Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Demco recommends using a 3/16" or thinner Lube Plate #16721 with their Autoslide 5th Wheel Trailer Hitch #DM8550035. With the addition of the Demco Autoslide Locking Plate for Lippert Rhino Pin Boxes #DM76FR you have I recommend using a dry lube…
view full answer...Congrats on the new trailer! Yes, you will need a locking plate to use the Demco Autoslide item #DM8550024 with a Rhino Pin Box. You will want the Demco Hijacker Autoslide Locking Plate for Lippert Rhino Pin Boxes item #DM76FR. The Demco Autoslide…
view full answer...I definitely see where you're coming with when it comes to towing using the 18K Demco Autoslide 5th Wheel Hitch #DM69GV and Locking Plate #DM76FR for your 2022 Ram 3500. On questions like this I always like to refer back to the owner's manual…
view full answer...Yes, all you'll need is the Demco Autoslide Locking Plate for Lippert Rhino Pin Boxes #DM76FR to make your new camper's Lippert Rhino Box compatible with your Demco Hijacker #DM8550034 5th wheel hitch.
view full answer...The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…
view full answer...It sounds like you actually just need the bulb seal, not the wiper seal. In which case you just need to measure the channel width and length then you can pick out one of the Rubber Bulb Seals for RV Slide Outs like part #SR24FR. I have attached our…
view full answer...I have a different option for you, but the Trailer Valet JXS Jack #TV64FR is not recommended for use in salt water per my contact at Trailer Valet. Instead you will want to go with the Fulton Marine Jack - Square Tube, Fixed Mount - 28" Lift -…
view full answer...For your Aluma 6810 HBT trailer, I recommend the Erickson Horizontal E-Track - Zinc Coated Steel - 2,000 lbs - 5' Long - Qty 1 #E19148 along with the E-Track Backing Plate - Zinc Plated Steel - 6" Long x 6" Wide #e96RR. This will save…
view full answer...You are 100% correct! The closest match and best option to upgrade your 7.50-16 LT bias ply tires, is going to be an ST235/85-16 radial tire, like the Kenda Karrier #AM32743B you were checking out. This tire is pre-mounted on a 16 inch diameter by 6…
view full answer...The Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers #EZ-JACK can fit trailers with leaf springs. If you check out the picture I attached you can see it used on a leaf spring trailer just like yours.
view full answer...Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…
view full answer...Choosing a ball mount with the proper rise or drop is not an exact science. I typically recommend allowing for 1 to 2 inches for sag once the trailer is coupled. This figure can increase of decrease depending on the trailer tongue weight and the…
view full answer...Related Searches
Filter Your Search
Contact and Help