Leaf-spring mounting kit includes 4-1/4" tall front hangers, 3-1/2" tall center hangers, 5-3/8" tall rear hangers, and necessary hardware. Equalizers are 11" long. Components for mounting axle to springs sold separately.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates to protect from road debris. Fits 13" to 15" wheels.
The automotive-grade pads on these brakes offer lasting effectiveness. Both 10" x 2-1/4" assemblies have rust-resistant, e-coated backing plates. Fits 14" to 15" wheels.
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5.2K and 6K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, cap and nuts included.
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
Driver's-side and passenger's-side hydraulic drum brakes feature a single-plunger design. Automotive-grade friction pads and e-coated backing plates are long-lasting. Fit 14-1/2", 15", 16", and 16-1/2" wheels.
Hi Matt; the only difference between the #AKHD-655-6-EZ-K and #AKHD-655-6-K is in fact the grease cap. The Easy Grease Trailer Hub and Drum Assembly comes with an additional cap that works with easy grease or E-Z lube axles. Everything else about it…
The correct set of replacement brake assemblies for your AxleTek 12 inch assemblies is the kit part #AKEBRK-7-SA that you referenced. This kit is a pair of left and right assemblies that are an exact match to what you have that are also self…
The biggest difference between Dexter brake assembly #23-459 and etrailer/AxleTek assembly #AKEBRK-7L-SA is the pad material. The Dexter assemblies use pads that are snapped off of a long strand of the material. The ones on the etrailer assemblies…
To verify if your 2021 Ford E-450 cutaway chassis for your Class C motorhome is pre-wired for a brake controller you will need to remove the storage slot in the top of your dash. I have included a install video below that shows how to remove the…
Hey Carson, from the part number you mentioned that would indicate you have a 7k axle so for a bearing kit that includes correct seal you would want the part #BK3-210.
From that number you supplied, it appears you have axles that are 5,200-lb to 6,000-lb with a 12" - 6 on 5-1/2 bolt pattern. For brake assemblies I recommend #AKEBRK-7R-SA for the right hand side and #AKEBRK-7L-SA for the left. This is a…
Many times Dexter hubs will fit on a Lippert axle, but Lippert does have a few axles out there with special spindle sizes. Every Lippert axle comes with a tag or plate on the axle that gives a serial number or NV number. If you can give me that…
Since time is a factor and we do not have the complete axle brake and hub set up, Item #8327816-EB, in stock (August 2021). I recommend the Dexter Trailer Axle with E-Z Lube Spindles item #8327816. This axle is 86-1/2" Long with a 5,200 lbs…
The exact replacement hub assemblies you need are the AxleTek Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 #AKHD-545-35-K. These assemblies come with the bearings, races, seal, grease cap and even the lug nuts…
Hello Jose, thanks for reaching out. What I recommend for your are the Dexter Electric Trailer Brakes #K23-086-087-00. These are the standard 10" x 2.25" brakes and they are parking brake compatible. The Dexter brakes use the same 4 bolt…
The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…
There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
Trailer axle measures 95" from hub-face-to-hub-face and 80" from spring-center-to-spring-center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. Easy Grease spindles for simple lubrication.
Marine-grade, free-backing hydraulic drum brakes won't engage in reverse, even if your actuator is activated. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates resist rust. Fit 14-1/2" to 16-1/2" wheels.
Driver's-side and passenger's-side hydraulic drum brakes feature a single-plunger design. Automotive-grade friction pads and e-coated backing plates are long-lasting. Fit 13", 14", and 15" wheels.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels.
The automotive-grade pads on these brakes offer lasting effectivenes. 12" x 2" Assemblies have rust-resistant, e-coated backing plates. Fits 14-1/2" to 16-1/2" wheels.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12-1/4" x 3-3/8" Assemblies have rust-resistant, e-coated backing plates and protective dust shields. Fits 15" or larger wheels.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12-1/4" x 3-3/8" Assemblies have rust-resistant, e-coated backing plates and dust shields to protect from debris. Fits 15" or larger wheels.
Marine-grade, free-backing hydraulic drum brakes won't engage in reverse, even if your actuator is activated. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates resist rust. Fit 14" to 15" wheels.
Hydraulic drum brakes offer more powerful, controlled, and smoother braking compared to electric brakes. 10" x 2-1/4" Assemblies have premium brake pads and e-coated backing plates. Fit 13" to 15" wheels.
Self-adjusting driver's-side and passenger's-side brakes are 12" x 2". Brake pads are made of durable friction material for improved braking and longevity. E-coated backing plates resist rust. Fit 14.5" to 16.5" wheels.
The automotive-grade pads on these brakes offer lasting effectiveness. Both 7" x 1-1/4" assemblies have rust-resistant, e-coated backing plates. Fits 10" to 13" wheels.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12-1/4" x 5" Assemblies have rust-resistant, e-coated backing plates and dust shields to protect from debris. Fits 15" or larger.
Marine-grade, free-backing hydraulic drum brakes won't engage in reverse, even if your actuator is activated. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates resist rust. Fit 14-1/2" to 16-1/2" wheels.
Hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Fits 13" to 15" wheels. axles with BTR spindles Compatible with standard axles from most manufacturers, including AxleTek, Dexter, Lippert (LCI), and AL-KO Wheel size: 13" to 15" Bolt pattern: 5 on 4-1/2" Wheel
Free-backing, driver's-side and passenger's-side drum brakes won't engage when you reverse, even if your actuator is activated. Automotive-grade friction pads and e-coated backing plates are long-lasting. Fit 14" to 15" wheels.
Dacromet backing plates fight rust and corrosion resistance. Ideal for boat trailers near saltwater. 10" x 2-1/4" Assemblies have premium brake pads. Fit 13" to 15" wheels.
Filter Results
