Truck Bed Mats Specs:
Features:
This bed mat protects your load and your truck bed by preventing cargo from shifting as you drive. Made of heavyweight Nyracord, the mat is extra thick and will not crack, rust, or break. Mat is custom fit for your vehicle.
More Information >Truck Bed Mats Specs:
Features:
Use this universal-fit, heavyweight tailgate mat with your DeeZee truck-bed mat to extend bump-and-scratch protection to your vehicle's tailgate. The thick rubber mat will not crack or break - even in extreme temperatures.
Tech Tip:
Mat may require trimming as it is a universal design for this bed size, not a custom fit.
More Information >Videos
for Truck Bed Mats
Help Articles
for Truck Bed Mats
Expert Answers
for Truck Bed Mats
Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…
view full answer...Hello John, I have listed the different Torklift tie-downs, along with their weights, for your 2024 Ford F-350 below based on you looking at the #TL87DR. Both are designed to fit the 8' bed with a factory hitch or Torklift SuperHitch Magnum. The…
view full answer...Yes, it will! The Hellwig Adjustable Big Wig Rear Anti-Sway Bar item #HE96XR is indeed compatible with air bags when installed on your 2024 GMC Sierra 3500. This is the right bar for your stock height truck. I would stay away from the Air Lift air…
view full answer...Great question, Kevin. The Onboard Scale system on your 2024 Ford F-350 Super Duty works by essentially measuring how low the bed is sitting and it gives an estimated weight based off of that. If you added a suspension enhancement then that would…
view full answer...Yes, it is! You're going to need to cut out more than just the holes though when installing the DeeZee Custom-Fit Truck Bed Mat item #DZ28GJ. The mat is 3/8" thick so you'll have to cut out more of an H pattern or your 5th wheel hitch…
view full answer...Hey Jim, thanks for reaching out! The DeeZee Custom-Fit Truck Bed Mat #DZ28GJ will fit your 2024 Ram 3500 as long as it's an 8' bed, the TorkLift Tie Downs #TL75FV will fit the truck as well, and then the TorkLift Locking FastGun Turnbuckles…
view full answer...Hey Joshua, with a utility knife the WeatherTech TechLiner part #WT52UK will not be difficult to cut to open up to your 5th wheel prep pucks. What hitch do you have?
view full answer...Hi Scott; the DeeZee Custom-Fit Truck Bed Mat #DZ88GJ is specifically designed to fit the 6-1/2' bed on your 2025 Ram 1500. No trimming or any kind of alteration will be required to install it in your truck bed.
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
view full answer...Hello Al, Great question. The Black Armour Heavy-Duty Custom Truck Bed Mat - Rubber - Black #BA56AR is custom cut for the 2006 Toyota Tacoma with the 6 foot bed. You will have access to the tie down anchors that you already have in the bed of the…
view full answer...Hey Dave, we can definitely help but we don't have any kits that work as both trailer wiring and tow bar lighting for your 2024 Ford Bronco so you'll need to install both kits separately. But they will work fine together. For tow bar lighting…
view full answer...Hello Drew, I'm glad that you wrote in. For your 2015 GMC Sierra 1500 you want part #RED26CR, this part number is the brake controller and the vehicle specific pigtail for you Sierra 1500. The #RED24FR you were looking is just the brake…
view full answer...Filter Products (2)