Recommended Brake Controller and 7 Way Connector for 2006 Acura RX 400h
Hi- We have an 06 Lexus 400h that has factory- installed 4-way wiring next to the tow hitch. Were planning on renting a tear trailer that requires the 7 way wiring connector. I see you have a couple of kits to adapt what we have 37185 or...
Will Trailer Wiring Ruin the Paint Finish on a Chrysler 300C When Routed Out of the Trunk for Towing
Just wondering if the wires are stored in the trunk and pulled out for towing will the wires rubbing on the paint scratch and ruin the finish. I have a 300c that I put a hitch on and the installers left the wiring in the trunk. I feel like...
Trailer Hitch Recommendation for 2006 Chrysler 300C SRT
My 2006 Chrysler 300C is an SRT is there any difference from standard 300 Thanks | The Draw Tite hitch part # 76145 that you referenced is a confirmed fit for your 2006 Chrysler 300C SRT and would work well. I attached an install video for...
How High Will CE Smith 13 Inch Bolster Bracket Sit Above 3 Inch Crossmember
I am going to be replacing rollers with bunks on my ez loader trailer. The boat will need to sit rather high due to the width as the boat will need to be above the wheel fenders. For the two inside bunks, the boat will need to be at least...
Can The Spare Tire Still Be Accessed After Installing The Etrailer Hitch On A 2007 Lexus RX 400H
For a 2007 Lexus RX 400h. Is the hitch built so the spare tire will come down as it should if needed? | The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" Item # e98857 on your 2007 Lexus RX 400h does still...
Adding an Anti-Rattle Device to Replacement Swagman Bike Rack Shank for 2 Inch Trailer Hitches
Hi, Will part # P5901 and part #P313 work in partt # P249 so I can achive an Anti-Rattle fit? | The threaded pin, # P5901, will only fit Swagman racks that have a 2 inch shank. The anti-rattle insert fits in a 1-1/4 inch shank. So these parts...
Recommended Ball Mount for Curt Trailer Hitch on a 2018 Chrysler 300
What ball mount do I need to use with my Curt 13236 hitch installed on my 2018 Chrysler 300? | Based on our research the top of the inside of the Curt Trailer Hitch # C13236 is going to be about 11-3/4" off of the ground when installed on your...
Recommended 4-Pole Trailer Wiring Harness for 2006 Lexus RX 400h
I dont find a plug and play tow vehicle harness for a 2006 Lexus RX400H Would a 2006 Highlander harness be used on the Lexus, thought they may be close to similar. thanks. | The reason there are no plug-and-play trailer wiring harnesses for...
Locating Cold Side of Brake Stoplight Switch to Install Brake Controller on 2007 Lexus RX 400h
Cant find the brake wire to tie the red lead from an Activator 4-wire brake controller. There is a 4-wire connector on the right side of the brake pedal, but when disconnected the brake light still operated. Where can I find the correct wire...
Dimensional Drawing for Curt Hitch 13465
Are you able to provide the same sort of dimentioned diagram for the Curt #13465 2inch trailer hitch as was supplied to this other poste I really need to check some of the overal depth and height measurements of the mounting arms in relation...
Fit of Thule OutWay TH45JV on 2007 Lexus RX400h
Have a factory installed spoiler on the back of the 400h hatch, above the rear window. Wondering if it is safe to hook the thule outway 2 onto it or will the weight of the bikes rip the spoiler off the vehicle? | In many cases, having a solid...
4-1/2 inch Rise Ball Mount Recommendation for a 2007 Chrysler 300C Towing Trailer
Could you please recommend a ball mount? My car is a 2007 Chrysler 300c. I installed your Curt Class III hitch, #13465. The distance from the ground to the bottom of my trailer coupler is 15.5 inches. The distance from the ground to the...
Recommended 2-Bike Hitch Rack for Heavy Bikes
Im looking for a 2 bike rack for a 2006 Lexus RX 400h. Both bikes are heavier than 35-lbs, and the electric is 61-lbs with the battery. I have a 2inch hitch. Im interested in a rack that is easy to take on and off since I would not leave it...
2014 Chrysler 300C with Panoramic Roof Rack Recommendation
2014 Chrysler 300C with panoramic roof - Roof Rack System Is there a Thule system out there or other options? I see the Rhino Racks and possibly the Inno but they all show installed on cars with no panoramic sunroof. | We have roof racks that...
Higher Capacity 24-5/8 Inch Long Slipper Spring
Hello, I recently received and installed your leaf springs SP-177275 on a chassis for a tear trailer Im building. The shell is feeling heavier that what I had in mind, and I worry that these springs will be overwhelmed. Is there a heavier spring...
Prodigy P3 Trailer Brake Controller Installation in 2008 Lexus RX 400h with 4-Pole Wiring
Hello, HELP !!! Our family SUV is equipped properly for us to tow up to 3,500# dry weight. We only have a factory installed flat 4 pin connector which has been fine for a small boat, but now we are getting a small hybrid travel trailer with...
Will Curt Class III 2 Inch Hitch # 13465 Fit a 2006 Chrysler 300C SRT-8 Model
Will this fit a 2006 Chrysler 300c srt-8? Thanks in Advance. | I spoke with my contact at Curt and they said that the Curt Class III 2 Inch Hitch, part # 13465 will fit the 2006 Chrysler 300C SRT-8 model. I am including a link to the installation...
Rain Shield Window Visors for 2015 Chrysler 300C
Does this come in a 4 piece set? I only see the P480181 in 2 pieces | We do have that as well! You can get a 4 piece set of the Putco Element Window Visors in Chrome with part # P480180 , which are a tape on rain shield for use on the 2015 Chrysler...
4-Way to 5-Way Adapter Recommendation for Activating Reverse Lock Out Solenoid
I need to buy a wiring harness and connector from you. Im new to trailering boats. We just purchased a boat with a trailer that has brakes. I was told that the trailer brakes are weight shift activated and it has a reverse lockout solenoid....
Does Yakima RocketBox Pro 14 Fit OEM Crossbars of 2007 Lexus RX 400h
Hi - Im trying to determine if I can attach this box to my factory crossbars on a 2007 LexusRX400h or if I need a different box. Or if to attach different crossbars to the raised rails then attach a box. Thanks! | Yes I checked with Yakima just...
Recommended Trailer Hitch for 2007 Lexus RX 400h for Use with Motorcycle Carrier
Questions about a 2007 Lexus RX400h tow.... Im thinking of installing a hitch on my 07foot lexus 400h. Im thinking of using the hitch to install a type of single dirt bike rack. The combined weight of the rack and the bike will be 300lbs. Is...
Towing Capacity and Parts Needed for 2006 Lexus RX 400h
I know nothing about cars. Can you explain it to me like a toddler....in not kidding. Ive been googling for hours and half of my googling is just for mechanical terms. I have the Lexus rx400 2006 model. Im planning to tow a 2000lb trailer, will...
Does Installing Trailer Wiring Harness for the 2006 Lexus RX400H Require a Battery Connection
Does the code 119147KIT trailer wiring harness for a 2006 Lexus RX400H require a wire be run from the rear of the vehicle to the battery? | Yes. The # C59496 trailer wiring harness for the 2006 Lexus RX400H does require a separate power wire...
Installation of Prodigy P2 on 2008 Lexus RX 400h
Please advise have 08 Lexus RX400H, what do I need to connect my Prodigy P2 controller so I can operate my trailer brakes, Thanks | For your 2008 Lexus RX 400h, you will need to use the # ETBC7 kit to wire your brake controller. If you have...
Filter Your Search
Contact and Help