Result: seal cross reference

Sounds like there is an electrical short somewhere in the jack circuit. Inspect the trailer jack wiring to see if there is any loose connections and frayed or damaged wiring that could be shorting causing the fuse to blow. Also, if the jack has been…

To add a gooseneck hitch to your 2024 GMC Sierra 2500 with a 6-3/4' bed, I recommend the B&W Custom Underbed Installation Kit item #BWGNRK1020. It has a massive 30,000 lbs capacity and fits both the 6-3/4' and 8' bed lengths. The…

I highly recommend the B&W Gooseneck hitch for your 2024 Chevy Silverado 2500, which is the following part: - B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1020 This is a custom fit hitch that allows you to store the hitch ball…

Hey Daniel! Thank you for providing that information. The serial number from the axle tag is typically required but, in this case I was able to find the bearings and grease seal without it. Your 2016 Rage'n 21FS uses #25580 inner and #LM67048…

We do have a compatible grease seal for your 168255TC oil seal, however, we do not carry rubber coated seals in this size. The 168255TC oil seal was designed to work with oil bath hubs on a 3,500 lb axle. For the most part, axle manufacturers have…

Tom, unfortunately the controller 2020003067 is not going to work in place of the 289252, so It would need to be replaced with the 289252. I have also confirmed this with Lippert to make sure.

When you replace your Brakes #23-450-451 it is a good idea to inspect the bearings at that time. The bearings and races will only need to be replaced if they are damaged or grooved. A visual inspection of the seal will tell you if it leaking or you…

Dexter and Hayes/Al-Ko make quality brakes and one isn't necessarily better than the other. The majority of the time, the biggest factor in determining the life of a brake is going to be the load it is asked to help stop, the ruggedness of the…

We sure can! The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.

The Replacement Converter #PD4655V is the correct converter for your Parallax 7355 power center. I do not see that WFCO shows their 8955PEC being acceptable to use with your Parallax 7355.

Though I may have an option for you, I was also unable to find any info on the T-23972 seal you currently have. With that being said, the Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2 #RG06-050, or #58846 as…

Thanks for reaching out, Doran! The toggle switch for your FIC-ETJ3500 is pretty unique and it looks like for a direct replacement you'll need to reach out to FIC Jack Services directly at 1-877-957-1501. You might consider looking at and…