Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The purpose of the grease cap is to protect the bearing and the axle from any dirt getting into the bearing, which would then damage the bearing, hub and axle. So it is a good idea to have caps on your axle. To get the correct size cap you would need…
view full answer...For the tire size ST225/75-15 in the Load Range D like the part #274-000029 the weight capacity is 2,540 lbs at 65 psi. Which with just four of these you'd be over the 10k GVWR of the trailer you mentioned so you should be fine.
view full answer...Hi Lee, The #TREQ310 has a 4" vertical spacing compared to the Equa-Flex's #LC279687 2-1/2" spacing so that would cause an issue with your height. With the spacings for this equalizer the other options we offer would either decrease the…
view full answer...You do not need anything else to install the Curt trailer wiring connector part #C93FV on your 2023 Kia Telluride S.
view full answer...In the 235/85-16 tire size you referenced on the #AM10501 Americana tire, the load range F tire would be rated at 3960 lbs at 95 psi compared to the load range E rated at 3640 lbs at 95 psi. The load range F tires are definitely constructed to handle…
view full answer...The pictures of the Trailer Wheel Center Cap Plug, #CCP-60C, will appear to be a different size on different computer monitors and different screen resolutions. To determine if this cap is a suitable replacement you will need to compare the…
view full answer...As you mentioned the Trailer Wheel Center Cap Plug - Chrome #AM90082 is not a fit with a 2-1/16 inch diameter. The closest we will have is #CCP-60C with a 2-3/16 inch diameter, so I recommend replacing the entire cap. We have the Trailer Wheel Center…
view full answer...If you are referring to two white wires from the brake magnet that are coming from the rear of each electric brake assembly, then it would not matter which wire is connected to ground and which wire is used for the brake feed. The magnet that…
view full answer...IMGL when referencing the Kwikee steps stands for Integrated Motor Gear Box Linkage. In October of 2004, Kwikee Steps made by Lippert changed their system from the separate parts to the integrated system. Prior to this there was a cast linkage…
view full answer...No it does not matter which wire on the Replacement Trailer Brake Magnet Kit for Dexter and Hayes / AL-KO 10" Trailer Brakes #BP01-110 is used as positive or negative.
view full answer...You are correct that on the Breakaway Battery Harness for Titan BrakeRite II Electric-Hydraulic Actuators - Tandem #T4834402 the black wire with the red terminal will attach to the positive connection on the battery while the blue wire with the white…
view full answer...I spoke to my contact at Titan and he informed me that you would need the part #T4834402 as it is a 32 inch battery harness for tandem batteries like what you have.
view full answer...Filter Your Search
Contact and Help