Flush mounted latch with stainless steel spring, stainless steel latch body, sturdy steel T-handle, and durable locking cylinder. Mounts in 2-3/4" x 3-3/4" hole.Features: Stainless steel latch body and sturdy steel T-handle Mounts in 2-3/4" x 3-3/4" hole
Replace the old locking latch on your door, toolbox, or storage compartment with this sturdy paddle-handle latch that locks with the included key. Safety lever allows the lock to be disengaged from ... Features: Locking latch with paddle handle replaces an old latch on your door, toolbox, or storage compartment Locks with included key Safety lever allows the lock to be disengaged from the inside
Flush mounted latch with stainless steel spring Locking cylinder Stainless steel construction Overall dimensions: 4-3/4" wide x 3-5/8" tall Mounting hole dimensions (center to center
This retrofit latch kit for your toolbox has a lock that codes to your ignition key. Corrosion-resistant lock is made of automotive-grade materials and is nearly impossible to pick or bump.Features: Replaces the factory latch on your truck-bed toolbox Lock uses your vehicle's ignition key - you'll always have the right key with you Insert your ignition key into the BOLT
Flush mounted latch with stainless steel faceplate and T-handle with zinc-plated link rods and durable locking cylinder.Features: Stainless steel latch body and T-handle Zinc-plated link rods and lock 2-3/4" Long x 3/8" diameter link rods with rod guides included Mounts in 2-3/4" x 3-3/4" hole
According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
Assuming that when you tested the resistance of the brakes you were testing the two wires on each magnet and getting 2.0 and 2.8 ohms the magnets on your trailer are not working correctly and will need to be replaced. For 7" brakes you should…
The spindle dimensions you have do not match any of the standard trailer spindles that are available so we do not have any hubs that would fit them. Honestly your best option is going to be to replace the axles. Installing new spindles is a…
The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…
Based on my research Dexter seal 63052 appears to have been used in a military trailer application. I also could not find a current production seal that cross-references with this one. In this case the way to find a new seal is to measure the hub…
In order to keep the two group 27 batteries on your 2016 Jayco Trailer maintained while in storage I recommend using the Go Power Eco Solar Kit part #34273837. This kit will provide your batteries with up to a 1.14 amp maximum power current which…
The bolt pattern of the Dexter Hydraulic Drum Brake Assembly #23-402-403 that you referenced is is 4.92 inch by 4.92 inch and the diameter of the bolt holes are .545 of an inch.
The modern size equivalent of the 20.5x8-10 that you have currently would be the same size tire that is on the #AM3H340 that you referenced, 205/65-10. As long as the bolt pattern of your current hubs are 4 on 4 inch the wheels of this would bolt up…
The wear plate in the Roadmaster #RM-2000-25 is 16" long x 8" tall and the holes are spaced 14-1/2" apart. The spacer plate is 4" long x 3" tall and 1/4" thick.
I attached a picture of the dimensions or the Lippert Door Window Frame part #LC363370 that you referenced. The size you have is the standard that this is designed to fit.
We can help you with installing a trailer brake controller like the Curt Venturer time-delay controller #C74VV in your 1995 Ford F-150 to operate the brakes on your Hornet trailer. The parts you need depend on how the truck is equipped. If the truck…
You would have to purchase the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black, #BWTS10037B as a complete hitch assembly to upgrade to the 2 inch and 2-5/16 inch ball. The different size ball…
Replace a broken or damaged handle on your toolbox or camper shell with this locking T-shaped handle. Chrome finish is corrosion resistant. Two #751 keys are included.
Replaces 1 locking toolbox handle latch for DeeZee specialty series toolbox with Brite-Tread aluminum (DZ61, DZ67, DZ70, DZ71, or DZ79).Features: Replaces a locking toolbox handle latch for DeeZee specialty series toolbox with Brite-Tread aluminum (DZ61, DZ67, DZ70, DZ71, or DZ79) Locking, stainless steel T-handle with guide plate
Keep your truck cap, bed cover, or toolbox secure with this locking T-handle latch. It replaces 1 broken or damaged T-handle. Sturdy die-cast steel construction.Features: Locking T-handle latch replaces 1 broken or damaged T-handle Sturdy die-cast steel construction Keyed alike using single-sided 751 style key Black color Lifetime warranty
Replaces 1 locking handle latch for DeeZee toolboxes with a hook-style locking mechanism. Includes 2 keys.Features: Replaces the locking paddle latch for DeeZee toolboxes Fits toolboxes with hook-style locking mechanisms Includes 2 keys
Replaces the compression latch for your RC Manufacturing underbody truck or trailer toolbox (UB1818-36).Features: Replaces the compression latch for your RC Manufacturing underbody truck or trailer toolbox (UB1818-36) Quantity: 1 replacement latch
Bolt this handle onto your toolbox, truck box, chest of drawers, or anywhere you need a pull handle. It's made of durable carbon steel and has a corrosion-resistant zinc finish. Includes 4 ... Features: Chest handle can be added onto or used as a replacement part for a toolbox, truck box, or chest of drawers Also great for various agricultural or utility products Lightweight carbon steel
Replaces the paddle latch and key for RC Manufacturing A-frame tongue-mounted toolboxes (350970, 350975, 350980, 350990, and TBT1414-30). Stainless steel construction resists rust and corrosion.Features: Replaces the paddle latch and key for RC Manufacturing A-frame tongue-mounted toolboxes Models 350970, 350975, 350980, 350990, and TBT1414-30 Stainless steel construction resists rust and
Replacing a damaged BOLT lock cylinder on your toolbox or changing it so you can code it to a different key? You'll need this retaining nut to install the new cylinder.Features: Retaining nut is necessary when changing out a cyclinder in a BOLT toolboxlatch Nut secures cylinder into place Threaded nut is made of stainless steel Fits BOLT lock cylinders Made in
Replaces latch, lock, and keys for early model Weather Guard D-Handle steel underbed and Hi-Side toolboxes. Fits series 1 and prior models.Features: Replaces latch, lock, and keys for Weather Guard D-Handle steel underbed and Hi-Side toolboxes Key 07 Quantity: 2 keys Fits: Weather Guard Hi-Side toolboxes: 246-3-01, 264-3-01, 272-3-01
This retrofit latch kit for your toolbox has a lock that codes to your ignition key. Corrosion-resistant lock is made of automotive-grade materials and is nearly impossible to pick or bump.Features: Replaces the factory latch on your truck-bed toolbox Lock uses your vehicle's ignition key - you'll always have the right key with you Insert your ignition key into the BOLT
This retrofit latch kit for your toolbox has a lock that codes to your vehicle's ignition key. Corrosion-resistant lock is made of automotive-grade materials and is nearly impossible to pick or ... Features: Replaces the factory latch on your truck-bed toolbox Lock uses your vehicle's ignition key - you'll always have the right key with you Insert your ignition key into the BOLT
This retrofit latch kit for your toolbox has a lock that codes to your ignition key. Corrosion-resistant lock is made of automotive-grade materials and is nearly impossible to pick or bump.Features: Replaces the factory latch on your truck-bed toolbox Lock uses your vehicle's ignition key - you'll always have the right key with you Insert your ignition key into the BOLT
This retrofit latch kit for your toolbox has a lock that codes to your ignition key. Corrosion-resistant lock is made of automotive-grade materials and is nearly impossible to pick or bump.Features: Replaces the factory latch on your truck-bed toolbox Lock uses your vehicle's ignition key - you'll always have the right key with you Insert your ignition key into the BOLT
This retrofit latch kit for your toolbox has a lock that codes to your ignition key. Corrosion-resistant lock is made of automotive-grade materials and is nearly impossible to pick or bump.Features: Replaces the factory latch on your truck-bed toolbox Lock uses your vehicle's ignition key - you'll always have the right key with you Insert your ignition key into the BOLT
Filter Results
