will allow you to use the Hub #AKIHUB-440-2-EZ-2K with 4 on 4" bolt pattern or a Hub…
Older classic trailers like your '64 Alpine Sprite may need new hubs in order to use the wheels and tires you wish for that vintage look. The only 4-bolt trailer hub/wheel bolt pattern we offer is the 4-on-4-inch format, like hub #AKIHUB-440-2-1K…
Based on the measurements you provided of your outer bearing you have the #LM11949 which is kind of an odd-ball bearing, and as such there are no hubs that we offer that use the #L44649 and #LM11949 bearing combination. You did not mention why you…
We can help you with a winch but not with a large wheel like in the picture you mentioned. They have several winches designed for boat lifts and those winches are compatible with the big wheel you mentioned. These include the following: Heavy Duty…
From the center of the shank to each end of the base of the B&W Companion 5th Wheel Trailer Hitch #BWRVK3500-5W is 18 inches. The entire length of the base is 36 inches.
This small cable stopper for your ATV/UTV winch prevents damage and rattle caused by the rope hook hitting against the fairlead, and it prevents the motor from winding the rope in too far. Simply ... Features: Cable stopper prevents damage and rattle caused by rope hook hitting against fairlead Also stops winch motor from pulling cable in too far Small size makes it perfect for ATV/UTV winches
This cable stopper prevents the loop on your Maxtrax winch rope from being pulled inside the fairlead while you wind in the rope. And it keeps the loop fastened so it doesn't hang loose while ... Features: Winchcable stopper keeps the loop on your Maxtrax winch rope from being pulled inside the fairlead Easy to use - place the stopper inside the loop and wind in the rope Magnet lets you
This small cable stopper for your ATV/UTV winch prevents damage and rattle caused by the rope hook hitting against the fairlead, and it prevents the motor from winding the rope in too far. Simply ... Features: Cable stopper prevents damage and rattle caused by rope hook hitting against fairlead Also stops winch motor from pulling cable in too far Small size makes it perfect for ATV/UTV winches
This small cable stopper for your ATV/UTV winch prevents damage and rattle caused by the rope hook hitting against the fairlead, and it prevents the motor from winding the rope in too far. Simply ... Features: Cable stopper prevents damage and rattle caused by rope hook hitting against fairlead Also stops winch motor from pulling cable in too far Small size makes it perfect for ATV/UTV winches
Cable fastener, 7/16" diameter.Features: For most pulling and brake type winches 7/16" Diameter cable fastener fits: Pulling winch models DL1100A-DL1402A Brake winch models B1200 and DLB800A Works with 3/6", 7/32"
3/8" Cable fastener for light duty winches.Features: For most pulling and brake type winches 3/8" Diameter cable fastener fits winch models DL400-DL900A Uses 3/16" diameter cable Note: Does not work with cables on worm gear winches.
Rope and Cable Clamp Rope and cable clamp for all D-L pulling and brake winches. Includes bolt and nut. Made in the USA. 24350 Rope and Cable Clamp by Dutton-Lainson Model 6285
Replaces the cable keeper for your Pro Series winch (PSKR10000301 or PSKR15000301) or add one if your winch did not come equipped with one originally.Features: Replaces the cable keeper for your Pro Series winch (PSKR10000301 or PSKR15000301) Allows you to add a keeper if your winch did not come equipped with one originally Note: Does not covert
Wiring a winch can be frustrating without the right cables. This ARB fitting cable kit gives you pre-terminated leads, making your install cleaner, faster, and more reliable. wire lengths in the field. Designed for ARB Bumpers: Built to support winch installs across a range of ARB bumper setups. Includes Three Cable Leads: Comes with three cables featuring ring terminals on
For heavy-duty applications that require cable, this steel winchcable has a break strength of 4,200 lbs and a working load limit of 1,400 lbs.Highlights Pairs with Winch: 25' long cable installs on your winch. Snap Hook: Quick and strong connection. Heavy Duty: Rated at 4,200 lbs break strength and 1,400 lbs safe working load limit
Replaces the 30" long nylon strap on your Bulldog Winch snow plow winch.Features: Replacement strap for Bulldog Winch snow plow winch (BDW78FR) 1-1/2" Wide orange nylon strap stretches to reduce shock on winch 30" Long strap attaches to plow blade with bow
For heavy-duty applications that require cable, this steel winchcable has a break strength of 5,600 lbs and a working load limit of 1,865 lbs.Highlights Pairs with Winch: 50' long cable installs on your winch. Snap Hook: Quick and strong connection. Heavy Duty: Rated at 5,600 lbs break strength and 1,865 lbs safe working load limit
Replacement zinc-plated wire rope for your Bulldog Winch heavy-duty hoist. Fits BDW64FR and BDW69AR hoists.Features: Replaces the zinc-plated wire rope for your Bulldog Winch hoist (BDW64FR and BDW69AR) 50' Long, aircraft-grade galvanized steel cable 3/16" Diameter cable is strong and abrasion
For heavy-duty applications that require cable, this galvanized winchcable has a break strength of 4,200 lbs and a working load limit of 1,400 lbs.Features: Designed for use with Fulton winches Made of strong galvanized cable Includes hook Specs: Dimensions: 25' long x 3/16" wide Maximum load (break strength): 4,200 lbs Safe working
Filter Results
