Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The CE Smith Carpeted Bunk Boards for Boat Trailers part #CE27820 are made with untreated lumber. If you want treated you can purchase your own boards and wrap them with the CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards part #CE11330.
view full answer...There are a couple factors that play a part in if you are able to swap your tires from 8 inches to 12 inch. If you're running an 8 inch wheel odds are that you have a single axle trailer so that shouldn't be an issue. If you have fenders on…
view full answer...The installation brackets that are recommended for the #CS19501 trailer fender are the #CE26065PGA. I have included a link for your reference. We also have several customer installation photos that show how the brackets attach to the fender and the…
view full answer...Ideally you want bunk boards that are at least 50% of the length of your boat, and want the to run from the stern and as far forward as you like. Since your boat is 16' Long you will want at least 8' of bunk boards, but I recommend going with…
view full answer...Having guide-on posts at the rear of the trailer is the best place for them. This allows you to know where the trailer starts as you approach it in your boat so that you can be as best positioned as possible. The 60 inch set part #CE27640 would be…
view full answer...You will want to install the CE Smith Post-Style Guide-Ons #CE27670 on the inside of the pontoons (see attached image). This will be just as effective when trying to load up the boat so putting posts on the outside, which will also add to the…
view full answer...The BoatBuckle Kwik-Lok Transom Tie-Down Straps part #IMF13110 are 24" long from the center of each connection so if that is how much space you have between the two tie-down points then they will work. However, a better option is the BoatBuckle…
view full answer...The Aluminum Viking Series Valhalla Trailer Wheel part #AX02350545BMFL will fit on your jet ski trailer as long as you have 5 bolts on your hub. You will want to match these up with Karrier ST175/80R13 Radial Trailer Tire part # AM10210. These are…
view full answer...I was unable to find information on the model EZ Loader Boat Trailer referenced in your question. I recommend checking the sidewalls of your existing tires to see what size is currently mounted. There should be a number listed, like what is on the…
view full answer...I have attached a chart for you to take a look at that includes the lug nut torque specifications. If your wheel uses 1/2 inch lug nuts or wheel bolts like the 12 Inch Steel Spoke Trailer Wheel #AM20124 referenced in your question, you will torque…
view full answer...It is not uncommon to have a leak at the swivel fitting on your Air Lift LoadLifter 5000 Air Springs #AL57338. It usually has to do with the hose not being cut cleanly. I've attached the portion of the installation instructions that deals…
view full answer...First I recommend trying to determine exactly where the air is leaking from on your Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88289 with Upgrade Kit #AL52301. The -4 AN Elbow Fitting #AL52RV could leak in one of 3 places. The AN/tapered…
view full answer...Related Searches
Filter Your Search
Contact and Help