Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The Tru-Ryde Grease Seal #RG06-050 that you referenced is a direct replacement for National Seal part 473336. This is a grease seal. The original part number you provided, 472193, is an oil seal, according to my research. It is specified to have an…
view full answer...I can certainly point you in the right direction. For an electric bake assembly for your 2016 Keystone Cougar with a 4.4K axle I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit #K23-478-479. This comes with both a right and left hand…
view full answer...We do have the exact bearings, races, and grease seal you need for your 4,400 lb Dexter axle, and while there isn't a single kit with the parts, you can get them all individually. What you will need are the following: Bearings #L68149 and…
view full answer...Thank you for the photo of your trailer wheel and tire in size 7-14.5LT. For choosing the wheels you'll want to first confirm the hub bolt pattern; your photo shows what appears to be a wheel with 10 stud holes that is mounted on a 5-stud hub.…
view full answer...Hey Kevin, thanks for the photos! According to the specs on your trailer your axles will fit with 3,500 lb brake parts so I recommend replacing your brake parts with the DeeMaxx Disc Brake Kit #DE66YR. This kit is perfect for boat trailers because…
view full answer...The connections you will need to make to install your Voyager brake controller are listed below. If your Voyager has a connector attached to the wires at the back you can use the Pigtail Wiring Harness, #7894, to connect to the wires on the connector…
view full answer...Grease Seal #RG06-050 is the replacement part for the Dexter 010-019-00. It is 1.719 inches inner diameter and 2.565 inches outer diameter. It is a fit for 3500 lb axles. This is a confirmed replacement cross-reference.
view full answer...Hey Nicholas, thanks for reaching out! The rotors in the E-Coat Dexter Disc Brake Kit #K71-633-2 are being discontinued so even if we had everything else available separately in a different kit I'd recommend going with a different disc brake kit…
view full answer...Since there are no ways to really measure the flexibility of a hose, the best way I can think of is to show them to you for a comparison. If you check out the review videos that I linked for the MB Sturgis Propane Pigtail - Stainless Overbraid…
view full answer...I agree that you would be fine with either the MB Sturgis, #100473-15-MBS or the, #100575-12 based on your stated usage. I suggest selecting the maximum flow capacity of the #100575-12-MBS.
view full answer...Hey Perry, thanks for reaching out. We certainly should have the parts you need for an oil bath conversion, but I will need to collect a bit more info on your axle in order to be sure you get the right parts. First I will need to know the weight…
view full answer...The Dexter "8-256" is a hub assembly that uses an L68149 inner bearing and a L44649 outer bearing. This hub assembly was offered in a few different bolt patterns therefore you would need to confirm your bolt pattern using the attached help…
view full answer...Filter Your Search
Contact and Help