Can RockyMounts HighNoon FC Solo Bike Rack Carry Bike with Flat Front Tire
I have a RockyMounts HighNoon FC Solo bike rack. My fat bike has a flat tire on the front and I want to haul it to the bike shop. Can I haul this bike with a front flat tire on this rack? Will it come loose on the highway? | The RockyMounts...
Gear Ratio and Minimum Load of Dutton-Lainson # DL11002 Worm Gear Hand Winch
What is the gear ratio for this winch DL11002? Also, Is there a minimum load required? Thank you! | The Dutton-Lainson # DL11002 winch you referenced has no minimum load requirements, and has a 40:1 gear ratio. |
Does Tow Ready Custom Vehicle Wiring # 118458 Require a Battery Connection, 2003 Pontiac Vibe GT
I have an 03 Vibe GT. Does this particular harness need power run directly from the battery? if so, is all cable included? | The Tow Ready Custom Fit Vehicle Wiring, # 118458, does not require a direct connection to the battery when installing...
How to Determine if Trunx Rooftop Box Fits Factory Crossbars
Hi. I have a 2004 Pontiac Vibe with the factory installed roof rack and crossbars. My concern is the crossbars which have a slight curvature to them instead of going flat across. Can I buy a rooftop cargo box from you that will work? Im...
Will Solera 12V Power RV Awning Conversion Kit Easily Replace Dometic Kit on RV
Hello, Im looking at converting my manual awning to electric. My current awning doesnt have the metal pieces that have to be bolted to the side of the trailer like this one. Im just worried that there may not be studs vertically where these...
What Is Combined Weight Of The Shank And Head Of Reese Weight Distribution System # RP66541
What is the weight of the head assembly including shank on the Reese RP66541? | The shank on the Reese Weight Distribution System, part # RP66541 weighs 15 lbs, and the head weighs 19 lbs, so the combined weight of these 2 items is 34 lbs. |
Why is Draw-Tite Hitch a Class I and Curt Hitch is a Class II for a 2006 Pontiac Vibe
Draw Tite is classified as class I and Curt is classified as class II. When I look at the specs they have matching specs: 200lbs tongue weight and 2000lbs towing. What makes the Curt a class II and it only bolts with 4 bolts? Draw Tite...
Will the Stay-IN-Play Work On a 2004 Pontiac Vibe With Brake Booster Behind Firewall
I have been studying the installation instructions and various youtube videos for installing the Demco stay and play breaking system DM86VR on my 2004 Pontiac Vibe. On your website It is confirmed to fit this car which is basically like a Toyota...
Is Hardware Included with Draw-Tite Hitch 24812?
The description doesnt mention if the mounting bolts and washers are included. I was wondering if I needed to pick some up? Thanks | Yes, all the necessary hardware and instructions are included with all of our hitches. |
What Draw Bar Fits Draw-Tite Class I Hitch Part # 24812
I have 3 - 1 1/2 drawbars. How can I tell if they will fit in the #24812 hitch? Is there a measurement of the pin hole location for this hitch? | The Draw-Tite Class I hitch you were looking at, part # 24812 uses a 1-1/4 inch receiver. A class...
Recommended Trailer Wiring Harness for a 2009 Pontiac Vibe
Hello, I have a 2009 Pontiac Vibe and have the Curt hitch installed. I need hitch harness for my utility trailer to operate the signal light. I see that there are two kind of hitch harness. Which one is recommended? | There are 2 options...
Will the Inno Feet for Square Crossbars Fit My 2009 Pontiac Vibe?
Will INXP fit the 2009 Pontiac Vibe base hatchback? I have fixed points with covers. Thanks! | I have a solution for you. Unfortunately, the Inno Feet for Square Crossbars # INXP will not fit your naked roof with fixed mounting points on your...
How To Install The T-One Vehicle Wiring Harness On A 2005 Pontiac Vibe
Im installing the wiring harness 118458 into my 2005 Pontiac vibe. The video link is very helpful. However the brake/tail light plug on the passenger side has three prongs instead of the two prong connector that comes with the assembly green...
Does Curt Hitch # C122343 Come with Mounting Hardware
Hello, I have a 2005 Pontiac Vibe AWD and interested in adding a tow package. It looks like the Curt C122343 fit perfect. But does it come with the mounting bolts too? | Yes, the Curt hitch part # C12234 that you referenced does come with all...
Husky Liners Floor Mats for 2009 Pontiac Vibe with Manual Transmission
I am looking for floor mats for my 2009 Pontiac Vibe but I see the one offered for sale is only for an automatic transmission, I require for a Manual / standard. Is there a set of Husky Liners that fit the bill? | I spoke with my contact at...
Lid Supports that Fit Yakima Skybox Carbonite 16
Hi, I have a Carbonite Skybox 16 and am in need of the three latches that are fastened along one side of the top lid. I understand that I will have to drill out the existing rivets and use nuts and bolts to refasten the three latches. I also...
Weight Distribution System Recommendation for a Trailer with 540 lbs of Tongue Weight
Hello, when using a weight distribution system, does that increase the load on the axles of the trailer? My trailer axle weight now is 2780 lbs., the tongue weight is 540 lbs. Will the axle weight increase if I use a weight distribution hitch?...
Trailer Hitch Receiver for 2003 Pontiac Vibe is Touching Muffler
I recently purchased a Curt hitch from you for my Pontiac Vibe. I left very good reviews because it did install very easily. I did not read all the reviews but Im going to have to make some modifications because the muffler is vibrating against...
Roadmaster Base Plate Kit for 2006 Pontiac Vibe to Work with Falcon Tow Bar
I have a falcon 5250 towbar need carside attachment,,,,for Pontiac Vibe,,2006 | For a base plate kit confirmed as a fit for your 2006 Pontiac Vibe the Roadmaster XL kit part # 3130-1 is a confirmed fit that would work well with your Roadmaster...
Trailer Hitch Receiver and Wiring Required to Carry a 64LB E-Bike With a 2005 Pontiac Vibe.
Im looking for a trailer hitch for a 2005 Pontiac Vibe. I want to hang a bike rack on it. All the hitches I see are 1 1/4 but the bike carriers are 2 inch. There adapters for thus problem but are they enough to support a 90 pound bike and the...
Hitch Availability for 2021 Mitsubishi Eclipse Cross
Im wondering do you sell hidden hitch for eclipse cross so its not always visible | The only hitch we offer for your 2021 Mitsubishi Eclipse Cross is the Curt hitch part # C12154 which is mostly visible and does not have a hidden hitch opening...
Parts Needed to Add Electric Drum Brakes to a Trailer and Brake Controller for 2007 Pontiac Vibe
hello I have a 1994 aliner sport model. I would like to install electric brakes. the trailer is only 800lbs. when loaded it can be hard to stop, with a small car. It has al-ko axle. it also has the 4 bolt flange installed. the tires are...
Will the Thule Outbound Cargo Bag Fit a 2005 Pontiac Vibe
I bought a used one from eBay, but am afraid my cross bars are not far enough apart. I am pretty sure they are less than the 36inch another Youtube video recommended. Will this fit a narrower spread? thanks | Having the cargo bag, # TH868, between...
What do Roof Rack Feet do for Inno Roof Rack on 2010 Pontiac Vibe With Naked Roof
Hello, I already asked a question and I had a response Though I dont understand the racks feet Im sorry Im not fluent in english, I speak french. Thank you ! | It sounds like you are asking the purpose of the "feet" of the Inno roof rack that...
Filter Your Search
Contact and Help