Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hello William, thanks for reaching out. The GearSpace 34 Enclosed Cargo Carrier #HGK819 gives you only 10" from the hitch pin hole to the closest edge of the carrier. Because of this limited space, there would be no way to install this carrier…
view full answer...We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…
view full answer...Pin box bolt torque is based on the size of the bolts. 1/2 inch Bolts GR5 90 ft-lbs 5/8 inch Bolts GR5 150 ft-lbs 3/4 inch Bolts GR5 275 ft-lbs
view full answer...Ideally you want your trailer to be towed as level possible and still have at least 6 inches of clearance between overhang of the trailer and the bed rails of the truck. Since trucks tend to keep getting built taller and taller this can prove to be…
view full answer...You do not need to order the part #LC84PJ with the Lippert lift kit part #RR23QX as that's just a replacement part that comes with the kit.
view full answer...Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…
view full answer...There is no physical Bluetooth button on the RV Bluetooth Portable Speaker #DR65FR the Bluetooth feature is always on, so you'll just need to go into your Bluetooth menu on your device and select "EEVD-08". From here you should be…
view full answer...Hi Duane, Air Springs are better for leveling loads and will typically give you a rougher unloaded ride quality so these might not be the best option for your setup depending on what your intended use is. Air springs are the best option when it comes…
view full answer...Hey Steve! The PullRite SuperGlide #PUL83RR will not contact the tailgate on your 2025 GMC Sierra 2500. They have tested this extensively and said making contact and causing damage is not a concern. This is a really great hitch and autoslide is the…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
view full answer...Hey Tim, the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F2709 will indeed fit your 2024 GMC 2500 AT4X with a factory suspension lift. You will likely need to use a spacer kit to compensate for the lift, depending on the amount of…
view full answer...Filter Your Search
Contact and Help