Availability of Replacement Install Hardware for Trailer Hitch
Do your hitches come with any replacement hardware if needed | We do sell replacement hardware for the trailer hitches we offer with the part # RHK. You'd need to enter the hitch part number and select the manufacturer from the drop down menu...
Curt Hitch C11202 for a 2010 Nissan Cube to Carry a Bike Rack
I need a hitch. I’m planning to carry A electric recumbent trike.. I converted my old steel carrier Into a trike capable carrier. 1. Which option is easier to install 2. The carrier plus the trike will weight between 60-100lbs 3. Will...
Adapter Needed to Clear Bumper of 1995 Cadillac Seville SLS
Hello, I have a 1995 Cadillac Seville sls. I have found the receiver hitch I need, but I will also need a 1.25 in to 2 in receiver adapter that also will raise/clear the 2 in adapter orifice around the rear bumper. In other words, the adapter...
Dimensions of the Curt Spyder Gooseneck Trailer Hitch # 16085
Where can I locate the spec.measerment on this product? | Curt does not usually provide their product drawings or spec diagrams for their products, but, if you were looking for a specific dimension on the Curt Spyder Gooseneck Trailer Hitch,...
Can a 5th Wheel Trailer with Sidewinder by Towed with No Wedge or Lock Out Bolts Installed
I have been working with Reese on questions about the Airborne Sidewinder pin box. Hopefully your tech department can help. we had this pinbox installed at the Northwood factory Arctic Fox and it was pulled 1300 miles to us. Its the first one...
Install C59496 on 1998 Cadillac Seville
hi, i purchased a wiring kit from you i have a 98 cadillac seville and was hoping you can tell me which wires are for brake lights turn signals running lights etc.. is it the same colors as on your wires on the kit? thanks for your help | US...
Curt or Draw Tite Trailer Hitch Recommendation for 2010 Nissan Cube
I am interested in a hitch for a 2010 cube but am concerned about the fit of thefit around the muffler. Just wondering if the kind which goes under the exhaust is better for fitment? Thanks for your time | The Curt part # C11202 is a confirmed...
Is Drilling Required to Install a Trailer Hitch on a 1999 Cadillac Seville
1999 Cadillac Seville, do I have to drill holes for this installation? | Drilling is actually not required to install Curt trailer hitch # C12265 on a 1999 Cadillac Seville. However, there is fascia trimming required. I have included a link...
Is Drilling Required for Installation of the Curt Hitch # C11202 on a 2011 Nissan Cube
2011 Nissan Cube will have to drill the 1inch hole? | The only drilling need for the receiver hitche # C11202 available for the 2011 Nissan Cube will be enlarging an existing hole in the driver side frame rail. I attached installation instructions...
Best Bike Rack that Allows For Easy Loading Of the Bikes and Into The Hitch
I am 81 years old. I have a Sun bike which I love to ride but I’m tired of riding just the streets in my small town and want to drive to other locations to ride plus some bike trails. I am not very strong so need a rack I can put on the car...
Trunk-Mount Bike Rack for 2013 Nissan Cube
please suggest 2 and 3 bike trunk racks | The two trunk-mount bike racks I prefer for the 2013 Nissan Cube are the Hollywood Racks 2-bike # HRF2 and the similar 3-bike versions # HRF2-3. Both feature an arched frame design that will put less...
Recommended Bike Rack to Carry a Day 6 Bike on a 2012 Nissan Cube
We have a 2 adult Day 6 bikes and a 2012 Nissan Cube. What bike racks can you recommended for us? I am looking at trunk mounted bike racks. The bikes are 38 lbs each, and the frames are not typical they are longer because the bikes are semi-recumbent....
Availability of Hitch, Trailer Wiring and Towing Accessories for 2014 Nissan Cube
As you might already know, Nissan has discontinued the cube in the USA. Do you still have a hitch and wiring harness for the 2014 model? | Curt Manufacturing does indeed offer a Class I hitch for the 2014 Nissan Cube, which we offer as part...
Troubleshooting Cruise Control Not Working On a 2011 Nissan Cube After 4-Way Installation
I installed the T-one on my 2011 Nissan Cube, and now the cruise control wont work. The cruise indicator just flashes. | The T-One Vehicle Wiring Harness # 118492 should not affect the ability of your 2011 Nissan Cube's cruise control. As the...
Trailer Hitch Installation on a 2009 Nissan Cube with Ground Effects
My model has the ground effects kit like the chrome model. Will this fit? Also, bought a 3 bike rack to slide into receiver. Do I need the pin to take it in and out when not in use? It will do 2inch and 1 1/4. | We do have trailer hitch options...
Could Scissor Jack be Used on Motorhome
I have a Class A 38’ motor home. Has hydraulic leveling jacks. One is broke and another one failing very soon it appears. Had an idea to just keep all of them in up position and use scissor jacks to level and stable rv. Cheaper then repairing...
Can One 50 Pound Bike be Loaded on a Trunk Mount Bike Rack on a 2004 Cadillac Seville
Will it carry a 50lb Mens Bommie Beach cruiser on a 2004 Cadillac Seville? I am just carrying one bicycle. | I do have a solution for you to carry your 50 pound Mens Bommie Beach Cruiser bike on your 2004 Cadillac Seville. But none of the trunk...
How Does Breakaway Function Work With Wireless Brake Controller
If using wireless trailer brakes, how does this sytem handle breakaway function. Do you not have to have the capability of breaks holding for 45 min in case of a disconnection? | When using a wireless brake controller like the Curt Echo Wireless...
Does Curt Trailer Hitch for 2010 Nissan Cube Require Stabilizing Strap for Bike Rack
Hello, Im looking at the Curt hitch for my 2010 Nissan cube. The Curt info says it requires a stabilizing strap for bike racks. Is that correct? My Cube has a rear spoiler that prevents an attachment point for a stabilizing strap, so the...
Trailer Hitch and Wiring for a 2011 Nissan Cube
Hi I just received my trailer- hitch and I have a few questions. Will I be able to tow a 200 lbs. boat and a 200 lbs. trailer with it. Also why am I cutting holes in the frame is it just for wiring. Please let me know. I have a 2011 Nissan...
Difficulty Removing Old Relay For Towing Package On 2010 Nissan Cube
Whats the easiest way to remove the old relay? Wont budge. | Typically, you can just pull the relays out. From my research I read that they can be in difficult to reach areas. If pulling it out does not seem to be working you may want to use...
Identifying Wiring on 2010 Nissan Cube for Installation of Curt Tail Light Converter # C56175
Im trying to find out what color wires on my 2010 nissan cube matches the colors on the hitch hookup I bought. The colors on car are differant. Left turn, right turn stop. Thank you | Often vehicle wiring colors are consistent to allow color-for-color...
Troubleshooting Trailer Brake Lights Not Functioning after Wiring Harness Install 2011 Nissan Cube
We installed the wiring, and everything works except the brake lights. Could it be a faulty wiring harness? Or is there something we could have done wrong? | The first thing you will want to do is test the 4-way of the # 118492 that you installed...
Parts to Install Rhino-Rack HD Roof Rack to 2013 Nissan Cube
not suitable for my car | The 54" Rhino-Rack HD Bars # RB1375 will fit your 2013 Nissan Cube but you also need the 2500 Series Legs # RRRLKHD and the Fit Kit # DK263. The legs are what hold your crossbars and the fit kit together while the fit...
Filter Your Search
Contact and Help