Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4045KA is actually the same unit as the PD4045KV. The KV is just an alternate part number for the same unit so this is the one that you want for a replacement.
view full answer...For a bearing kit for a Dexter 5200 axle we have the kit part #BK3-300 which comes with the correct bearings, races, and seal for your axle.
view full answer...I spoke with the manufacturer of the SmartPlug RV and Marine Power Inlet and Connector #SM67FR and for your application they actually recommend using 6 AWG wire to properly supply your RV with power from the shore power pedestal.
view full answer...Thanks so much for the photo that was super helpful, and what the axle tag shows is that you have a #11 Dexter Torflex axle. We do have the correct lift kit for you, which is the following part: - Torflex Lift Kit - Tandem Axle #K71-724-02 This kit…
view full answer...The Torflex Lift Kit #K71-707-02 is for #10 Torflex axles. From what I could find on your Airstream Flying Cloud 28 RBT, it looks to most likely have #11 Torflex axles, which would mean that you want the Torflex Lift Kit #K71-724-02. I do recommend…
view full answer...Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…
view full answer...You are correct that you'll need to attach the AC Converter Hot (Black Wire) to a 15 amp breaker when installing the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4045KA. You will not be limited to 15 amps on the DC…
view full answer...When it come to wiring your Atwood GC6AA-9E hot water heater, you're going to want to go with a wire that's sized to accommodate the heater's current requirement. For example, a 20-amp hot water heater needs 12-gauge wire, a 25-amp hot…
view full answer...I went to our warehouse and measured the Mighty Cord Replacement 30-Amp RV Power Inlet #A10-30INBKVP and found its four mounting holes are 1/8-inch diameter and they are spaced apart 2-7/16-inches on center.
view full answer...All of the wiring at the back of the Progressive Dynamics Mighty Mini #PD4045KA that you referenced is 10 gauge.
view full answer...The Connector Kit, part #DZ97960 is designed to work with an auxiliary tank like part #DZ91752X. This system has a gravity feed to transfer diesel fuel from your auxiliary tank to your OEM tank but there is no automatic shutoff. I called my contact…
view full answer...I spoke to my contact at DeeZee about your situation and his response was to make sure you are sitting still with the engine off for the valve to work properly. If you have the engine running it can cause damage to the truck.
view full answer...Related Searches
Filter Your Search
Contact and Help