Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I did some checking and it appears that the gas strut #LC260282 is held to the support arms with bolts, pins, or rivets that go through the eyelets at each end, see picture. It does not appear that the strut unscrews from those eyelets. The…
view full answer...Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…
view full answer...The DeeMaxx item #DE86VR won't because of the spacing on the mounting bracket but I have a caliper that will. To replace your Tie Down Engineering 46304 caliper you will need the Kodiak Disc Brake Caliper item #KDBC225DAC.
view full answer...In order to find the correct disc brake kit for a trailer, the easiest way is to simply crawl under the trailer and read the capacity off the axle tag which is usually on a white sticker in the center of the beam. The Kodiak 12" Disc Brake Kit…
view full answer...You're absolutely correct! As long as your existing hydraulic coupler is for disc brakes, it'll work just fine with the Kodiak #K2R35D Disc Brake Kit you've purchased. If you click the provided link, you can see a video of the disc brake…
view full answer...I will start by saying that your TDE 11033L hub uses the #L68149 inner bearing and #L44649 outer bearing, which means you have a pretty standard #84 spindle on a 3,500 pound axle. With that said, we do not carry Tie Down Engendering products, so the…
view full answer...We've got the video you're looking for! The link to this video is present on the product page for the Solera 69" Standard Flat Awning Support Arm, Black #LC281154, but I've also linked it to this answer as well. Rob does a great job…
view full answer...Since you are pulling a trailer that weighs around 8,500 lbs. you would just want to stick with the Firestone Ride-Rite Air Helper Springs #F35FV (5,000 lb.). You really only need to spend more for the Firestone Ride-Rite Red Label Extreme Duty Air…
view full answer...Hey Eron, the equalizer part #K71-448-00 is 2 inches taller than the #K71-359-00 but since this only changes the height of half the leaf spring you'd end up only gaining 1 inch.
view full answer...When your current pitch arm is folded out and fully extended measure it's overall length. If it's 69 inch it would be the part #LC375994 for a replacement or if it's 63 inches #LC97UD.
view full answer...I attached a picture I got from Lippert that has their install instructions and diagnosis page for the #LC375994 that you referenced.
view full answer...Not quite, there is an additional screw below the wax screw in the end cap that also must be removed on the Solera Power Awning Idler Head #LC672052. From here you can remove the roll tube from the drive head. After the drive head is removed, there…
view full answer...Related Searches
Filter Your Search
Contact and Help