Smooth and powerful hydraulic jack lifts your heavy load without your help. Just press the button on the corded remote control to lift and lower your trailer. The large, pivoting foot pad stabilizes the jack even on rough terrain. power unit comes attached to the jack Convenient corded remote control switch Large, pivoting foot pad stabilizes on uneven surfaces Squaretube Durable exterior-grade black finish Easy bolt-on
Weld-on jack has a retracted height of 25-1/8" and an extended height of 40-1/4". Square design provides superior side-load support. Offers 15-1/8" of screw travel and 13-3/4" of ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Sidewind handle has
Fixed leg, square jack with pipe mount offers increased side-load strength and durability. Jack has 15-1/8" retracted height and measures 9-1/4" from mounting bracket to top, excluding ... Features: Superior side-load capacity compared with round jacks Outer and inner tubes overlap for additional strength when jack is fully extended Square design provides additional support for side
This heavy-duty, sturdy steel jack has easy-to-access grease fittings, a drop leg with spring return and an integrated screw stop to prevent damage to the screw and the nut. Sidewind crank sold separately. outer tubes are weather resistant Direct-weld design Sidewind crank sold separately Standard footplate included Specs: Bracket height: 28-1/2" Retracted 54-1/2" Extended Total lift: 26"
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for 13-3/4" of lift in addition to the 15" of screw travel. Durable screw offers increased strength. Built-in grease zerk allows effortless greasing. Black powder coated finish on inner and outer tubes Sidewind handle has curved edges - no sharp ends Footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to
Marine-grade electric jack lifts and lowers your trailer with the push of a button. Sealed motor cover and rust-resistant finishes fend off corrosion. Built-in LEDs illuminate your frame in low-light situations. Total lift includes 8" drop leg. to a 12-volt battery (sold separately) Rust-resistant, inside and out Outer tubing has a Sharkskin finish with a 1,200-hour salt spray rating Inner tubing has a clear Z-Max finish with a 600-hour salt
Footplate and 5/8" diameter pin are included with this round, swivel-mount jack. Ideal for agricultural and commercial uses. Jack has 15-3/8" retracted height and measures 6-3/8" from mounting bracket to top, excluding handle. Included pull pin holds jack in place Precision-fitted parts provide exceptional stability and reliability Sidewind handle has smooth, ergonomic design for easy cranking Outer tube is gray-paint finished
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. Winding handle included.
Drop leg, square jack offers superior side-load strength and fits any standard A-frame coupler. Crank included.Features: Superior side-load capacity compared with round jacks Outer and inner tubes overlap for additional strength when jack is fully extended Square design provides additional support for side
Replacement jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Welds on.Features: Replaces 1 Ram square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) sold separately Works with units offering up to 3,200 psi extension and
Customize your Fulton F2 A-frame trailer jack with this wide-track, removable wheel. Offers superior stability and a corrosion-resistant, SharkSkin-finished base that is ideal for marine applications. Pin included.
The counter-balance valve integrated into this hydraulic jack eliminates drift and retraction while your trailer is stationary. It's ideal for a seasonal trailer that may sit for awhile, and it makes a great upgrade. Right/street-side leg only. loads Large, pivoting foot pad stabilizes on uneven surfaces Squaretube Durable exterior-grade black finish Easy bolt-on installation Specs: Screw travel: 24-1/4" Bracket height: 34-7/8"
Powerful hydraulic jack with self-contained pump and power unit lets you lift heavy loads with a press of a button. Pivoting foot pad stabilizes the jack on rough terrain. Self-contained pump and power unit comes attached to the jack Pump offers up to 3,200 psi extension and 1,500 psi retraction pressures Pivoting foot pad stabilizes on uneven surfaces Squaretube with durable
The counter-balance valve integrated into this hydraulic jack eliminates drift and retraction while your trailer is stationary. It's ideal for a seasonal trailer that may sit for awhile, and it makes a great upgrade. Left/curb-side leg only. loads Large, pivoting foot pad stabilizes on uneven surfaces Squaretube Durable exterior-grade black finish Easy bolt-on installation Specs: Screw travel: 24-1/4" Bracket height: 34-7/8"
Replaces the inner tube and spring-return drop leg for your etrailer square, direct-weld jack with spring-return drop leg (TJD-12000SP-F2, TJD-12000SP-R2, or TJD-12000SP-R2NH).Features: Replaces the inner tube and spring-return drop leg for your etrailer square, direct-weld jack with spring-return drop leg (TJD-12000SP-F2, TJD-12000SP-R2, or TJD-12000SP-R2NH) Quantity: 1
Replacement right/street side jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Bolts on.Features: Replaces the right-side RAM square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) and left leg (e63VV) sold separately Works with units
Replaces the footplate for your Bulldog trailer jack with a 2" inner tube diameter. Rated for between 2,000 lb and 5,000 lbs. Measures 2" tall. Includes the attachment pin.Features: Replaces the footplate for your Bulldog trailer jack with a 2" inner tube diameter Includes the attachment pin Specs: Height: 2" Weight capacity: 2,000 lbs to 5,000 lbs Fits
Replacement left/curb side jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Bolts on.Features: Replaces the left-side Ram square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) and right leg (e73VV) sold separately Works with units
Replaces the inner tube, drop leg, foot, and pull pin for Curt heavy-duty, direct-weld square jack (28512).Features: Replaces the inner tube, drop leg, foot, and pull pin for Curt heavy-duty, direct-weld square jack with 10,000-lb lift capacity (28512) Specs: Inner tube dimensions: 3-1/2" x
Replaces the footplate for your Bulldog trailer jack with a 2" inner tube diameter. Rated for between 2,000 lb and 5,000 lbs. Measures 6-3/16" tall. Includes the attachment pin.Features: Replaces the footplate for your Bulldog trailer jack with a 2" inner tube diameter Includes the attachment pin Specs: Height: 6-3/16" Weight capacity: 2,000 lbs to 5,000 lbs Fits
Replaces the gears for your Bulldog sidewind, square-tube jack (BD195356, BD195362, BD195351, BD195352, BD195354, BD195368, or BD195369).Features: Replaces the gears for your Bulldog sidewind, square-tube jack (BD195356, BD195362, BD195351, BD195352, BD195354, BD195368, or BD195369) Includes all that you need to replace or repair
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear. retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on
Weld-on jack has a retracted height of 24-1/4" and an extended height of 39-1/2". Square design provides superior side-load support. Drop leg offers 13-1/2" of lift on top of the ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Topwind handle has a
Filter Results
