Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Steve, thanks for reaching out! The Roadmaster Direct-Connect Base Plate Kit #RM87NQ fits your 2025 Ford Maverick as long as it's the Hybrid model that doesn't have the engine block heater. It doesn't come with the 6-Pin connector,…
view full answer...Hey Ron! For your 2025 Ford Maverick I recommend going with the Roadmaster InvisiBrake Flat Tow Brake System #RM-8700 with the Roadmaster Stop Light Switch Kit #RM87GR and the Roadmaster Brake-Lite Relay Kit for Towed Vehicles #RM-88400. For wiring,…
view full answer...Hi Russ; you pretty much have everything you need right there with the exception of a few parts. I'm going to go ahead and list it all out here with links to make it easy for your to manage. You will need the following: -etrailer Invisible Base…
view full answer...Yes, it does Gary! The Blue Ox Base Plate Kit item #BLU86HR has been confirmed to fit the 2025 Ford Maverick hybrid. I have linked a installation video below along with the instructions so you can see how to get it set up. If you have any additional…
view full answer...Picking between the ThinLine LED trailer taillight part #STL64RCB which is clear and the #STL64RB which is red really comes down to which you like the look of better. If you like the look of the clear lens then go with it, I would probably go with…
view full answer...The GloLight Thinline LED Trailer Tail Light #STL179RB is the closest we have to the Bargman LED tail lights 47-54-001. We no longer carry this Bargman light at this time. The GloLight is 17" long with 28 LED diodes versus the Bargam which is…
view full answer...Yes you are correct in your assumption. On the Optronics Thinline LED #STL64RB, the Red wire is for turn signal, so this will go either the green or yellow wire on your trailer. The black wire is tail lights so this would go to the brown wire on your…
view full answer...Hopkins Engager Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Top Load #20400 can have the pin mounted on the coupler. The angle should be as aligned as possible with the point you are connecting to and be slightly shorter…
view full answer...If where you plan to mount the clearance lights is metal that touches the trailer frame then a 1 wire clearance light would work just fine. The difference between the 1 wire and 2 wire lights is that the 1 wire lights ground through their mounting…
view full answer...The brakes shouldn't necessarily lock up, but the brakes should quickly bring the trailer to a safe stop. The weight of the trailer shouldn't matter if the breakaway kit and the trailer brakes are working properly. All trailer from utility to…
view full answer...If you are replacing a trailer marker/clearance light that only has one wire with a trailer marker/clearance light that has two wires like the part #MCL44AB that means the previous light grounded though the mounting hardware and the new light grounds…
view full answer...The lighting on your 1987 camper van used a single power wire input and would ground the lamp through the lights mounting bracket. This is how the Optronics LED Trailer Clearance and Side Marker Light #MCL44AB1 would connect. The Optronics LED…
view full answer...Filter Your Search
Contact and Help