Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The Curt Cargo Carrier #C18113 will definitely work with the etrailer #e25TR on your 2024 Outback. Keep in mind, you will be limited to the 350 lb max tongue weight of the hitch or the max tongue weight of your vehicle. Whichever is lower is what you…
view full answer...I was able to find some dimensions of your Lance 825 Truck Camper, and since it is 16'3" and 8' tall I recommend the Adco SFS AquaShed Truck Camper Cover #290-12264 as it measures 17-3/4' long x 8-11/16' wide x 8-11/16' tall…
view full answer...I measured the distance of the hitch pin hole to the front of the Curt Cargo Carrier for 2" Hitches #C18113 and found it was 29 inches from the center of the hitch pin hole to the furthest part (the front) of the carrier, as you can see in the…
view full answer...The contents of a particular vehicle's factory towing package can vary greatly between models and manufacturers. For this reason, the best way to confirm whether or not your Hyundai Santa Fe is equipped with the tow package is to simply visit a…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Yes, since the mounting bracket for the TorkLift GlowStep Camper Scissor Steps #TLA7805 can be mounted under your door this will reduce the distance for that last step into your camper. I went out to the warehouse and found that the mounting bracket…
view full answer...Given the dimensions of your crossbar system, the CargoSmart Rooftop Cargo Bag - Waterproof - 15 cu ft #CS64FR is a great choice because it uses the length and width of your crossbars to its full dimensions. The CargoSmart Rooftop Bag is great…
view full answer...I do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which you…
view full answer...Here are parts lists for both of the kits that come in the 24x64 etrailer Cargo Carrier for RV Bumper #e83YR (see attached photos). The Mount-n-Lock SafetyStruts #MO22FR do come with our cargo carrier.
view full answer...Not every 2016 Hyundai Santa Fe Sport came with the factory towing package. If yours did (it would have a hitch at the rear of it from the factory) the Curt wiring harness part #C56332 would fit and work well. If you did not have the factory tow…
view full answer...While we do not have a custom fit receiver you may be able to use a Universal Receiver #C13701 on your 1978 Lincoln Continental Mark V. I have included an image with the dimensions of the receiver so you can compare it to the area on your rear frame…
view full answer...The recommended lug nut torque for your 7,000lb axle depends on a few factors like wheel size, stud size etc. Check out the attached photo which shows the torque specs for a variety of applications. I see you were looking at the Dexter Nev-R-Adjust…
view full answer...Related Searches
Filter Your Search
Contact and Help