Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
While we do have a great solution for you, the Thule TracRac SR #TH57RV is problematic for a couple reasons when used with the BAKFlip MX4 #BAK448227 on your 2020 Ram 1500 (short bed without RamBox). Since you are absolutely correct that the…
view full answer...I have another option for you, but since the BAKFlip MX4 Hard Tonneau Cover #BAK448227 you have on your 2021 Ram 1500 does not have the t-tracks for cross bars there is not a bike rack that will be able to be installed above the bed of your truck.…
view full answer...Coupler #CA5100B measures 9-1/4 inches wide at the widest part. I have included a picture showing some dimensions for you. For coupler #CA5400 is measures 11 inches wide at the widest point. I have included links to the video reviews of these…
view full answer...The latching mechanisms of couplers can pretty easily get corroded or dirty to the point they become difficult to operate. Best bet is to spray down the mechanism liberally with a spray lube like WD40 and see if that frees up the latch to allow it to…
view full answer...Trailer wiring generally uses 16 gauge wire, part #16-1-1. However, with a long trailer like yours you may want to go with a larger like 14 gauge #DW07550-1 or even 12 gauge #12-1-1. Each size is sold by the foot. You will need to have the lights at…
view full answer...Using the Brophy Hitch Reducer and Extender #HR26 will drop that 1,200 down to this extenders max tongue weight with WDH of 1,000 lbs. The other thing you have to keep in mind is the reduction in hitch capacity since you're using an extender.…
view full answer...The capacities listed are specified for the way you use the trailer hitch, part #C31083. If you are using the hitch for a trailer the capacity is 5,000-lbs due to the stress vertically as well as the stress of pulling a trailer. The 9000-lb straight…
view full answer...I had a hard time finding a lot of information using the two part numbers you found both on the lens and the light base. It looks like the base number may refer to the Optronics Trailer Light #MC32AB, for which the correct replacement lens is part…
view full answer...It looks like the Hot-Line LED Third Brake Trailer Light Bar w/ Reflector #328-003-6017X might be the best replacement as it has an overall length measurement of 15-1/4" and width measurement of 1-1/4". It also looks to have the same basic…
view full answer...If you do not have the boat on the tandem axle trailer, what you have mentioned is how the trailer suspension will look without a load on it. The equalizer will be up in the rear and the rear spring will be tilting the axle forward. The reason is…
view full answer...Normally the SAE number isn't a reliable way to pick out replacement lenses, but we know that the #A32RB is the correct replacement for a lens marked SAE-A-P2-DOT-02 like what you have. For an all new assembly you'd want the part #MC32RB.
view full answer...The difference is aluminum hot water anode rods do not corrode as fast as magnesium because aluminum corrodes slower. Between the Camco hot water anode rods we carry, there is a size difference in the diameter, and the correct one depends on the hot…
view full answer...Related Searches
Filter Your Search
Contact and Help