You may not tow a lot, but if you hit a crosswind, your trailer will sway. Get some control back with this low-cost solution. The telescoping sway bar lets you set just the right amount of resistance. Head unit comes with a pre-torqued hitch ball. necessary hardware Specs: Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems Tongue weight: 800 lbs - 1,000 lbs Maximum gross towing weight: 10,000 lbs Ball size
The Continuum is so quiet, you just might forget you have it. No more snapping bars up onto noisy brackets. Easy to install, distributes weight with precision, controls sway, and is adjustable on-the-fly. 2-5/16" Ball and 2" shank included. 6" Compatible with tow vehicles with or without an auto-levelingsystem Ball size: 2-5/16" Maximum drop: 1-1/8" Maximum rise: 9-3/8" Shank length: 6-3/8" From center of hitch pin
Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing. factory suspension. This is the primary difference between StableLoads and many air bag overload systems. With air bag suspension enhancement, the load in your truck is being taken on by the air bags. Air
Fight back against winding roads and strong wind gusts that cause your trailer to get squirrelly. This system evenly spreads out your tongue weight for a smoother ride. Included deep-drop shank is ... for use with weight distribution systems Works with traditional and underslung couplers Tongue weight range: 600 lbs - 1,150 lbs Gross towing weight: 11,500 lbs Total height adjustment along shank
This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and ... 1-1/4" diameter shank Specs: Tongue weight: 500 lbs - 600 lbs Maximum gross towing weight: 6,000 lbs Application: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll ... weight-carrying capacity Designed to work with a suspension system that is in good working order Limited lifetime warranty - satisfaction guarantee Whether you're hauling heavy loads in your bed or cargo area
If the hub bore is 1.5 inches like you mentioned (the area of the hub where the cap installs) then we don't have a Bearing Buddy that will fit. If the measurement was more like 1.75 inch then the #BB1781 would most likely fit as it measures 1.78…
I did some research and found that the 2,600 lb Hub, #22834, takes the #1779 outer bearing and #2788 inner bearing and would use the #29031 grease seal. This hub has a 6 bolt on 5-1/2 inch bolt pattern. This sounds like the hub you have, and…
When it comes to finding the correct replacement hub for your trailer axle, we first would need to know what the current inner and outer bearing number is on your axle. There should be a stamped number on both the inner and the outer bearing. If you…
According to our friends at Redneck Trailer Supply, the reel on the end of the Enclosed Trailer Ramp Spring, #ERS120D81 measures 5 inches in diameter, so you would need a bit more than 5 inches of room on the header above the rear door of your…
Dexter Nev-R-Lube Bearings such as the 50MM #31-71-3 referenced in your question do not have a specific maintenance or replacement schedule. These are pre-lubricated at the factory, which will make it resistant to contamination, and sealed for life…
The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
For RV's that have laminated siding with decent density, there frequently is no backing installed. Awnings such as the Solera Smart Arm 12V Power RV Awning, #LC517517 are screwed into the siding using self-taping screws. Other times the awnings…
If you are looking for a universal replacement fabric for your RV's awning, you will want to measure from the outside flange to the outside flange on the slide-out that you want the fabric to fit. You will need to select the fabric size that…
The ramp hinges part #PLR1902 don't have a specific weight rating, but I can tell you that by the sheer size of these things and their steel constructions that three of them would be just fine for a 4,000 lb rated ramp.
For a 2009 Ford F-150 2WD the correct RoadActive Suspension Custom Leaf Spring Enhancement Kit is item #RAS3611. This system converts your Ford F-150's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level…
Weight distribution hitches like the Fastway e2 #FA94-00-1061 are weight sensitive. You do not want to use one rated lower or higher than the actual tongue weight of the setup. An under-rated system will not be able to do its job of shifting trailer…
A properly loaded trailer should have a tongue weight (TW) that is 10-15% of the weight of the trailer. If your trailer weighs in at 10,965 lbs then your ideal TW range is 1,096 lbs - 1,645 lbs. You can use a commercial scale or rig something up with…
This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and ... systems Shank length: 12" Maximum rise: 6" Maximum drop: 2-1/2" 1-Year limited warranty Included w/ System Required - Sold Separately Optional Add-Ons Adjustable Shank System Head Lift
Fight back against winding roads and strong wind gusts that cause your trailer to get squirrelly. This system evenly spreads out your tongue weight for a smoother ride. Adjustable shank and ... , hitch ball, spring bars, sway control brackets, lift handle, pin and clip, and all necessary hardware Specs: Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll ... vehicle's weight-carrying capacity Designed to work with a suspension system that is in good working order Limited lifetime warranty - satisfaction guaranteed Whether you're hauling heavy loads in your
Put the power of your system in the palm of your hand. Adjust any brand of air springs (sold separately) from inside or outside of your cab and run diagnostics with the hand-held controller or your ... Features: Lets you adjust 2 air springs (sold separately) independently with the wireless remote control Level your vehicle front to back Get side-to-side leveling of off-center loads by inflating
The Equal-i-zer has a reputation as strong as its American-made steel. We love this hitch's solid build quality and that it helps to proactively stop trailer sway instead of just dampening it after it starts. Ball and shank included.; trailer hitch receivers rated for use with weight distribution systems Tongue weight: 200 lbs - 600 lbs Gross towing weight: 6,000 lbs Ball size: 2" Sway control bracket positioning: 27" - 32"
7,500-lb Capacity. 7" Diameter LoadLifter 7500 XL Ultimate air springs upgrade your rear suspension with full-time load support. They level your vehicle, improve braking and ride comfort, and ... Features: Provides your vehicle with up to 7,500 lbs of load-leveling support, reducing strain on your rear suspension and improving both safety and ride quality 7" Diameter springs have more
Built-in sway control keeps your trailer in line by using specific tension points and steel-on-steel resistance. System head tilt adjustment feature eliminates the need for washers. 2-5/16" Ball ... necessary hardware Specs: Tongue weight: 800 lbs - 1,000 lbs Maximum gross towing weight: 10,000 lbs Application: 2" x 2" trailer hitch receivers rated for use with weight distribution systems Sway
The Equal-i-zer has a reputation as strong as its American-made steel. We love this hitch's solid build quality and that it helps to proactively stop trailer sway instead of just dampening it after it starts. Ball and shank included.; trailer hitch receivers rated for use with weight distribution systems Tongue weight: 800 lbs - 1,200 lbs Gross towing weight: 12,000 lbs Ball size: 2-5/16" Lift-bracket positioning: 27" - 32"
... loads on your rear suspension. Adjusts progressively to the weight of your load - the more you load onto your vehicle, the stiffer they become Reduces body roll and helps level your truck Withstands extreme temperatures Durable springs
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also ... on bumper for easy access Compressor system with in-cab gauges (sold separately) can be added to monitor and automatically adjust air pressure Made in the USA Specs: Load-leveling capacity: up to 5,000
Of all the hitches we tested, this is our favorite. It fixes sway, creates superb handling, and levels your ride - silently. Rotating chain-style, clamp-on brackets make setup easy. Max 2" drop ... with weight distribution systems Tongue weight: 150 lbs - 350 lbs Gross towing weight: 3,500 lbs Lift bracket positioning: mount about 29" back from center of coupler Maximum trailer frame height
Of all the hitches we tested, this is our favorite. It fixes sway, creates superb handling, and levels your ride - silently. Rotating chain-style, clamp-on brackets make setup easy. Max 2" drop ... favorite weight distribution systems. Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced. If you still have a hard
This weight-distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Shank and pre-attached, pre-torqued ... release 2 spring locking pins Trunnion spring bars are constructed of solid, forged steel for strength and durability Bars are shorter than those in standard systems to accommodate your short-tongue trailer
Get the most out of your TorkLift SuperHitch Magnum dual-receiver trailer hitch with this heavy-duty weight distribution system. Adjustable collar-style chain brackets and hydraulic assist make setup ... Frame-Mounted Obstacles Most weight distribution systems don't give you much latitude in where you install the brackets. Typically, the length of the spring bars - and the fact that the chains are bolted to
You may not tow a lot, but if you hit a crosswind, your trailer will sway. Get some control back with this low-cost solution. The telescoping sway bar lets you set just the right amount of resistance. Head unit comes with a pre-torqued hitch ball. necessary hardware Specs: Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems Tongue weight: 1,000 lbs - 1,400 lbs Maximum gross towing weight: 14,000 lbs Ball size
Fight back against winding roads and strong wind gusts that cause your trailer to get squirrelly. This system evenly spreads out your tongue weight for a smoother ride. Hitch ball sold separately. distribution systems Tongue weight: 800 lbs - 1,200 lbs Gross towing weight: 12,000 lbs Sway control bracket positioning: 27" - 30" back from center of coupler Maximum trailer frame height: 6"
Fight back against winding roads and strong wind gusts that cause your trailer to get squirrelly. This system evenly spreads out your tongue weight for a smoother ride. Included deep-drop shank is ... for use with weight distribution systems Works with traditional and underslung couplers Tongue weight range: 400 lbs - 800 lbs Gross towing weight: 8,000 lbs Total height adjustment along shank
Replaces 1 lead leg assembly for your Lippert Level Up hydraulic RV levelingsystem. Works with gen 2 models manufactured after 2023. Hydraulic jack has a 20" travel and includes a 9" ... Features: Replaces 1 lead leg assembly for your Lippert Level Up hydraulic RV levelingsystem Works with gen 2 models manufactured after 2023 Has 6 mounting holes for ease of installation Specs
Filter Results
