Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The model number for fans such as the MaxxAir MaxxFan Mini Roof Vent, #MA00-04401M is listed on the upper side of the assembly itself. Please see the attached image. You will best identify this by opening the vent and climbing on top of the RV.…
view full answer...The quick disconnect fittings are the same and is an industry standard. The difference between the Camco Quick-Connect Full Flow Plug for Low Pressure Propane Systems part #CAM59903 and the MB Sturgis Quick Disconnect Propane Adapter Fitting part…
view full answer...The Camco Propane Appliance Extension Hose - 1/4" Male NPT x 1/4" Female NPT - 5' Long #CAM59883 is the shortest hose we have with those fittings. We don't have a 2 foot or 3 foot option like you are seeking, but these hoses can be…
view full answer...Due to the orientation of the vent on the regulator part #CAM59005 it is a vertical regulator. For a similar horizontal regulator what you would need is the part #108221 which is a similar 2 stage regulator but is instead designed for the horizontal…
view full answer...I spoke to my contact at Camco and he informed me that the Camco RV Power Defender Voltage Analyzer #CAM55310 that you referenced offers 1,050 joules of surge protection but it's primary function is to determine if a power outlet/pedestal is…
view full answer...Yes, the MB Sturgis Quick Disconnect Propane Hose #100476-120-MBS has a threaded male Disposable Cylinder connector on one end (see photo please) that will mate with the female Disposable Cylinder connector on the adapter shown in your photo. The…
view full answer...The vent on a regulator should always be facing down to allow gravity to properly vent the regulator. If your system has your pipes running horizontally then you would want the MB Sturgis Horizontal 2-Stage Propane Regulator - 11" Water Column…
view full answer...Yes, you should go with a dual stage like the MB Sturgis 2-Stage Propane Regulator part #108220 for vertical or part #108221 for horizontal because it can be adjusted to a 12" water column outlet. In order to do this you will need to remove the…
view full answer...Hey Garvin, The flush ball unfortunately isn't offered separately so it's not a replaceable part. Is water leaking from the bowl through the seal down the drain? When you replaced the seal on your Dometic 310 series RV toilet did you use part…
view full answer...The Curt #13703 would work fine for you. To install a 4-pole connector at the rear of your 5th wheel, the easiest option would be to tap a 4 pole vehicle end harness like #18002 into the taillight circuits of the fifth wheel. I do have a caveat or…
view full answer...The best chock/leveling system we have for your motorhome with a dually axle is the Andersen Camper Wheel Chock and Leveler part #AM3604. This system can be used on trailers/vehicles up to 30,000 lbs with wheels up to 32" diameter. They are made…
view full answer...There is an easier solution that a different jack. You can use a longer ball mount so that the trailer, and the jack, will be further away allowing you to lower the tail gate without hitting the jack. Then you could use any jack you wanted. If that…
view full answer...Related Searches
Filter Your Search
Contact and Help