Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I went to Vitrifrigo and found a diagram for their DP150i Double Door RV Mini Fridge w/ Freezer item #VT94FR which I have attached below. Here are the dimensions you are looking for: Freezer Width - 14.9" Height - 7.2" Depth - 14.9"…
view full answer...I've attached some dimensions below to help you determine fitment of the Brophy Camper Scissor Steps #AS24 with your truck bed camper. The mounting bracket is 24" long x 1" tall (1-3/8" tall if you include the V-Clamps) so…
view full answer...The difference between the two trailer tire sizes is that the letter D in the first size you listed ST205/75D15 stands for bias ply and the letter R in the tire size that they put on your vehicle stands for radial. Radial tires are preferred over…
view full answer...I am not able to find specs on a Sylvania Model SR-11092 "G". However, I can locate information for a SR-11092"B" with dimensions of 12-1/4" tall x 20" wide x 13" deep. For this, the Greystone Microwave part…
view full answer...We've seen this issue before on an older camper that had the screen door installed a little lower than how they are now. An installer here actually had this exact problem. If your door is close to closing, a couple suggestions that you can try…
view full answer...Here are some tips we've gotten from MORryde in the past for your situation where the threshold won't let door shut. Verify the distance from the threshold to the front of the StepAbove hinge plate it should be 15/16". There should also…
view full answer...Thank you for reaching out - you've come to the right place! Your local shop is correct. You need to use a base rail kit that has a 4-point connection and a Sidewinder (or similar) pin box with the rotating turret for this application. The…
view full answer...It does seem to be a trend that RV bumpers are getting flimsier due to cheaper/thinner materials, so I completely understand not trusting it to carry your expensive e-bike. What I recommend is the bolt on Curt #13703 which fits frames that are up to…
view full answer...At one point the Flexco Steps part #SMFP-2100 that you referenced were listed as having the same width you need of 26-1/8 inches between the mounting brackets. We now know that the dimension is really 27-5/8 inches. Since we don't have a step…
view full answer...The MORryde StepAbove Fold-Down Steps for 27-3/4" to 30-1/4" RV Door Frames - 9" Drop Item #MR78RR will fit your 30" door width with 36" entry height. There isn't a strut assist for this size but you won't have any…
view full answer...Thanks so much for that information; I believe you were referring to MORryde steps, and we do have the exact steps you need for a 28-1/4 inch flange to flange doorway width and 35-1/4 inch entry height, which are the following triple steps: - MORryde…
view full answer...Thanks for the pictures! I spoke with Lippert in regards to your Solera Smart Arm 12V Power RV Awning #LC517505, and they have informed me that the correct gear pack is the: -Replacement Gear Pack for Lippert Solera Awning Motor #LC78VR.…
view full answer...Related Searches
Filter Your Search
Contact and Help