The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates to protect from road debris. Fits 13" to 15" wheels.
Replaces the latch for your RV entry door that swings to the right as you're outside. Installs on the left-hand side of your RV entry door. Minimal assembly required. Easy to install, mounting hardware not included.
Bring your pet with you on your next adventure without worrying about them damaging or breaking through your screen door. Black powder coated aluminum screen fits and locks into existing channels on your screen door for added protection.
Window frame replaces 1 worn or damaged window frame on your RV's entry door. Additional UV protection molded into the plastic to stop yellowing. Includes pre-applied butyl sealant for both door and window seals. Glass sold separately.
Right-hand screen door latch replaces 1 worn or damaged door latch on Amerimax-style screen doors. Mounting holes measure 3" on center. Mounting screws are included.
Hey Ken, A 2015 Aliner Expedition should have a 3,500lb axle, which should have a 2-3/8" diameter axle tube. If this is true then you can use the Dexter Trailer Springs Over-Under Conversion Kit #K71-384-00 to raise the trailer height. This is…
For a torsion axle such as your Avan Aliner we have kits available that will give you some extra clearance. The Avan Aliner is a single axle trailer, so we have two kits that will work for you. Torsion axles must be side-mounted and not top mounted…
In order for your Sienna to activate the electric drum brakes on your trailer it will need to have a 7-way trailer socket. This connector carries lighting signals, 12V maintenance power for the trailer's battery (or power for it's lights) as…
Yes you have everything exactly right. Since you have a 4-way installed on your 2013 Toyota Sienna the correct kit to convert it to a 7-way and install the Curt Echo #C51180 would be the part #ETBC7L. We actually put together the kit part #ETBC7L…
We do offer a Replacement Damper for Ventline RV Range Hood w/ Horizontal Exhaust #BCA0472-00, which comes in a single piece and has overall dimensions of 9-7/16 inches long x 4-1/2 inches wide. This appears to match the dimensions you are needing…
We've got all of the parts you're going to need, so don't worry! To start, you'll need to install a 4 way connector, since it provides the base of what you'll need for the 7 way which is used on your Aliner travel trailer. For…
The Torflex Lift Kit part #K71-707-02 is correct for your 2020 Aluma 8216 Tilt Trailer as you have 3,500 Lb Dexter Torflex #10 Axles. This kit provides you with a 2-5/8" lift which is currently all that is available. The bolt holes on this lift…
Thank you for providing a photo of your Aliner's spare tire mount on its rear bumper. Any bike rack designed for use on the rear of a camper or trailer has to be specially built to withstand the forces encountered at the rear of such vehicles.…
Our selection of trailer tires in the 205/75-14 size with a D load range is limited to Kenda Karrie and Westlake. These both are considered higher quality radial options but the best one for your application will come down to your particular speed vs…
We have three options that may work for you. Americana Trailer Wheel Lug Nut - 7/8" Diameter - Stainless Steel - 1/2" - 20 #AM90070. Americana Trailer Wheel Lug Nut - 3/4" Diameter - Stainless Steel - 1/2" - 20 #AM26NR Americana…
There may be a solution for you but the Roadmaster dual receiver you mentioned is designed for flat towing only and should not be used for towing a camper. The only real option is the Malone 2" Dual Purpose Hitch Receiver #MPG544 which measures…
For carrying e-bikes at the rear of a camper the best solution will be to go with an e-bike rack that is approved for use at the rear of a camper like with the Hollywood Racks RV Rider part #HLY64FR which was designed for the rougher ride quality at…
Replaces 1 worn or damaged strike plate on your Bauer Products RV door lock (BP-7, BP-8D, BP-8RV, or NE Series). Zinc-plated steel construction resists corrosion.
Replace a worn or damaged window frame on the exterior of your RV's entry door. Helps protect your RV's interior from the elements. Mounting screws, interior frame, and glass all sold separately.
Replace broken or worn-out weather stripping around your doors and hatches on your RV before water damage creates a costly headache. Peel-and-stick adhesive is pre-applied for an easy DIY installation.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels.
Specially designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank (RVLG-HDL) and motor (LC142178) sold separately. Retracted height is 32-3/4". Extended height is 53-1/4".
Having two motors gives you more leveling control when setting up camp on uneven ground. 74" Bracket height when extended. 3 Universal mount weld stops let you choose how to orient the new legs. Total lift includes 17" of drop leg travel.
Keep your RV's interior off-limits with a new entry door lock. It replaces your original Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door lock. The lock can be keyed alike to match other Global Link locks.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K. operation. Large, rectangular, pivoting footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground. This system and its parts
Use this electric tongue jack to lift your trailer with the flip of a switch. The steel jack has 19" of travel and a 5" drop leg for extra lift. Extends 6" in 32.2 seconds with 1,000 lbs of tongue weight. allows for greater adjustability Rust-resistant powder coated steel parts are strong and durable Housing is made of vacuum-formed plastic for protection from the elements Black cover is painted to resist
Keep your RV's interior off-limits with a new entry door lock. It replaces your original Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door lock. The lock can be keyed alike to match other Global Link locks.
Bullet screen door latch allows you to secure your RV screen door to the entry door by replacing 1 worn or damaged screen door latch. Includes mounting screws and instructions.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K., rectangular, pivoting footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground. This system and its parts were designed to be
Right-hand screen door latch replaces 1 worn or damaged door latch on Philips-style screen doors. Mounting holes measure 2-5/16" on center. Mounting screws included.
JR Products gas shock replaces 1 worn or damaged shock on your RV entry door or storage doors. Durable black-nitride finished gas shock measures 11.41" compressed, 20" extended, and has 20 lbs of force.
Replace your damaged or missing strike plate with this new one. This strike plate is a direct replacement for the one that came with your Global Link RV entry door latch kit, and it also works with most other RV entry doors and latches.
Replaces the latch for your RV entry door that swings to the left as you're outside your RV. Installs on the right-hand side of your RV entry door. Minimal assembly required. Easy to install, mounting hardware not included.
Replaces or upgrades 1 entry door hinge on your RV. Controlled Motion technology holds the door open in any position instead of allowing the door to swing freely. 6-Leaf design. White color.
Filter Results
