2018 Jayco Jay Flight SLX Travel Trailer RV Exterior Lighting

Features:

...side: 328-003-85 (sold separately) Dimensions: 9-1/2" long x 4" tall x 1-3/16" deep Diodes: 22 Wire length: 7" 1-Year limited warranty Surface-Mount Light Surface-mount trailer lights...

Features:

...one as a front or rear clearance light and one as a side marker light. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat...

Features:

...Oval brake, tail, and turn signal light Built-in reflex reflector White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate base and acrylic lens Surface...

Features:

...one as a front or rear clearance light and one as a side marker light. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat...

Features:

...strongest adhesive in the business, and 100% of the tape sticks to the surface you are applying to - there are no grid lines or pockets to fill with water and cause tape lift. The technologically advanced...

Features:

...for application and mount with peel-and-stick adhesive backing Hardwires to any 12-volt power source with 2-Wire pigtail Available snap-on connector allows you to easily attach 2 sections of LED light...

Features:

...strongest adhesive in the business, and 100% of the tape sticks to the surface you are applying to - there are no grid lines or pockets to fill with water and cause tape lift. The technologically advanced...

Features:

...power output No bulbs to replace - no brittle filaments Snap-on chrome housing Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount to trailer...

Features:

...lead length: 6" Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small...

Features:

...outdoor locations. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often...

Features:

...1-1/16" tall x 5/8" deep Distance between mounting holes (center on center): 2" Diodes: 1 10-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange or...

Features:

...polycarbonate housing and lens Clear lens with white LEDs Compatible with 12V DC systems Surface mounts to a flat surface with wedge base - hardware not included 2-Wire design - includes ground wire and lead wire...

Features:

...housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount with built-in flange - no panel cutout required 2-Wire design includes power lead and ground wire Specs: Dimensions...

Features:

...waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make...

Features:

...output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount to trailer with ABS plastic mounting bracket...

Features:

...bulbs to replace - no brittle filaments Durable die-cast aluminum housing and polycarbonate lens Clear lens with white LEDs Compatible with 12V DC systems Surface mount - hardware included 2-Wire pigtail...

Features:

...Light angles down to illuminate your trailer's license plate Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for...

Features:

...power output No bulbs to replace - no brittle filaments Snap-on chrome-plated polycarbonate housing Clear lens over white LEDs Surface mount with foam gasket - hardware included 2-Wire design includes...

Features:

...replace - no brittle filaments Durable polycarbonate lens Clear lens with white LEDs Compatible with 12V DC systems Surface mounts to a flat surface with wedge base - hardware not included 2-Wire design ...

Features:

...dark. Surface-Mount, Bolt-On Installation This surface-mount porch light is incredibly easy to install either as an upgrade or as a replacement of your existing light. To access the bolt holes, pop the...

Features:

...housing Snap-in lens allows for easy replacement Clear lens over white LEDs Mounts on surface of RV - hardware included 2-wire pigtail includes ground and lead wires Specs: Dimensions: 6" long x...

Features:

...Light angles down to illuminate your trailer's license plate Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for...

Features:

...filaments Polished chrome finish on polycarbonate housing Clear polycarbonate lens with white LEDs Sealed, waterproof construction has an IP67 rating Flat base for surface mounting 2-Wire pigtail - includes...

Features:

18" L x 2" W; alternating red/white reflector tape; 8 strips; DOT certified; rated for 7 years of use

Features:

...4-7/8" Diodes: 16 Power draw at 12V: 0.32 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount RV lights install using a flange or bracket with mounting holes. These lights lay flat against...

Features:

...over white LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 4" long x...

Features:

...mounting holes (center on center): 4-7/8" Diodes: 16 Power draw at 12V: 0.32 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount RV lights install using a flange or bracket with mounting...

Features:

...Light angles down to illuminate your trailer's license plate Black polycarbonate housing Clear lens Incandescent bulb is replaceable Mounts on surface of trailer with built-in ear-mount...

Features:

...Light angles down to illuminate your trailer's license plate Incandescent bulb is replacable Durable, chrome-plated steel housing Clear polycarbonate lens Surface mount to trailer...

Features:

...1-11/16" wide x 2-1/4" deep Distance between mounting holes (center on center): 3-1/2" Diodes: 2 Power draw at 12V: 0.01 amps 10-Year limited warranty Surface-Mount Light Surface-mount trailer...

Features:

...single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting...

Features:

...0.98 amps Wattage: 3.8 watts 1-Year limited warranty Surface-Mount RV Porch Light Surface-mount RV porch lights install using pre-drilled mounting holes in the housing. These lights lay flat against the...

Features:

...4-7/8" Diodes: 18 Power draw at 12V: 0.295 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount RV lights install using a flange or bracket with mounting holes. These lights lay flat against...

Features:

...Snap-in lens allows for easy replacement Clear lens over white LEDs Compatible with 12V DC systems Mounts on surface of RV - hardware included 2-Wire pigtail includes power lead and ground wire Specs...

Features:

...at 12V: 0.35 amps Limited 1-year warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and...

Features:

...Light angles down to illuminate your trailer's license plate Sonically sealed, polycarbonate housing and lens are waterproof Durable surface-mount technology (SMT) construction of LED...

Features:

...Trailer light angles down to illuminate your trailer's license plate Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration...

Features:

...mounting holes (center on center): 4-7/8" Diodes: 16 Power draw at 12V: 0.295 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount RV lights install using a flange or bracket with mounting...

Features:

...Compatible with 12V DC systems Stud mount to trailer - hardware not included Single wire design grounds through mounting hardware Specs: Dimensions: 4" long x 1-3/4" wide x 2-5/16" thick...

Features:

...Distance between mounting holes (center on center): 4-3/4" Lumen output: 4,000 Diodes: 4 Wire length: 6" 1-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a...

Features:

...Dimensions: 8-5/8" long x 3-1/4" tall x 1-15/16" deep Distance between mounting holes (center on center): 3-1/2" Diodes: 1 10-Year limited warranty Surface-Mount Light Surface-mount trailer...

Features:

...housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount with built-in flange - no cutout required Adhesive back allows for easy application Accepts industry standard 2-prong...

Features:

...lumens: 550 lumens Diodes: 9 Power draw at 12V: 0.375 amps IP rating: IP67 Lifetime warranty on LEDs Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes...

Features:

...white LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 4" long x...

Features:

...replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over white LEDs Surface mount - hardware not included 2-Wire design - includes lead wire for power and ground wire Specs...

Features:

...center): 3-3/4" Lumen output: 4,000 Diodes: 4 Wire length: 6" 1-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These...

Features:

21' L x 2" wide; alternating red/white reflector tape; DOT certified; rated for 7 years of use

Features:

...Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and mounting hardware is used to secure the light to the...

Features:

...systems Mounts on surface of trailer - hardware not included 2-Wire pigtail includes power lead and ground wire Specs: Dimensions: 2-5/16" long x 2-5/16" tall x 7/16" deep Light type: warm...

Features:

...Low-profile, oval utility light provides bright white light for your application Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and...

Features:

...Durable polycarbonate lens and housing Clear lens over incandescent bulbs Compatible with 12V DC systems Mounts on surface of trailer with bracket (154-09K - sold separately) Accepts industry standard...

Features:

...the light running at peak efficiency position it in direct sunlight during daylight hours. The lower section of the light contains 168 surface-mount LEDs that produce a bright white light that is ideal...

Features:

...Clear, rectangular RV light functions as a porch and utility light Corrosion resistant Replaceable lens and bulb Toggle-button on/off switch Tested and approved by UL and CSA Surface mounts...

Features:

...lens Surface mounts with mounting bracket (sold separately) Mounts on 3" centers Accepts industry standard 1-prong or 2-prong plug (sold separately) Specs: Overall dimensions: 4" long x...

Features:

...Diodes: 1 Power draw at 12.8 volts: 0.054 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat...

Features:

...Surface mounts to trailer - hardware not included 2-Wire design with 0.156 male bullets includes power lead and ground wire Specs: Overall dimensions: 2-1/2" long x 1-1/16" tall x 11/16"...

Features:

...center on center): 3-1/4" Bulb type: 168 Power draw at 12V: 0.35 amps Limited 1-year warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes...

Features:

...lights on your trailer - one as a front or rear clearance light and one as a side marker light. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These...

Features:

4" x 1-1/4" Rectangle. Red and amber trailer reflectors meet FMVSS requirements for reflex reflectors. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

...Trailer reflector increases visibility of vehicle at night and in low lighting Chrome bezel provides a finished look Surface mount to trailer with adhesive backing Meets FMVSS 108 standards...

Features:

...for easy replacement Clear lens over white LEDs Mounts on surface of RV - hardware included 2-wire pigtail includes ground and lead wires Specs: Dimensions: 9-3/4" long x 3-1/2" tall x...

Features:

...outdoor kitchen so you can see in the dark. Surface-Mount, Bolt-On Installation This surface-mount porch light is incredibly easy to install either as an upgrade or as a replacement of your existing light...

Features:

...the USA Specs: Dimensions: 5-3/4" long x 3-1/8" tall x 1-1/2" deep Diodes: 9 Wire length: 4" 1-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a...

Features:

...won't have to worry about replacing bulbs that have brittle filaments. And because LEDs draw minimal power, the light won't drain your battery or overload your circuits. Surface-Mount, Bolt-On...

Features:

...DC Power draw: 0.98 amps Wattage: 3.8 watts 1-Year limited warranty Surface-Mount RV Porch Light Surface-mount RV porch lights install using pre-drilled mounting holes in the housing. These lights lay...

Features:

...Amber lens over white LEDs Mounts on surface of RV - hardware included 2-wire pigtail includes ground and lead wires Specs: Dimensions: 6" long x 3-1/2" tall x 2" deep Distance between...

Features:

...LED light strip attaches to awnings to provide sideways light Warm white light with light starkness Compatible with Thule mounting rail TH301644 Can be used both when the awning is opened...

Features:

...easily replaced Durable ABS plastic base Amber snap-on lens over incandescent bulb Compatible with 12V DC electrical systems Surface mount on trailer - hardware not included Single wire design grounds...

Features:

...Reference Light will work as an exact replacement for: Uni Bond # DL2020 Grote # 60151 Peterson # M434 Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with...

Features:

...sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution...

Features:

...Trailer reflector increases visibility of vehicle at night and in low lighting Chrome bezel provides a finished look Surface mount to trailer with adhesive backing Meets FMVSS 108 standards...

Features:

...Flexible LED strip provides light inside or outside your RV Warm white light with light starkness Compatible with Thule mounting rail TH306777 60-70 power LEDs per 3' Power consumption...

Features:

...Red Reflector 1" x 12" Adhesive backing 2 Mount holes measure 7-7/8" apart Meets NHTSA ruling...

Features:

...wide x 2" deep Light output: 357 lumens Diodes: 21 Wattage: 3.8 watts Power draw at 12V: 0.32 amps Wire length: 7" 1-Year limited warranty Surface-Mount RV Porch Light Surface-mount RV porch...

Features:

...Compatible with 12V DC systems Surface mount to trailer above license plate - hardware not included 2-Wire design with 0.180 bullets DOT compliant Made in the USA Specs: Dimensions: 3" long x 1-1/16"...

Features:

...lead length: 6" Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small...

Features:

...long x 4-11/16" wide x 2" deep Light output: 357 lumens Diodes: 21 Wattage: 3.8 watts Power draw at 12V: 0.32 amps Wire length: 7" 1-Year limited warranty Surface-Mount RV Porch Light...

Features:

...like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the internal components. Surface-Mount Light...

Features:

18" L x 2" W; alternating red/white reflector tape; 4 strips; DOT certified; rated for 7 years of use

Features:

...The bulb is protected in the housing and can be easily replaced. The base surface mounts on 2" centers. The light contains a single lead wire for power and is grounded through the mounting hardware...

Features:

...Amber trailer reflector meets FMVSS requirements for reflex reflector Durable acrylic construction Self adhesive backing allows for easy stick-on application Screw holes allow for surface...

Features:

...50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing White LEDs with frosted lens Mounts on surface...

Features:

...mounting holes (center to center): 3" Power draw at 12V: 0.35 amps Wire lead length: 7" Voltage: 14 volts Wattage: 4.9 watts Surface-Mount Light Surface-mount trailer lights install using a flange...

Features:

...polycarbonate lens and gray housing Surface mount with ear-mount base - hardware not included Accepts industry standard 2-prong plug (sold separately) Specs: Qty: 1 license plate light Overall dimensions...

Features:

...Amber trailer reflector meets FMVSS requirements for reflex reflector when properly mounted Durable acrylic construction Adhesive backing allows for easy stick-on application Specs...

Features:

...lens Surface mounts to trailer - hardware not included 2-Wire design with 0.180 female barrels includes power lead and ground wire Specs: Overall dimensions: 2-1/2" long x 1-1/16" tall x...

Features:

...between mounting holes (center on center): 1-3/4" Bulb type: 168 Power draw at 12V: 0.35 amps Limited 1-year warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket...

Features:

...deep Light output: 1221 lumens Diodes: 39 Wire length: 5" 1-Year limited warranty Surface-Mount Light Surface-mount RV lights install using pre-drilled mounting holes in the housing. These lights...

Features:

...plastic housing resists corrosion Snap-on clear lens covers incandescent bulb Compatible with 12V DC systems Surface mount installation - hardware not included 2-Wire design includes power lead and ground...

Features:

...systems Surface mount to trailer with mounting bracket - hardware not included 2-Wire design with power and ground wire DOT compliant Specs: Dimensions: 8-5/8" Long x 3-1/4" wide x 2-5/16"...

Features:

...Durable ABS housing and snap-on lens Red lens over incandescent bulbs Compatible with 12V DC system Surface mount to trailer - hardware not included 2-Wire design includes power lead and ground wire DOT...

Features:

...Red trailer reflector meets FMVSS requirements for reflex reflector Durable acrylic construction Self adhesive backing allows for easy stick-on application Screw holes allow for surface...

Features:

...Microprisms per square inch for superior reflective power Durable construction is fully sealed and won't rip or tear Surface mount to trailer with pressure-sensitive adhesive backing Works on curved and...

Features:

...easily replaced Durable ABS plastic base Red snap-on lens over incandescent bulb Compatible with 12V DC electrical systems Surface mount on trailer - hardware not included Single wire design grounds...

Features:

...over incandescent bulb Compatible with 12V DC systems Stud mount to trailer with included studs Single wire design grounds through mounting hardware DOT compliant Specs: Dimensions: 2-5/8" wide x...

Features:

3-3/16" x 1-7/16" Rectangle. Red trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

...times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing Clear lens Requires mounting bracket or grommet (sold...

Features:

...lens covers incandescent bulb Compatible with 12V DC systems Surface mount installation - hardware not included 2-Wire design includes power lead and ground wire UL and CSA certified Specs: Dimensions...

Features:

...and housing Clear lens over incandescent bulb Compatible with 12V DC systems Multiple mounting options Flush mount with grommet (A91GB - sold separately) Surface mount with bracket (A91BB - sold...

Features:

...Round red trailer reflector enhances visibility on the road Durable acrylic construction Surface mount with a single screw (not included) Meets FMVSS "A" when properly installed...

Features:

...stainless steel base Clear snap-on lens over incandescent bulb Compatible with 12V DC systems Stud mount to trailer with included stud Single wire design grounds through mounting hardware Specs: Dimensions...

Features:

...Low-profile reflector increases visibility of vehicle at night and in low lighting Durable aluminum housing is rustproof Surface mount to trailer - hardware not included Made in the USA...

Features:

3-3/16" x 1-7/16" Rectangle. Amber trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

...housing Snap-in lens allows for easy replacement Amber lens with white LEDs Mounts on surface of trailer - hardware included 2-wire pigtail includes ground and lead wires Specs: Dimensions: 6" long x...

Features:

...plastic housing resists corrosion Snap-on amber lens covers incandescent bulb Compatible with 12V DC systems Surface mount installation - hardware not included 2-Wire design includes power lead and ground...

Features:

...replaced Durable chrome-plated brass construction Clear lens over incandescent bulb Compatible with 12V DC systems Snap-in mounting - light easily clips into 1-1/4" diameter mounting hole Single wire...

Features:

...lens covers incandescent bulb Compatible with 12V DC systems Surface mount installation - hardware not included 2-Wire design includes power lead and ground wire UL and CSA certified Specs: Dimensions...

Features:

...easily replaced Durable polycarbonate housing and lens Amber snap-on lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer - hardware not included Single wire design grounds...

Features:

...Gray-coated license-plate light Surface mount Mounting hardware and adhesive not included Single-wire design Replaceable bulb Uses replaceable bulb #168 2-5/8" Long x 1-5/8"...

Features:

...Round red trailer reflector enhances visibility on the road Durable acrylic construction Surface mounts with adhesive backing Meets FMVSS "A" when properly applied Specs...

Features:

...the light running at peak efficiency position it in direct sunlight during daylight hours. The lower section of the light contains 84 surface-mount LEDs that produce a bright white light that is ideal...

Features:

...9-3/4" tall x 3-1/2" wide x 2-1/4" deep Power draw: 0.87 amps at 12 volts Installation: surface mount 3-Year limited warranty...

Features:

...easily replaced Durable polycarbonate housing and lens Red snap-on lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer - hardware not included Single wire design grounds...

Features:

...marker light. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often...

Features:

...Round amber trailer reflector enhances visibility on the road Durable acrylic construction Surface mounts with adhesive backing Meets FMVSS "A" when properly applied Specs...

Features:

...1-1/2" deep Diodes: 39 Wire length: 5" 1-Year limited warranty Surface-Mount RV Dome Light Surface-mount RV dome lights install using pre-drilled mounting holes in the housing. These lights lay flat...

Features:

...is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for...

Features:

...Microprisms per square inch for superior reflective power Surface mount to trailer with pressure-sensitive adhesive backing Works on curved and flat surfaces DOT compliant Made in the USA Dimensions: 2-7/8"...

Features:

...Durable ABS housing and snap-on lens Amber lens over incandescent bulbs Compatible with 12V DC system Surface mount to trailer - hardware not included 2-Wire design includes power lead and ground wire DOT...

Features:

...Round amber trailer reflector enhances visibility on the road Durable acrylic construction Surface mount with a single screw (not included) Meets FMVSS "A" when properly installed...

Features:

...Low-profile reflector increases visibility of vehicle at night and in low lighting Durable aluminum housing is rustproof Surface mount to trailer - hardware not included Made in the USA...

Features:

...marker light. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often...

Features:

3-3/16" Diameter. Yellow trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Meets FMVSS requirements.

Features:

...Light angles down to illuminate your trailer's license plate Sonically sealed, chrome polycarbonate housing and lens are waterproof Durable surface-mount technology (SMT) construction...

Features:

...Round amber trailer reflector enhances visibility on the road Durable acrylic construction Surface mount with a single screw (not included) Meets FMVSS "A" when properly installed...

Features:

...Round red trailer reflector enhances visibility on the road Durable acrylic construction Surface mount with a single screw (not included) Meets FMVSS "A" when properly installed...

Features:

...Microprisms per square inch for superior reflective power Surface mount to trailer with pressure-sensitive adhesive backing Works on curved and flat surfaces DOT compliant Made in the USA Dimensions: 2-7/8"...

Features:

...housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount trailer...

Features:

...sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution...

Features:

...plastic housing resists corrosion Snap-on clear lens covers incandescent bulb Compatible with 12V DC systems Surface mount installation - hardware not included 2-Wire design includes power lead and ground...

Features:

...2-3/16" Diameter, round reflector Acrylic lens Surface mount Self-adhesive Red lens...

Features:

...LEDs 2-wire pigtail - includes power lead and ground wire Mounts on surface of trailer - hardware not included Specs: Dimensions: 12-3/8" long x 1" tall x 7/16" thick Distance between...

Features:

...Clear lens over white LEDs Mounts on surface of RV - hardware included 2-wire pigtail includes ground and lead wires Specs: Dimensions: 6" long x 3-1/2" tall x 2" deep Distance between...

Features:

...Microprisms per square inch for superior reflective power Durable construction is fully sealed and won't rip or tear Surface mount to trailer with pressure-sensitive adhesive backing Works on curved and...

Features:

...or curved surfaces Made in the USA Specs: Dimensions: 150' Long x 2" wide Candlepower: 1,000 Limited lifetime warranty...

Features:

...aluminum housing is corrosion resistant Clear polycarbonate lens is less likely to shatter than a glass lens Surface mount - hardware not included Mounts directly to trailer surface on 2-15/16" centers...