This multi-function, vehicle-end connector converts any 4-way flat, vehicle-end plug to a combination 7-way outlet and 4-pole flat outlet. power Dust covers keep connectors clean when not in use Split loom keeps wires contained and well protected Simple installation Wiring harness plugs into existing 4-way flat connector and hardwires to
Quickly and easily convert a 7-pole, RV-style connector to a 4-way, flat connector with this RV connector adapter. Adapter has a non-corrosive nylon shell.
Replace your damaged 7-way, RV-style, trailer-end connector with this molded cable. Durable cable covering resists damage. Wiring codes are RV standard.Features: Pre-wired, 7-way, blade-style, trailer-end connector allows you to connect your trailer to your vehicle Easy-to-grip tabs allow for simple plug in and disconnect Flexible cable allows for
Replace a damaged 7-way, RV-style, vehicle-end trailer connector with this Quick-Install connector. The 7-pole connector plugs in quickly and easily on your vehicle that has a factory tow package.Features: Replacement 7-blade, RV-style trailer connector socket for your vehicle Compatible with vehicles that have factory tow packages Plug-In Simple installation - connects to wiring harness
2-Wire pigtail has a male plug on one end that pairs with the female connection on your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back ... Features: Pigtail with 2-prongplug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics side marker, clearance, and utility lights Right-angle design
We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…
Typically 4-way wiring consists of 18 and 16 gauge wires. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector #W787264. The part #HM38138 uses 18 gauge for all wires but the white that uses 16 gauge.
The Optronics LED Trailer Clearance or Side Marker Light #MCL66RB and its amber counterpart #MCL66AB are both surface mount installations so you would just need to use the appropriate screws for whatever material you'll be mounting them too. I…
I looked up your EZ Loader part number and it appears to be the same design as the part #AL91AB which for the matching grommet you'd then need the part #A91GB. You'll also need the wiring harness #A46PB.
On a 7-Way connector the suggested minimum wire gauge for the White (ground) wire, the Red or Black (power) wire, and the Blue (brake power) wire is 12 gauge. The minimum wire gauge for the remaining Green (right turn/brake) wire, the Yellow (left…
We can get you set up to add back up lights and a 7-way to your boat trailer, and I'll go over what you'll need. Let's start with the back up lights, and for your boat trailer you'll want submersible lights like you said, the GloLight…
In order to splice into the wire and add yellow side marker lights like the #MCL13A2B I recommend using the Self-Stripping Connector with Waterproof Sealant #SWC501746-1. This is designed to make a quick connection without cutting or stripping, and…
It sounds like you have a pretty good idea of what you need. You will need a 7-way connector as well as a brake controller. You'll first need to choose a brake controller. The option with the easiest installation would be the Curt #C51180 Echo…
To install a 7-way on your 2017 Kia Sedona first requires you to install a 4-way like the Curt kit part #C56332 which is a confirmed, custom fit for your vehicle. Then to convert it to a 7-way for just the taillight functions (since you don't…
You can convert surge brakes to an electric over hydraulic braking system. To do this, you will need an electric over hydraulic actuator and a brake controller. For an electric over hydraulic actuator, I recommend looking at the Carlisle HydraStar…
I'm guessing it is approximately 3-3/8" across if you measured it. Unfortunately there are no options that will slide in because it won't line up correctly, and everything is designed to fit a 3" tongue so it is too wide to mount an…
To be on the safe size, I recommend going with a 13 inch bracket #CE10002G-4 at the back of the trailer and an 11 inch bracket with #CE10003G at the front. A nice feature on these brackets is that they will each actually have as much as 3-3/4 inches…
This 2-wire pigtail has a male plug to connect to the female socket on your trailer light. 6" Power wire splices into your trailer's wiring. Designed for side marker, clearance, and utility ... Features: Pigtail with 2-prongplug allows you to wire your light to your trailer Designed for use with side marker, clearance, and utility lights Simple installation Connect plug to the back of your
Quickly and easily replace a damaged 7-way and 4-way, or add a new one to your vehicle with a factory tow package. The twist-in socket has heavy-duty weatherproofing and features a cover that opens 180 degrees. plug-in installation - just insert into tow package port and twist No cutting or splicing No tools needed Enhanced weatherproofing with internal seals and corrosion-resistant terminals Durable ABS plastic
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wire lead is 10" long. Designed specifically for backup and ... Features: Pigtail with 2-prongplug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics backup and utility lights Male-pin, 2-prong PL-3 molded
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Peterson light. Right-angle plug allows wires to run down from light instead of straight out ... Features: Pigtail with 2-prongplug allows you to wire your Peterson light to your trailer Designed specifically for use with Peterson backup and utility lights Right-angle design of plug allows
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out ... Features: Pigtail with 2-prongplug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics backup and utility lights Right-angle design of plug allows
This 2-wire pigtail has a 2-prong PL10 plug on one end that connects to the back of your Custer light. Designed specifically for side marker and clearance lights.Features: Pigtail with 2-prongplug lets you wire your Custer light to your trailer Designed specifically for use with Custer side marker and clearance lights Male-pin, 2-prong PL-10 plastic plug
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Peterson light. Designed for backup and utility lights. 19" Lead.Features: Pigtail with 2-prongplug allows you to wire your Peterson light to your trailer Designed specifically for use with Peterson backup and utility lights Male-pin, 2-prong PL-10 molded plastic
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wire lead is 75" long. Designed specifically for side marker ... Features: Pigtail with 2-prongplug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics side marker, clearance, and utility lights Male-pin, 2-prong
2-Wire pigtail has a male plug on one end that pairs with the female connection on your trailer light. Designed for side marker, clearance, and utility lights.Features: Pigtail with 2-prongplug allows you to wire a light to your trailer Designed for use with side marker, clearance, and utility lights 2-prong PL-10 molded plastic plug connects to back of
2-Wire pigtail has a male plug on one end that pairs with the female connection on your Peterson light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed ... Features: Pigtail with 2-prongplug allows you to wire your Peterson light to your trailer Designed specifically for use with Peterson side marker, clearance, and utility lights Right-angle design of
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wire lead is 36" long. Designed specifically for side marker ... Features: Pigtail with 2-prongplug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics side marker, clearance, and utility lights Male-pin, 2-prong
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wire lead is 135" long. Designed specifically for side ... Features: Pigtail with 2-prongplug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics side marker, clearance, and utility lights Male-pin, 2-prong
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wire lead is 18" long. Designed specifically for side marker ... Features: Pigtail with 2-prongplug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics side marker, clearance, and utility lights Male-pin, 2-prong
This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Peterson light. Right-angle plug allows wires to run down from light instead of straight out ... Features: Pigtail with 3-prongplug allows you to wire your Peterson light to your trailer Designed specifically for use with Peterson stop/tail/turn lights, parking/turn lights, and warning lights
This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Peterson light. Color-coded wire lead is 10-1/2" long. Designed specifically for lights ... Features: Pigtail with 3-prongplug allows you to wire your Peterson light to your trailer Designed specifically for use with Peterson stop/tail/turn lights, parking/turn lights, and warning lights
This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out ... Features: Pigtail with 3-prongplug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics stop/tail/turn lights, parking/turn lights, and warning lights
... end make the plug easy to install and remove. degrees for effortless connection Pull grips on the 7-way round pin connector make plug easy to install and remove ABS plastic construction is strong and durable Flexible wire between plugs provides wide
Filter Results
