Thickness of Mounting Bracket With Buyers Products 5/8 Inch Forged D-Ring

Question

Question:

How thick is the Weld-On mounting bracket? My MIG Welder will handle 1/4 thick metal.

asked by: David S

0

Expert Reply:

The thickness of the mounting bracket is 7/16" for the Buyers Products 5/8" Forged D-Ring With Weld-On Mounting Bracket # 337B40.

expert reply by: Kyle S

0

Mounting Bracket Thickness of Buyers Products 5/8" Forged D-Ring
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 3

You will get signifcantly less clearance issues if you go with the EcoHitch Hidden Trailer Hitch item #306-X7372 over the etrailer Hitch item #e98855. I have attached some pictures below that will better show this but the main thing you are getting…

view full answer...

Answer 4

Hi Taylor, Welcome to the bike rack world! A little movement is normal with most hitch mounted bike racks, but the Hollywood Destination 2 part #HLY94FR is designed with an anti rattle hitch pin, so it shouldn't have excessive side to side play…

view full answer...

Answer 5

Wiring connections for the Electric Over Hydraulic Brake Actuator are as follows. Yellow - Cold side of breakaway switch, The wire that goes hot when a breakaway occurs. Black - Positive connection on breakaway switch, The wire that charges the…

view full answer...

Answer 6

The appropriate torque spec for any application will vary depending on the construction of the wheel as well as on the stud size. I suggest checking the wheels you're using to see if their manufacturer has a suggested torque rating. Steel trailer…

view full answer...

Answer 7

A set of four of the load range C Provider ST205/75R14 Radial Trailer Tire #TR20514 will absolutely be enough capacity for a 5,000 lb dual axle boat trailer. These tires have a 1,760 lb capacity per tire so four of them would be plenty to handle the…

view full answer...

Answer 8

Hey Tim, I have attached a chart that shows all of the recommended torque specs for trailer wheels. I am not sure of the exact stud size your 2017 Forest River Thunderbolt uses, but it is probably either 1/2" or 9/16". If they are 1/2"…

view full answer...

Answer 9

Hey Joe. The Buyers Products 15 Ton Combination Pintle Hitch w/ 2-5/16" Ball item #BP38FR does not come with the mounting hardware. You'll need the Buyers Products Pintle/Combination Hitch Mounting Kit item #3378520 for the bolts, washers,…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

We have 72 inch axles that are 2k rated with idler hubs as a single part number but none that have the hub/drums on them so you'd need to order an axle with spindles only in that configuration and then add the hub/drums and assemblies like with…

view full answer...

Thickness of Mounting Bracket With Buyers Products 5/8 Inch Forged D-Ring

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching