Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Yes, the Dexter Self-Contained Hydraulic Jack #DX72CR does come with a manual hand pump that can be used as a backup in the event of hydraulic malfunction.
view full answer...Hey Cheryl, Yes, the Self-Contained Hydraulic Jack #e33VV could be bolted the frame of your horse trailer to upgrade you to a motorized jack. This jack has a 12,000lb capacity so you'll want to verify what your pin weight is to ensure it falls…
view full answer...Bulldog Square Jack - Drop Leg w/ Non-Spring Return - Sidewind - 12-1/2" Lift - 10,000 lbs #BD182400 has a 1 inch shaft diameter. This jack will work well for your 4 horse gooseneck trailer and is also able to use the Bulldog Powered-Drive Kit…
view full answer...In order to equip your horse trailer with a powered jack, I would start off by determining if you can add a powered kit to your current landing gear. These kits, like the Bulldog Powered-Drive Kit, #BD1824200100, are brand and model/capacity specific…
view full answer...So the Dometic KX2040-81 is a ceiling garnish and does not actually specify which roof vent you have. To find the tag with the fan information you will need to get the number off the roof side of the fan under the lid. Another option is the Universal…
view full answer...The best option I have for you would be to replace all the latches on the trailer or change out the lock cores. It looks like you have some of the common latches such as the Global Link Vise Lock part #295-000024, the Global Link RV Baggage Door Slam…
view full answer...In order to charge an on-board trailer battery you'd need to have a seven way connection on both the vehicle and trailer, this would contain the necessary circuits to pass a charge from the vehicle battery to the trailer battery. If you don't…
view full answer...When the Single Rocker Switch #37213575 arrives you should just be able to remove the middle section. Sometimes the middle portion will shift and secure itself into place on the tabs that hold the switch in place. If this happens, you will just need…
view full answer...Yes you want to ground the 12v battery to a clean bare metal surface on the trailer frame when using a spare battery to power an interior light. You want to make sure the battery is good and all of your spliced connections are connected properly.…
view full answer...Trailer wiring generally uses 16 gauge wire, part #16-1-1. However, with a long trailer like yours you may want to go with a larger like 14 gauge #DW07550-1 or even 12 gauge #12-1-1. Each size is sold by the foot. You will need to have the lights at…
view full answer...The Double RV Switch Faceplate #37212885 has a 1.125" tall by 0.55" wide cutout. This will allow you to use any of the following switches below. Single 12V Rocker Switch - On/Off - SPST - Black #37213405 Single Rocker Switch - Labeled…
view full answer...The color of the light that the Low Profile LED Flood Light part #OPT64FR puts out is a bluish white which is very common for LEDs. For a warmer light that would work great the Omega LED RV Porch Light part #328-007-30SCPE which puts out a warmer…
view full answer...Filter Your Search
Contact and Help