Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The Curt #C59236 wiring you've found for your 2024 Mazda CX-90 is a universal wiring kit that essentially fits any vehicle on the market since it requires splicing into the OEM wiring of the vehicle for the installation. The Curt 56494, which is…
view full answer...If you are referring to the 12 volt pin that is located in the 1 o'clock position on the 7-way trailer connector then there should be 12 volt power feeding from the vehicle to the trailer on that pin. This means that if you test the 12 volt wire…
view full answer...The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…
view full answer...The Miro-Flex part #MCL63AB and the Thin Line part #MCL75AB are both very similar. They essentially are just visual differences for the lens. The Miro Flex has more of a Euro style look where you can see the diodes and the reflective base in the…
view full answer...The closest trailer axle we have to the measurements you provided is the Dexter Trailer Axle Beam with E-Z Lube Spindles part #7359765. This axle has a 3,500 lb capacity with a 95" hub face to hub face and 80" spring center to spring center…
view full answer...The Steel Trailer Wheel - 8" x 7" Rim - 4 on 4 - Galvanized Finish #AM20023 has the same wheel dimensions as the #AM3H300. These wheels do not have a valve stem on both sides, but only on the outside. They have zero offset, so the mounting…
view full answer...We actually have two wheel and tire combo that match the size and galvanized wheel you have referenced. The Kenda 5.70-8 Bias Trailer Tire with 8 Inch Galvanized Wheel - 4 on 4 - Load Range B, #AM30090, and the Kenda 5.70-8 Bias Trailer Tire with…
view full answer...Yes, as long as your existing hub uses the #L68149 inner bearing and the included grease seal matches the dimensions on your current unit (1.875 inch inner diameter and 2.360 inch outer diameter) the Spindle Grease Seal Set #BB60010 will work great…
view full answer...We have just what you need. For the two 5' bunk boards I recommend the CE Smith Carpeted Bunk Boards for Boat Trailers - 5' Long - 1 Pair #CE27820, but the longest board we offer is 7' so for the two 109" boards you will need to get…
view full answer...Yes. I don't see any reason why you couldn't use Pre-Drilled Round Rubber Trailer Bumper #D4-96 on your trailer. Assuming that the length at 96 inches and the height at 4 inches will work with the available space you have of course.
view full answer...What you see in the attached picture is what you'd get if you ordered the Pre-Drilled Rubber Bumper part #D4-96 that you referenced. It has an odd shape that doesn't completely match the description of round or square, but the picture shows…
view full answer...If you installed the Curt harness part #C76CR on your vehicle and it's acting like it's not active that would most likely indicate that you didn't run the red wire to the battery or even more likely the fuse didn't get installed in…
view full answer...Related Searches
Filter Your Search
Contact and Help