Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
If you only have 1/8 to 1/4 inch of space to close your garage the Trailer Valet you'd need is the part #STC-V211 which attaches to the frame of the trailer because of that would not add additional length to your trailer which would reduce your…
view full answer...The Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball #TVXL25 actually has a 10,000 lb trailer weight capacity and 1,000 lb tongue weight capacity. It is very likely that your 20 foot travel trailer will have a weight that is…
view full answer...I can help you out here as we do have both the driver side and passenger Low Profile LED RV Tail Light. The matching passenger side has 9 diodes though because it does not have bulbs to light up the license plate. The two matching lights are the…
view full answer...Yes, you can switch from the 2-5/16" hitch ball to a 2" hitch ball with the Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball - 10,000 lbs #TVXL25. All you will need is the 2" Hitch Ball w/ Base for Trailer…
view full answer...Thanks for reaching out! The purpose of the Trailer Valet Trailer Wheel Dolly for Tandem Axle Trailers #TV56FR is to give you better maneuverability with a tandem axle trailer when utilizing a trailer dolly like the Trailer Valet XL #TVXL25. The…
view full answer...We have a help article that covers how to test to see if trailer brake magnets are bad that I attached to this page. You'll need a multimeter like part #PT29ZR and access to a car battery.
view full answer...That is correct. There is nothing to support the bumper when you install the Curt Hitch item #C15398 on a 2013 Toyota Tundra. That hitch was designed for the trucks without the factory hitch so there's no reason for it to have built in support…
view full answer...Yes, you can! We've spoken to Curt about this exact issue before and we do have a solution. The Curt Hitch item #C15398 is designed for the 2013 Toyota Tundra's that come without a factory hitch. However, it will fit the Tundra's that…
view full answer...The closest grease caps we have available to the 2.04 inch hub bore diameter you provided are the Bearing Buddies #BB2047. These are designed for 2.047 inch hub bores so they should work great. They will replace the existing grease caps and provide…
view full answer...Most trailer hitch balls have a flat part on two sides of the base like the 2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000 #A-90 for example. You will simply need a open end wrench large enough to fit that. Vise…
view full answer...The correct stainless steel guide bolt for your #T2HRCM10DAC is the Replacement Guide Bolt for Kodiak Calipers - Stainless Steel #KGBS.
view full answer...I reached out to my contact at Dexter regarding the numbers you gave. They couldn't match anything and suggested that you most likely have a 8-91A, which is a 4 on 4 bolt pattern. That is a very basic trailer hub assembly and the replacement part…
view full answer...Related Searches
Filter Your Search
Contact and Help