Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I sure can Mark and thanks for the information! The Dexter 3,900 lb torsion axles use the same bearings as 3,500 lb axles. Which means the correct replacement bearing kit is the item #BK2-100 you were looking at. You'll need one set per hub. Your…
view full answer...Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…
view full answer...Thank you for providing a photo of the A-frame on your 2016 Riverside trailer. You will be fine using the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier #CC-275 since it will work on A-frame trailers from 14- to 55-inches wide, as…
view full answer...I reached out to my contact at Lippert about the installation of the Solera 16' Replacement Awning Fabric - Sand Fade w/ Black Weatherstrip #LCV000334398 and he said that the side of the awning with the 2 tracks will be connected to your RV and…
view full answer...For a bright white RV awning LED light strip we have the part #LC674282 which is 15 feet long but can be trimmed down to 13 feet like you need.
view full answer...For the replacement Vista Lippert Light you have you'd need the part #LC24PJ.
view full answer...Sounds like your trailer axles are a bit too short if the inner sidewall is rubbing on the frame of the trailer. Did you recently change to a wider tire? That could be the cause too. Your equalizer being angled shouldn't cause the issue you…
view full answer...Sounds like you went with axles that are too short for your trailer. Your best option is to replace the axles with ones that are longer so that the tires stop rubbing. You might be able to go with a skinnier tire setup but I would need to know what…
view full answer...For your 2021 Tesla Model Y I recommend the Curt Echo Wireless Trailer Brake Controller #C51180. The echo plugs in line with your existing 7-way at the back of your vehicle. It is controlled through your smartphone via Bluetooth. Since this does not…
view full answer...Yes. You can make connections to the battery on your 2020 Tesla Model Y in the same manner that you would on a standard, non-EV. You will need to start with a 4 way like the Tekonsha ZCI Kit #119250KIT which offers you a solution that doesn't…
view full answer...It sounds like you have a Leland 7920 pin box. This matches all of the specs you gave except the 2b measurement which is the height different between one set of bolt holes to the row that is either one set higher or one set lower. The Leland 7920 has…
view full answer...The size brake assembly you mentioned of 12-1/4 inch by 3-1/8 inch is not a standard size for a 10k Lippert axle but it's pretty close to standard sizes in width. The diameter of 12-1/4 inch is fine but the widths typically are 3-1/2 inch or…
view full answer...Related Searches
Filter Your Search
Contact and Help