... lens. Surfacemount. 2-Wire pigtail. bulbs to replace - no brittle filaments Durable die-cast aluminum housing and polycarbonate lens Clear lens with white LEDs Compatible with 12V DC systems Surfacemount - hardware included 2-Wire pigtail
7-9/16" x 3-5/16" Oval. Waterproof trailer utility light provides bright white light where needed. Durable polycarbonate housing and lens. Surfacemount with built-in flange - hardware not ... Features: Low-profile, oval utility light provides bright white light for your application Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and
6-1/2" x 2-3/8" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate lens and housing. Surface ... power and ground. And the plug covers the unused third point on the connection to seal it against dirt and moisture. Surface-MountLightSurface-mount trailer lights install using a flange or bracket with
7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - ... polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Red lens with red LEDs for tail light Clear lens with white LEDs for backup lightMounts on surface of trailer with built-in
4-5/16" Round. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Recessed mount with grommet (sold separately). Accepts ... against dirt and moisture. Recessed-MountLight Recessed-mount trailer lights install underneath a housing or a grommet (A45GB - sold separately). These lights will extend into the mountingsurface and
7-9/16" x 3-5/16" Oval. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surfacemount with built-in flange - hardware not ... trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-MountLight
Surface-mount puck light brightens up a closet, walkway, or kitchen countertop in your RV. Warm white LEDs are more energy efficient, last longer, and burn brighter than incandescents. The light ... . Surface-Mount, Bolt-On Installation is Easy This surface-mount puck light is incredibly easy to install as an upgrade or direct replacement of your existing light. To access the bolt holes, pull the lens up and
2-1/2" Diameter round. Incandescent trailer light serves as a side marker light and clearance light. Durable polycarbonate housing and snap-on lens. Surfacemount to trailer. 1-Wire design. PC ... lens Amber lens over incandescent bulb Compatible with 12V DC systems Surfacemount to trailer - hardware not included Single wire design grounds through mounting hardware PC rated Specs: Dimensions
18-1/4" x 5-3/4" Rectangle. LED dome light provides bright light in extreme temperatures. Designed for refrigerated trucks and trailers. Durable polycarbonate housing and lens. Surface ... Features: Low-profile dome light provides bright white light for refrigerated trucks and trailers Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts to the surface of the trailer ... White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surfacemount with built-in flange Hardware not included 3-Wire pigtail hardwires into
11" x 8" Rectangle. Weatherproof trailer light serves 4 functions: stop, turn, tail, and backup light. Built-in reflector between lights. Surfacemount with grommet - hardware not included ... warranty Surface-MountLightSurface-mountlights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a
7" x 2-3/4" LED trailer tail light with chrome bezel functions as a stop, tail, and turn signal light. Durable polycarbonate housing and lens. Hard-wired design with stripped leads. Surface ... Hard-wired design with stripped leads Surfacemount Works with 12 volt systems Meets FMVSS 208 requirements Specs: Overall dimensions: 7-1/2" wide x 3-1/4" tall Light dimensions: 7" wide x
20-1/2" Long x 1" tall. Waterproof trailer light serves 3 functions: brake, tail, turn. Low-profile Thinline light fits in tight spaces. Surfacemount on 19-5/8" centers - hardware not ... light can fit in tight spaces Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great
18" Low-profile, LED tail light displays brake, tail, and turn signals on your RV that's over 80" wide. It mounts on the surface of the motorhome and hardwires with the included pigtail ... Features: Low-profile RV brake, turn, and tail light Weatherproof White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Mounts on surface of
2-1/2" Round. Low-profile LED trailer light serves as either a side marker or clearance light. Built-in reflex reflector. Snap-on polycarbonate lens. Surfacemount with included gasket - ... lens over white LED Compatible with 12V DC systems Surfacemount to trailer - hardware not included Attached gasket helps create a weathertight seal 2-Wire pigtail hardwires into trailer P2 rated light
2-1/2" Diam x 1-1/16" D; PC-rated; corrosion resistant; replaceable lens and bulb; surfacemount on 1-1/2" centers; 1-wire; 1-bulb incandescent corrosion. The light features a replaceable, snap-on lens and easy-to-replace bulb. This lightsurfacemounts on 1-1/2" centers. The light contains a single lead wire for power and is grounded through
13-5/8" x 10-7/8" Rectangle. LED utility light illuminates an exterior area with bright white light. Durable aluminum construction with silver powder coat resists corrosion. Mounts flush to ... Features: Low-profile, rectangle LED lamp delivers bright, focused light to illuminate wide areas Flush-mount design delivers a sleek, unobtrusive look LEDs make great replacements for incandescent
Wire this waterproof dome light to a switch in your RV so you can easily turn the light on and off when you need to do the dishes after dinner. Cool white LEDs are more energy-efficient, last longer ... , including the drive method or any lenses or reflectors. Surface-Mount, Bolt-On Installation is Easy This surface-mount dome light is incredibly easy to install as an upgrade or direct replacement of your
Stay visible when towing your boat trailer at night with this submersible, 1" diameter LED light. This red light can function as a rear side marker or clearance light. PC rated. 9" Long ... than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the rear corner of your trailer to act as both.
... . Surfacemount with flange. 3-Wire pigtail. over white LEDs Mounts on surface of trailer with built-in flange - hardware not included 3-Wire pigtail DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Overall
Wire this waterproof dome light to a switch in your RV so you can easily turn the light on and off when you need to do the dishes after dinner. Cool white LEDs are more energy-efficient, last longer ... fixtures can produce. Effective lumens, on the other hand, represent the usable brightness of the entire light assembly, including the drive method or any lenses or reflectors. Surface-Mount, Bolt-On
2-1/2" Round. Trailer light functions as a clearance and side marker light when properly mounted. Built-in reflex reflector. Durable polycarbonate base and lens. Mounts on surface of trailer ... Red lens with red LEDs Compatible with 12V DC systems Mounts on surface of trailer - no cutout required 2-Wire pigtail includes power lead and ground wire PC rated light produces a 180-degree beam
18-1/4" x 5-3/4" Rectangle. LED dome light provides bright light in extreme temperatures. Designed for refrigerated trucks and trailers. Durable polycarbonate housing and lens. Surface ... polycarbonate housing and lens Clear lens with white LEDs Compatible with 12V DC and 24V DC systems Light output stays consistent at all operating voltages Surfacemount - hardware not included 2-Wire design
7-1/8" Incandescent transit light acts as a brake and tail light. Mounts to the surface of your bus or truck and hardwires to your vehicle. The included gasket creates a weathertight seal ... Features: Round stop/tail light Incandescent bulb is easy to replace Red screw-on lens Steel housing Foam gasket creates a weathertight seal Surfacemount - hardware not included Power lead and
Your internet site is very well organized and easy to use...My order was shipped very promptly and included everything I ordered...All in all this was a simple procedure for what can be a complicated order. I would use your company again or recommend you to others. Your selection was broad and your prices fair.
Filter Results
