20-1/2" Long x 1" tall. Waterproof trailerlight serves 3 functions: brake, tail, turn. Low-profile Thinline light fits in tight spaces. Surface mount on 19-5/8" centers - hardware not ... Features: Trailer tail light serves 3 functions Stop light Tail light Turn signal light Sonically sealed, waterproof housing and lens unit is submersible Thinline Series has a low profile so that
12-5/8" Long x 1" tall. Waterproof trailerlight serves 3 functions: brake, tail, turn. Low-profile Thinline light fits in tight spaces. Surface mount on 11-3/4" centers - hardware not ... Features: Trailer tail light serves 3 functions Stop light Tail light Turn signal light Sonically sealed, waterproof housing and lens unit is submersible Thinline Series has a low profile so that
15-1/4" x 1-1/4" x 1/2". Waterproof, LEDtrailerlight with 13 diodes provides stop, turn, tail, and rear reflex functions. Premium LEDs last up to 100,000 hours. Durable polycarbonate ... submersible LEDs make great replacements for incandescent lights Rated for up to 100,000 hours of operation More efficient - provide better light with less power output No bulbs to replace - no brittle
13-1/4" x 2-1/8" x 1-7/16". Waterproof LED tail light functions as a stop, turn, and tail signal on trailers over 80" wide. Durable polycarbonate lens and housing. Surface mount - ... ): 12-7/8" Diodes: 11 Power draw at 12.8V Stop/turn: 0.275 amps Tail: 0.022 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal
20-1/2" x 1". 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface - hardware not included. 4-Wire pigtail ... trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows
17" x 1-3/8" x 1". Waterproof LED combination trailer tail light acts as a brake, tail, and turn signal when properly mounted. Durable polycarbonate housing and lens. Surface mount - ... Features: Low-profile LEDtrailerlight serves 3 functions: Stop Turn Tail Sonically sealed, polycarbonate housing and lens are waterproof Durable surface-mount technolgy (SMT) construction of LED
The reverse light pin on a traditional 7-way trailer connector, like part #PK11893 or a factory connector if that's what you have on your 2018 Ram, is the center pin. Take a look at the picture I attached that shows all the pin functions. To add…
The main issue when switching from a 5.30-12 tire to the Karrier ST175/80R13 Radial Trailer Tire w/ 13" White Mini Mod Wheel - 5 on 4-1/2 - Load Range D #AM31991 is going to be clearance. It looks like you have a fender on the Harbor Freight…
We do indeed carry Optronics products. The number you provided is a DOT reference number, and does not denote the part number of the lamp or the lens. However we had a picture sent in once from a guy of the housing of the light he needed a lens for…
I have a solution for you. We do not carry a tool that small, however the solution is going to be easy. If you are trying to clean dirt and muck out of a 7pin or 4 pin connection you can use some pipe cleaners and some carb cleaner spray. Tooth picks…
Electric brakes have 2 wires located at the back. One is for power and the other is for ground (it doesn't matter which is used for which function). The ground wires should be connected to the trailer frame. The only other place that would carry…
I believe you almost solved the problem when you swapped the wiring, but in reality you needed to use 10 gauge wire like part #10-1-1 (sold by the foot). You are experiencing a voltage drop due to the long distance of wire that's not thick…
Yes, 14 gauge wire seems too small. I would go with 10 or 12 gauge. For 10 gauge you can use #10-1-1 and for 12 gauge use #12-1-1. These wires are sold in increments of 1 foot. So if you needed 20 feet of wire you would enter 20 in the quantity box.…
Thanks for reaching out, and I'm glad you were able to determine fitment of the 7K etrailer Drop Axle #e85SR for your car hauler trailer! The wiring you need to connect all of your electric brakes up to your trailer is 10 gauge wire which we sell…
Tekonsha uses 10 & 12 gauge wire on their brake controllers. They use 10-gauge for the 12V and output and-12 gauge for the red and white.. We do not have replacement female-end connectors. We do offer the replacement male connectors for Tekonsha…
To answer your first question, it is possible to splice the brake controller's 12 volt power wire into the 12 volt power wire you have attached to the vehicle's battery to charge the trailer's battery but this is certainly not recommend.…
To wire your electric brakes you will want to run 10 gauge wire #10-1-1 to one of the brakes and run it to the other brake, using butt connectors like #05732-2 to connect them. The grounds will not be spliced, each brake assembly should have its own…
There is a good way for you to further stabilize your travel trailer and reduce sway. And since you already use a weight distribution hitch, and your Ram has Timbrens, the best option is going to be adding helper springs to your trailer. First,…
17" Long x 1-3/8" tall x 1" deep. Waterproof identification lightbar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer ... Features: LEDTrailerlight functions as an identification lightbar for trailers wider than 80" Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements
16" x 1-5/16" x 11/16". Low-profile LEDtrailer tail light serves as a stop, turn, and tail light for trailers over 80" wide. Surface mount - hardware not included. 3-Wire design.Features: Low-profile trailer tail light serves 3 functions on trailers over 80" wide Stop Turn Tail Sonically sealed, waterproof housing and lens unit is submersible LEDs make great
7-9/16" x 3-5/16" Oval. 3-Function, waterproof LEDlight acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not ... Tail: 0.046 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat
16-1/2" Long x 1-3/8" tall. Waterproof identification lightbar with 3 lights is designed for trailers wider than 80" Durable stainless steel base. Surface mount to trailer - hardware ... Features: LEDtrailerlight functions as an identification bar for trailers wider than 80" 3 Optronics AL91 series lights are replaceable (AL91RB - sold separately) Sonically sealed, waterproof
20-1/2" x 1". 4-Function, waterproof lightbar acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface - hardware not included. 4-Wire pigtail ... trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows
15-1/4" x 1-1/4" x 1/2". Waterproof, LEDtrailerlight with 13 diodes provides stop, tail, and turn functions. Premium LEDs last up to 100,000 hours. Durable polycarbonate base ... Features: Trailer tail light provides stop, turn, and tail light functions Sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Rated for up to
15" x 1-3/8". Low-profile LED tail light serves 3 functions on trailers over 80" wide. Durable polycarbonate housing and lens. Surface mount - hardware not included. 3-Wire design.Features: LED tail light serves 3 functions for trailers more than 80" wide Stop, turn and tail light Thinline Series has a low profile so that light can fit in tight spaces Sonically sealed
15" Long x 1-3/8" tall x 5/8" deep. Waterproof identification lightbar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer ... Features: Low-profile LEDtrailerlight functions as an identification lightbar for trailers wider than 80" Ultrathin design allows for installation in tight spaces Sonically sealed, waterproof
15" x 1-3/8". Low-profile LED tail light serves 3 funtions on trailers over 80" wide. Durable polycarbonate housing and lens. Surface mount - hardware not included. 3-Wire design.Features: LED tail light serves 3 functions on trailers more than 80" wide Stop, turn and tail light Thinline Series has a low-profile so that light can fit in tight spaces Sonically sealed
17" x 1-1/2" x 1-9/16". This LEDlightbar serves as a rear clearance identification light on trailers. Surface mount - hardware not included. P2 rated.Features: TrailerLEDlightbar serves as a rear clearance identification light 3 Rectangular LED red lightsLEDs make great replacements for incandescent lights Last 50 times longer More efficient -
This waterproof identification lightbar with 3 lights is 15-15/16" long and designed for trailers wider than 80". Durable polycarbonate housing and lens. Surface mounts to trailer - ... Features: LEDtrailerlight functions as an identification lightbar for trailers wider than 80" 3 Optronics AL91 series lights are replaceable (AL91RB - sold separately) Sonically sealed
17" x 1-3/8" x 1". Waterproof, 3-function trailerlight serves as a stop, turn, and tail signal light when properly mounted. Durable polycarbonate housing and lens. Surface mount - ... Features: Low-profile trailerlight serves 3 functions Turn signal light Tail light Brake light Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mounted technology
14-1/4" Long x 1-3/16" tall x 1-5/16 deep. Waterproof identification lightbar with 3 replaceable red 3-LEDlights is designed for trailers wider than 80". Polycarbonate lens and ... Features: Trailerlight functions as an identification lightbar for trailers wider than 80" 3 Optronics MCL series lights are replaceable (MCL95RB - sold separately) Sonically sealed
Haul your large boat trailer safely, with this 12-15/16" x 2", submersible, V-shaped identification light. When attached to the back of your trailer, this red light indicates to other ... Features: LED identification light improves road safety by alerting other drivers that your trailer is over 80" wide V-shaped light is designed to fit your boat trailer's rear, V-bend cross
15" Long x 1-3/8" tall x 5/8" thick. Waterproof identification lightbar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer ... Features: Low-profile LEDtrailerlight functions as an identification lightbar for trailers wider than 80" Ultrathin design allows for installation in tight spaces Sonically sealed, waterproof
16-1/4" Long x 1-1/4" tall x 1" deep. Identification lightbar is designed for trailers wider than 80". Mounts to surface of trailer - hardware not included. 2-Wire pigtail.Features: LEDTrailerlight functions as an identification lightbar for trailers wider than 80" Epoxy sealed, housing eliminates weld joints LEDs make great replacements for incandescent lights
14-1/4" x 1-3/16" x 1-1/16". Waterproof identification lightbar with 3-LEDlights is designed for trailers wider than 80". Durable stainless steel base. Surface mount - hardware ... Features: LEDtrailerlight functions as an identification lightbar for trailers wider than 80" Sealed, waterproof housing and lens units is submersible LEDs make great replacements for
17" Long x 1-3/8" tall x 1" deep. Waterproof identification lightbar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer ... Features: LEDTrailerlight functions as an identification lightbar for trailers wider than 80" Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Filter Results
