Features:
...Mounts 1 LP gas regulator on threaded tank rod Includes (1) bracket and regulator screws...
More Information >Features:
...Mounts 1 LP gas regulator on threaded tank rod Includes (1) bracket and regulator screws...
More Information >Features:
...Mounts 1 LP gas regulator on threaded tank rod Includes (1) bracket and regulator screws...
More Information >Features:
...Mounts 1 LP gas regulator on threaded tank rod Includes (1) bracket and regulator screws...
More Information >Features:
...Mounts 1 LP gas regulator on threaded tank rod Includes (1) bracket and regulator screws...
More Information >Videos
for Propane Fittings
Help Articles
for Propane Fittings
Expert Answers
for Propane Fittings
A direct replacement for your Winntec Model 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as the BTU rating is compatible and they have the same fitting sizes.
view full answer...To add a 100 lb tank to your two 30 lb tanks, I recommend the MB Sturgis Sturgi-Stay T-Fitting w Hose - Type 1 Valve - Quick Disconnect, Disposable Cylinder Ports #103615. This will allow you to connect the red fitting to one of your tanks and the…
view full answer...The difference between the prices of the JR Products Automatic Changeover LP Gas Regulators and Camco Automatic Changeover 2-Stage Propane Regulators are in the BTU per hour, which as you correctly noted, is important information. The JR Products…
view full answer...There are differences that the colors reference for the Type 1 Propane connectors based on the spring tension and flow rate. The light green connectors are rated for Rated for 200,000 Btu per hour. The black are rated for 70,000-100,000 Btu per hour.…
view full answer...Hey John, To start off you can thread the tee from the MB Sturgis Sturgi-Stay T-Fitting #103538-MBS and then use the include hose to thread into the second tank and plug it into one of the two quick disconnect ports to connect the tanks together.…
view full answer...For your propane tank with fill valve, you most likely need the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr #CAM59333. This will have the 1/4 inch NPt inlet and the 3/8 NPT outlet and will maintain a constant 11 inch water…
view full answer...I wasn't able to research a ton about the Atwood OD5001CW Direct Water Heater but I think we still have a great option for you in the Furrion RV Tankless Water Heater part #FR93FR which installs into a opening between 12 5/8”- 12 3/4” tall x 12…
view full answer...You'll be able to connect your Weber Traveler Grill directly to that quick-disconnect fitting using a hose like the MB Sturgis #100476-120-MBS as long as your grill doesn't have a regulator. If it does have a regulator then you need a tee…
view full answer...Hey Mark, To plug the unused ports on your JR Products RV LP Gas Manifold #JR65CR you'll just need the JR Products RV LP Gas Manifold Plug #JR25CR. We also offer a couple of adapters to make your connection to the ports easier: 1/2" x…
view full answer...Hey Lynn, I recommend using the MB Sturgis Sturgi-Stay T-Fitting w Hose #103615 which will allow you to connect your 20 lb tank to a 100 lb tank. The red type 1 ACME fitting will connect to one of your tanks, and the pigtail from the tank will…
view full answer...Yes, the #100019-24 pigtail can be used to connect your dual-cylinder 100 lb propane setup to the regulator on your RV. Since this hose does not have a back-check to contain a gas leak, you will need the #204120-MBS fitting that includes a…
view full answer...I looked up the hose and the regulator you currently have, and found that the GHA7 hose uses an ACME Nut connector to the LP tank and a 1/4 inch male inverted flare that connects to the 3/8 to 1/4 adapter used on the regulator. We offer the necessary…
view full answer...Filter Products (5)
Contact and Help
What our customers are saying:
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Randy
Watkinsville, GA