Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The best option we'd have to replace the fenders on your trailer would be the Fulton Single Axle Trailer Fenders with Top and Side Steps part #F008584-2. The measurements we have for this fender appear to be very similar to that of the brackets…
view full answer...I'd be happy to help you with that. For starters, the #F008584-2 fenders you'd looked at are designed for 14 inch wheels, you'd be better served going with the #F008585-2 which are designed for 15 inch wheels like the ones you have.…
view full answer...Based on your measurement and image it appears you will need the Fulton Single Axle Trailer Fenders with Top and Side Steps which we have in Black #F008584-2 or Silver #F008594-2. These fenders separate the side mounting holes 30-1/4" from front…
view full answer...Based on your images and measurements which are a great help I recommend going with the Fulton Single Axle Trailer Fenders #F008584-2. Instead of using your included mounts I recommend cutting them off the frame as they are far to close to your tires…
view full answer...Yes, the 40" Vinyl Coated Safety Cables with Clevis Hook (Qty. 2) by Dutton-Lainson, 6,500 lbs is labeled under Item #DL20119. This product is a pair of 5/16 " vinyl-coated cables with safety hooks at one end. These are for use on trailers…
view full answer...The Roadmaster 80" Coiled Safety Cables - Double Hook part #RM-653 has a capacity of 10,000 lbs as a pair. They are designed for flat towing a vehicle. If you need more weight capacity in a cable, I recommend Demco coiled safety cables part…
view full answer...The Bottom Support Plate for 2-1/4" OD A-Frame Jacks - 5,000 lbs #JSP-100 you mentioned is 1/8" thick, has a hole diameter of 2.29", 8-3/4" long at the back, 5-1/2" long at the front, the diagonal sides are 3-7/8", and…
view full answer...I recommend having the Demco A-Frame Trailer Coupler #DM14791-97 welded on in place of the Sleeve-Lock #CA-5196-B style coupler that you currently have. This Demco coupler uses a 2" hitch ball the same as your current coupler and is rated for up…
view full answer...The A-Frame Trailer Coupler #CA-5210-B will have the exact same yoke latch as your current Ram coupler, so it will not be adjustable, unfortunately. With that said, if you were over doing the weight capacity and can swing the Dutton Lainson A-Frame…
view full answer...The inside dimension of the Demco A-Frame Trailer Coupler w/ Jack Hole, part #DM14791-97 is 2-12 inches. I have attached a photo of the underside of the coupler with the dimension noted for you.
view full answer...I recommend using the Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs #AKFBBRK-35-D, which will work with your current setup and are perfect because the Dacromet plating is designed to withstand…
view full answer...You can use safety cables instead of chains if your trailer is under the weight rating of the cable. The safety cables are made from nylon coated steel. I do not recommend using the Curt 7500 lb rated safety cable part #C80176 because that would be…
view full answer...Related Searches
Filter Your Search
Contact and Help