Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which you…
view full answer...Since your Grand Design 17MKE has a GVWR of 6,395 lbs, you more than likely have 3,500 lb axles. That being the case, the Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2560 will not fit your travel trailer. Although Roadmaster does not…
view full answer...We have a 2-1/4 inch lift kit with part #RR23QX that would work great on your trailer to give it an additional 2-1/4 inches of lift. You might be able to raise the pin box in the frame it attaches to on your trailer to lower the nose as well. As long…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...Hey Rob! Both the 25-1/4" long item #DX95CR and item #e44SR springs will work if you're replacing a 25-1/4" long leaf spring. They're close enough in capacity so long as you're not using too light of a spring with the 4,400 lbs…
view full answer...Pierre, the Bauer Products Camper Door Lock #BA65FR will work great as a replacement for your current TriMark door lock. This door lock will fit cutouts that are 5-1/4" wide and 4-1/2" tall, and can also be keyed alike to other Bauer locks,…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...So it looks like the Lippert Slam Latch for RV Doors #LC54PJ will fit into a 3-3/4" x 3-3/4" cutout hole, and a 1/2" thick door. With your door being a half inch thicker, this slam latch is not going to work. Instead, I recommend going…
view full answer...Lippert is deeply in the pockets of pretty much every trailer/motorhome manufacturer so they most likely installed the repeater block so that you'd be more inclined to purchase their sensors over other brands. The Tire Linc OneControl TPMS w/…
view full answer...Hey Harry! For a 5/8" compart lock that can be keyed alike you'll want the Cam Lock for B&B RV Compartment Door item #BM33VR. These are sold individually so you'll want to order as many as you need. They will all be controlled by the…
view full answer...Thanks for reaching out, Doran! The toggle switch for your FIC-ETJ3500 is pretty unique and it looks like for a direct replacement you'll need to reach out to FIC Jack Services directly at 1-877-957-1501. You might consider looking at and…
view full answer...Related Searches
Filter Your Search
Contact and Help