Quickly and easily convert your B&W Turnoverball gooseneck hitch (BWGNRK1500 - sold separately) to a sturdy 5th-wheel trailer hitch for your flatbed truck. Dual-jaw hitch removes without a trace for full bed access.
The dual jaw on this sturdy 5th-wheel hitch provides excellent jaw-to-king-pin contact. Wide-stance base offers fore/aft and height adjustments. Hitch removes easily for full bed access.
A keen observation indeed, Brett. The mounting hole spacing on the Square D-Ring Tie-Down Anchor #ABS69FR is 3" horizontally and 3-1/4" vertically. I edited a picture for you to help illustrate.
We do not sell a complete kit but we do sell a backing plate that is compatible with the Square D-Ring Tie-Down Anchor item #ABS69FR. It is the Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor item #BP05.
Hey Joe, Does your Bradford flatbed have a recessed gooseneck hitch already installed or is it just the flat bed right now? If not, you're going to need to cut out space for a gooseneck hitch like the B&W #BWGNRK1500 to be installed. From…
Yes, the B and W Companion base part #BWRVB3500 does work with all Turnoverball gooseneck hitches. This is just the base. For a complete hitch you'd need the part #BWRVK3500.
You are correct, the Ranch Hitch, #3100, adapter base does thread onto a collar system, see drawing, comprised of a collar and 2 wedges that fit around and into the recessed portion of the trailers king pin. When the adapter is tightened onto the…
The ID for the TImken 1380 is .875 and the 17520/17580 is .625. None of the hubs we offer are compatible with spindles that have a diameter that small. Honestly, you'll likely have a difficult time locating replacement hubs compatible with that…
The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…
Even though the Blue Ox Patriot #BLU37TR and the Roadmaster Even Brake #RM-9400 are very similar systems I recommend using the Patriot II. It is easier to set up, uses less power so it will take much longer for this system to drain your battery, and…
The Acura MDX is the 'sister' vehicle to the Honda Pilot. The MDX and Pilot typically don't have problems with the hitch interfering with the liftgate sensors. I believe you're thinking about the RDX/Honda CR-V which frequently has an…
Routing out a channel in the trailer like you describe is a very slick method of attaching the e-track that works very well. The e-track is .430 or a bit less than 7/16 of an inch thick (see photo).
The Brophy 5 Slot Tool Rack for E-Track - Black Powder Coated Steel #ETTH is 24 inches long edge to edge. The inner diameter of each slot is 2 inches and the fittings that mount to your E-Track are 16 inches on center. I've attached a couple…
Filter Results
