; 1-1/4" shank is solid 2" shank is hollow Maximum tongue weight: 300 lbs Made in the USA Note: Tongue weight capacity of hitch will be reduced by 50% with use of adapter
Adapts your 1-1/4" hitch receiver for use with 2" accessories. Gain extra ground clearance with 5" rise or 4-1/4" drop. Hitch pin and clip or hitch lock sold separately.Features: Adapter converts your 1-1/4" trailer hitch receiver into a 2" receiver so that you can mount a bike rack, cargo carrier, or other 2" hitch accessory Built-in rise provides
Insert this heavy-duty drop hitch receiver adapter into your 2" hitch to get up to an 8" rise or drop for high or low ground clearance.Features: Drop hitch receiver adapter provides a rise or drop to match the height of your application Shank slides into hitch receiver Built-in anti-rattle bolts reduce vibration and noise Heavy-duty
Insert this heavy-duty drop hitch receiver adapter into your 2" hitch to get up to an 4" rise or drop for high or low ground clearance.Features: Drop hitch receiver adapter provides a rise or drop to match the height of your application Shank slides into hitch receiver Adjustable height allows your tow bar to be level when towing
Add a bike carrier or cargo carrier with the dual hitch receiver.Features: Allows you to use a hitch-mounted bike rack or cargo carrier while towing your vehicle Constructed of sturdy steel Resists rust and corrosion with durable powder coat finish Requires pin
As far as the Curt hitch #C22UR and the Draw-Tite #DT55MR, we unfortunately haven't had a chance to install the hitches yet. With that being said, we do not have the precise ground measurements when fitted onto a 2021 Toyota Sienna. However, both…
There is one key difference between the Blue Ox Patriot 2 Portable Braking System part BRK2016 and the Blue Ox Patriot 3 Portable Braking System part #BLU37TR. The difference is an extra safety measure built into the Patriot. The Patriot #BLU37TR has…
There are a few troubleshooting steps to help you figure out why you have no power. I would start by making sure that there is not any corrosion or debris blocking your connection points. If they are clean or still no power after cleaning, I would…
You will not be able to use the SuperSprings #SS35ZR with the Firestone #F56ZR on your 2021 Nexus Rebel 30R motorhome as they both mount in the same location on the leaf springs. If you are wanting to use multiple systems you can combine the…
The 7-Way RV Upgrade Kit for Trailer Brake Controller Installation part #ETBC7L can be mounted with the Curt No-Drill Bracket for 6-Way or 7-Way Round Trailer Connector Mounting Bracket part #C57202.
It would really depend on the mechanical experience of the installer that is installing the Stay-IN-Play Supplemental Braking System part #SM99251. It usually takes our experienced installers 8 hours to install so it is recommended to take it to a…
The AutoStop braking systems can be used on several vehicles as long as they are using the correct corresponding tow bar. That being said, our installers here are not big fans of the AutoStops at all. I can't recommend them for you as I don't…
The Curt High-Low Adapter #C59KR is designed for flat towing only. Curt doesn't even test it for accessories to give it a tongue weight rating. The Roadmaster #RM-048-4 is the most comparable with a distance of 9-5/8" from hitch pin to hitch…
To use the Brophy Aluminum Scissor Steps, #AS24 on the camper you have in the bed of your 2015 Ford F150 you are going to need to remove the tailgate if you plan on connecting the steps to your camper because it would not be able to connect to your…
Generally speaking, trailer brakes and a brake controller are recommended when the gross trailer weight (loaded and ready for a trip) is greater than 1/2 of the tow vehicle's weight, or over 2,500 pounds. You mentioned that the Aliner Camper has…
I would be happy to recommend everything you will need to add a 7-way connector and trailer brake controller to your new 2021 Toyota Sienna. First you will need to have a 4-way connector installed of which I recommend the Curt Powered Tail Light…
For a Blue Ox compatible base plate kit that works with your 2023 Ford Bronco, you will need the Blue Ox Base Plate Kit item #BLU23XR. This kit is custom fit and comes with everything needed to install it on your Bronco. These attach in the same…
Carry accessories such as your bike rack or cargo carrier while also towing with this multipurpose ball mount. Receiver intended for accessories only. Do not exceed 750 lbs of total tongue weight while towing.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball 2" Square receiver
Add a bike carrier or cargo carrier with this dual hitch receiver.Features: Allows you to use a hitch-mounted bike rack or cargo carrier while towing your vehicle Constructed of sturdy steel Resists rust and corrosion with durable powder coat finish Requires pin
Hitch extender provides an additional 7" or 9" clearance for spare tires and tailgates so you can install a bike rack in your hitch. It also provides a 2-1/4" drop for trucks with ... capacity: 250 lbs Drop/rise: 2-1/4" Dimensions: 13-7/8" long x 4-1/2" tall x 2-1/2" wide Weight: 10 lbs Limited lifetime warranty Note: This adapter is designed to carry a bike rack only
Extend your trailer hitch receiver opening so that you can clear your spare tire when using your hitch-mounted bike rack or so that your trailer won't hit a rear-mounted propane tank when you ... Features: Extends trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles Get extra clearance for your trailer Mount your bike rack without having to remove your
Extend your trailer hitch receiver opening and get an extra receiver with the same piece. This dual hitch extension gives you (2) 2" receivers so you can tow a trailer and use an accessory at ... hitch-mounted accessories only Extends trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles Get extra clearance for your trailer Mount your bike rack without having to remove your
Achieve the proper height for your tow bar setup with this drop/rise hitchadapter. Provides either a 10" rise or a 10" drop to make up the height difference between your RV and towed ... only. Do not use to tow a trailer. Many tow systems require some sort of hitch accessory to either raise or lower your tow bar so that it sits level. To determine if your setup needs an adapter, hook the
Make up for the height difference between your RV and towed vehicle with this hitchadapter. Provides either a 2" drop or a 2" rise. Solid shank provides strength and durability.: 400 lbs Gross towing weight: 10,000 lbs Length: 14-5/8" overall 10" From center of hitch pin hole to center of hitch pin hole Limited Lifetime Warranty Note: This adapter is designed to flat
Achieve the proper height for your tow bar setup with this drop/rise hitchadapter. Provides either a 4" rise or a 4" drop to make up the height difference between your RV and towed vehicle ... hitch accessory to either raise or lower your tow bar so that it sits level. To determine if your setup needs an adapter, hook the tow bar up to your rv and towed car and measure to see how close to level
Make up for the height difference between your RV and towing system with RoadMaster's Hi-Low hitch receiver. Provides either an 4" drop or a 4" rise for high or low ground clearance.Features: Allows for proper positioning of tow bar Makes up for height difference between RV's hitch and towed vehicle's base plates Can be used in the rise or drop position Solid steel shank
Achieve the proper height for your tow bar setup with this drop/rise hitchadapter. Provides either a 6" rise or a 6" drop to make up the height difference between your RV and towed vehicle ... your tow bar so that it sits level. To determine if your setup needs an adapter, hook the tow bar up to your rv and towed car and measure to see how close to level it is. The "safe zone" for a
Keep your flat tow setup level with this hitchadapter. Gives you a 6" rise or drop, with a solid shank for strength and durability. You can also use it with bike racks, cargo carriers, and ... Features: Keeps tow bar level while flat towing Makes up the difference between the height of the RV's hitch and towed car's base plate Works with bike racks, cargo carriers, or other 2"
Make up for the height difference between your RV and towed vehicle with this hitchadapter. Provides either a 6" drop or a 6" rise. Hollow shank is lightweight. adapter is designed to flat tow a vehicle only. Do not use to tow a trailer. When using with a hitch-mounted accessory, such as a bike rack or cargo carrier, the tongue weight of your hitch will be reduced
The thick channel plates and welded gusset on this steel ball mount make it perfect for heavy-duty use. Tow up to 10K with the 2" ball or 14K with the 2-5/16" ball. Adjustable design lets you tow trailers of various heights.Features: 2-Ball mount lets you hook up your trailer to your tow vehicle Shank slides into 2" hitch receiver on vehicle Hitch ball provides connection point for trailer coupler Adjustable height
Keep your flat tow setup level with this hitchadapter. Gives you a 3" rise or drop, with a solid shank for strength and durability. You can also use it with bike racks, cargo carriers, and ... Features: Keeps tow bar level while flat towing Makes up the difference between the height of the RV's hitch and the towed car's base plate Works with bike racks, cargo carriers, or other
Corrosion-resistant ball mount is 11-5/8" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only. delivers smooth, clean surface Drawbar can be used in rise position only Hitch pin and clip or hitch lock sold separately Assembled in USA Specs: Application: 1-1/4" x 1-1/4" trailer hitch
Sturdy steel ball mount with a solid shank measures 7-1/4" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish is corrosion resistant.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Both
... 2" hitch receivers.Features: Ball mount with dual-ball platform lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Adjustable height
Make up for the height difference between your RV and towed vehicle with this hitchadapter. Provides either a 10-1/4" drop or a 10-1/4" rise. Solid shank provides strength and durability. Warranty Note: This adapter is designed to flat tow a vehicle only. Do not use to tow a trailer. When using with a hitch-mounted accessory, such as a bike rack or cargo carrier, the tongue weight of your
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Filter Results
