Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hi Danny, Evangeline asked if I could get you helped out as she is climbing around the roof of an RV at the moment and couldn't get to a computer, so here I am. Let's get into it. Since you have a 3,500 pound axle with Dexter's Vault…
view full answer...The Titan Zinc-Plated Brake Actuator w/ Electric Lockout #T47457207K requires 2 grade 5 bolts that are 1/2" x 4" to bolt to the trailer tongue.
view full answer...A 7,000 lb capacity actuator like the part #T47457207K would work great with your boat and trailer that weighs a total of 2,200 lbs. This is a multi-fit coupler that will work with virtually any hitch ball size.
view full answer...The Shelby Trailer Winch 5409B is a single speed brake hand winch with a 2,100 lb capacity. It was discontinued some time ago. In order to replace this winch I recommend using the Dutton-Lainson Hand Winch part #DL15721. The Dutton-Lainson winch has…
view full answer...I would easily recommend the Fulton F2 Fully Enclosed Trailer Winch with Adjustable Handle - 2,000 lbs #FW20000301 or the Fulton XLT 2-Speed Trailer Winch with Heavy Duty 20' Strap - Zinc - 2,600 lbs #F142418 as a replacement for your…
view full answer...I have a hub solution for you. Even though we do carry a hub that is compatible with you current 4.4k axle that uses an inner bearing #L68149 and an outer bearing #LM67048, we do only carry one that has the brake drums. That is the Trailer Hub and…
view full answer...I attached a picture that shows what type of lighting requirements are needed for a trailer over 80 inches in width as well as a link down below that covers this as well.
view full answer...The Timbren Axle-Less Trailer Suspension System with Hubs part #A12RS440 is a great option for help with improved ride quality. Unlike traditional leaf spring suspension systems, you'll get a smooth and stable ride regardless of load size due to…
view full answer...The Replacement Center Cap #CXF106B is currently our only black center cap which will fit the Aluminum Sendel Series T07 Black Machined Trailer Wheel #AM25DR. We do have the Americana Trailer Wheel Center Cap #AM90175 which you can scuff and paint…
view full answer...The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…
view full answer...You may be experiencing some wear in the suspension components that can cause tire wear and also be a symptom or cause the axle to be misaligned. Inspect your suspension components and if any of the holes where hardware goes is egg-shaped, that…
view full answer...While I cannot find the exact specifications for the hole pattern on the Fulton 142208 I was able to find dimensions for the Fulton High-Performance 2-Speed Trailer Winch #F142416. It is going to have the same bolt pattern as the Fulton Winch…
view full answer...Filter Your Search
Contact and Help