This yellow butt connector joins two lengths of 12-10 gauge wire. Insulated with heat-shrinkable nylon for adjustability and durability.Features: Fits 12-10 gauge wire Heat-shrinkable nylon insulation allows for adjustability and provides durability Yellow Quantity: 10
This yellow butt connector joins two lengths of 12-10 gauge wire. Insulated with heat-shrinkable nylon for adjustability and durability.Features: Fits 12-10 gauge wire Heat-shrinkable nylon insulation allows for adjustability and provides durability Yellow Quantity: 5
This yellow butt connector joins two lengths of 12-10 gauge wire. Insulated with heat-shrinkable nylon for adjustability and durability.Features: Fits 12-10 gauge wire Heat-shrinkable nylon insulation allows for adjustability and provides durability Yellow Quantity: 1
Closed port quick splices self-stripping connector is a 2 channel wireconnector that is designed to splice into an existing wire without having to cut, crimp or strip the existing wire.Specs: Quantity 1 Gauge: 10-12 Maximum power rating: 600 volts Color: yellow Additional tools needed: pliers Features: Closed port quick splices self-stripping connector Designed to splice into an
Hey Henry, the weight capacity of the Timbren suspension system part #T92MR is 5k for the axle or in other words for both of them combined. You should note this doesn't increase the towing capacity of your vehicle by this much weight as instead…
There's going to be two ways to wire your Go Power Industrial Pure Sine Wave Inverter #34275013 but the transfer switch you have between the shore power and generator power is going to stay how it currently is. The internal transfer switch is…
Since a transfer switch will only switch between two ac sources, if your initial transfer switch only has shore power connected to it then you could wire in the Go Power Inverter #34279950 you referenced to provide power to the coach. You need to be…
The tire pressure monitoring system I would recommend for a "beginner" or anyone looking for the easiest to setup and easiest to use in general is the TST TPMS part #TST-507-FT-4. The reason I recommend it is because it installs easier by…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…
Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…
The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to measure…
There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…
Hey Thomas, the most important factors for picking out a replacement leaf spring for a trailer are matching axle capacity and length. Getting the same amount of leaves in the spring pack is actually not a huge priority so I wouldn't worry too…
Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…
Hey Mark, I looked up the specs of the spring you have now and found that it is a 24-3/4 inch long spring from eye center to eye center and for a 7k axle. So that means that the replacement spring part #EM28AJ that you referenced will work great as a…
Closed port quick splices self-stripping connector is a 2 channel wireconnector that is designed to splice into an existing wire without having to cut, crimp or strip the existing wire. of the connector Provides an open channel for existing wire and a closed channel for tap wire Pliers needed to squeeze down on the blade after wires are placed Specs: Quantity 1 Gauge: 14-16-18/10-12
This yellow ring terminal fits 12-10 gauge wire and size 10 studs or screws. Insulated with heat-shrinkable nylon for adjustability and durability.Features: Fits 12-10 gauge wire Fits size 10 studs or screws Heat-shrinkable nylon insulation allows for adjustability and provides durability Yellow Quantity: 1 1-Year limited warranty
Ring terminals are used for all types of electrical work where wires need fastening For use with 12-10 gauge wire Stud size: 3/8" Vinyl insulation sleeve is yellow
This yellow ring terminal fits 12-10 gauge wire and has a 1/4" ring inner diameter. Insulated with heat-shrinkable nylon for adjustability and durability.Features: Fits 12-10 gauge wire 1/4" Ring inner diameter Heat-shrinkable nylon insulation allows for adjustability and provides durability Yellow Quantity: 1 1-Year limited warranty
This yellow ring terminal fits 12-10 gauge wire and has an inner ring diameter of 3/8". Insulated with heat-shrinkable nylon for adjustability and durability.Features: Fits 12-10 gauge wire 3/8" Ring inner diameter Heat-shrinkable nylon insulation allows for adjustability and provides durability Yellow Quantity: 1 1-Year limited warranty
Ring terminals are used for all types of electrical work where wires need fastening For use with 12-10 gauge wire Stud size: 5/16" Vinyl insulation sleeve is yellow
Ring terminals are used for all types of electrical work where wires need fastening For use with 12-10 gauge wire Stud size: 3/16" Vinyl insulation sleeve is yellow
12Volt power socket with light works great when mounted in the trunk, truck bed or tool box. Now you can have power and light where you need it. 17' Long wire and fuse included for installation. Weather-resistant dust cover Specs: 17' Long wire and fuse assembly included You've got the power, it's just that you were unaware of it. Simply install the 12-volt socket anywhere you need a power source
You've got the power, it's just that you were unaware of it. Simply install the 12-volt socket anywhere you need a power source, and enjoy the possibilities. 17' wire and fuse included ... Features: Convenient - mounts anywhere 12-volt power is needed Surface-mount design Weather resistant dust cover built-in Includes wiring harness Specs: 17' Long power wire and fuse assembly
7 general-purpose primary wires in a black vinyl jacket. Heavy-duty compact cable protects insulated conductors against weathering, chemicals, and abrasion. Wires are 12 Gauge White wire is 10 Gauge Manufactured to SAE and ATA specifications Meets SAE J1128 specifications for use with 50 volts or less Made in the USA Specs: Total diameter: 0.4" Quantity
Brightens the inside of your utility trailer to make it easier to load or unload your gear after dark. Mounts on the surface of your trailer, includes (2) 0.180" bullet connectors for wiring ... LEDs Wide, even flood pattern Easy installation on the surface of your trailer's ceiling or wall - hardware not included Rubber mounting base included 2-Wire design with 0.180" bullet connectors
This all-inclusive kit contains a multipurpose wire tool; 12-V LED circuit tester; terminal cleaner, connectors; ring and fork terminals; zip-ties; ground screws; and more. Perfect for hardwiring ... cutting, stripping and crimping (1) Terminal cleaner (1) 12-V LED probe circuit tester (1) Grit sandpaper cloth (1) Roll of electrical tape (12) Cable clamps (16) Butt connectors (3) Terminal grease packets
3-1/2" Round. Waterproof, LED trailer light with reflex reflector serves as a side marker light or a clearance light. Recessed mount with flange. 2-Wire pigtail with butt connectors. P2 rated. Recessed mount with built-in flange - hardware not included Requires a 2-3/4" diameter cutout for installation Foam mounting gasket creates a weathertight seal 2-Wire pigtail with butt connectors P2
6-1/2" Waterproof light displays brake, tail, and turn signals on your trailer. Mounts in a cutout with a grommet (sold separately). The weathertight connector blocks out moisture: Dimensions: 6-1/2" long x 2-1/4" tall x 1-3/4" thick Compatible with 12V DC systems Diodes: 6 Power draw at 12.8 volts: Stop/turn signal light: 0.161 amps Tail light: 0.007 amps Lifetime
... . 3-Wire pigtail. light Stainless steel hardware included 3-Wire design 20-Gauge wire White wire for ground Brown wire for tail light Yellow wire for stop and turn lights Includes twist-on wireconnectors DOT compliant
5-1/4" x 5" Square. Waterproof trailer light acts as brake, tail, turn, side marker, side reflex reflector, and rear reflex reflector. Mounts on surface of trailer. 3-Wire pigtail. hardware included 3-Wire design 20-Gauge wire White wire for ground Brown wire for tail light Green wire for stop and turn lights Includes twist-on wireconnectors DOT compliant Meets FMVSS 108 requirements
Filter Results
