Can Snap-Loc E-Track Tie-Down Strap Work With Erickson Horizontal E-Track

Updated 11/22/2016 | Published 11/21/2016

Products Featured in This Question

4-Slot Horizontal E Track - Zinc Plated Steel - Qty 1

(61)

$8.64

Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1

(1207)

$38.89

etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 2

(261)

$18.31

Erickson Roller Idler for E Track - 3,300 lbs

(98)

$18.91

E-Track Plastic End Cap

(129)

$8.80

Snap-Loc E Track Tie-Down Strap w/ Ratchet and Soft Tie-Loop - 2" x 8' - 1,467 lbs

(140)

$17.49

Question:

I like the Snap-Loc E-Track Tie-Down Strap w/ Ratchet and Soft Tie-Loop - 2inch x 8foot - 1,467 lbs code SLLS28RER. Can it be used with Erickson Products? Specifically their Erickson Horizontal E-Track - Zinc Coated Steel - 6,000 lbs - 5foot Long code E19148 and Erickson Roller Idler for E-Track - 3,300 lbs code EM09144 I am looking to used 4 straps over 4 tires to hold down my Jeep that weighs 4,880 lbs scale weighed. Seeing commercial drivers see pic use this method it will make it easier on me not to have to climb under my Jeep due to my handicap.

asked by: Joseph M

Helpful Expert Reply:

The Snap-Loc E-Track Tie-Down Strap, part # SLLS28RER will work great with the E-Track systems like part # E19148 and part # EM09144.

You will want to make sure you have the E-track attached to the floor really secure. To make sure it is secured properly you may want to use the E-Track Backing plate, part # e96RR. This attaches on the opposite side of the mounting surface.

We also offer plastic endcap, part # ET8730 for the E-Track to protect tires or anything that travels over the edge of the track system.

You will need to make sure you stay within the weight capacity of the lowest rated component.