Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The appropriate torque spec for any application will vary depending on the construction of the wheel as well as on the stud size. I suggest checking the wheels you're using to see if their manufacturer has a suggested torque rating. Steel trailer…
view full answer...It looks like you recently purchased some Kodiak Wheel Bolts #K58WB316 and 5/8" flange nuts #95188 from us, so thank you for being a loyal customer! What you'll want to torque those to will depend on the construction of your wheels and the…
view full answer...Based on the images you sent in it appears your 2005 Starcraft RT10 does not use a traditional A-Frame coupler so the Lock N Roll #336TS504 will not work for your application. Instead you will need to measure the width between your frame rails the…
view full answer...According to Cruisemaster, the DO35 can be used with load distribution hitches (WDH) providing the coupling movement is not obstructed and the maximum downward load of 350kg is not exceeded. Looking at their instructions you will have to get an…
view full answer...On a Class I or II 1-1/4 inch trailer hitch you will need to use a 1/2 inch hitch lock such as #e98879. This lock has a 2 inch span which is the usable length of the pin. I have included a link to a video review for you. For a Class III or IV 2 inch…
view full answer...A standard trailer dolly like #RA20 is not directly compatible with the Lock N Roll hitch system. There is not a dolly designed to work with that system, however if you were to use a similar system with the ability to attach to a hitch ball, then a…
view full answer...For your 2013 Jeep Wrangler JK Unlimited I recommend the Hidden Hitch Ball Mount #80232. This ball mount has a length of 15-3/4"(400mm) from center of hitch pin hole to center of ball hole. That will give you an additional 3-15/16"(100mm)…
view full answer...For your 2019 Honda Passport I do recommend going with the Curt Echo Brake Controller #C51180. We honestly have not heard of any of the over-heating/electrical issues that you mentioned seeing and we do get a lot of customer feedback on this…
view full answer...I recommend installing the Air Lift 1000 Air Helper Springs #AL39PD on your 2024 Chevrolet Equinox. These will help to reduce sag by pushing into the gaps between the spring coils and raise the rear of your Equinox. The Air Lift WirelessONE…
view full answer...Timbren does make a 3,500 lb version of their axle less systems that has a 4 inch lift built into it. For that you'd want the part #ASR35HDS02. This is basically exactly what you listed wanting so this would be a great solution for you.
view full answer...The Lock N Roll Articulating Coupler #336TS504 dimensions for the A-frame are 2.19" at the narrowest part and 11.22" at the widest part of the opening. It is 9.68" long from largest opening to narrowest. I have included a picture below…
view full answer...For building an offroad trailer the part #ASR2KHDS02 would be an excellent place to start. The only other kit I would have you consider would be the #ASR35HDS02. This is setup for off-road tires, has a 3,500 lb capacity, will give the trailer a 4…
view full answer...Related Searches
Filter Your Search
Contact and Help