1981 Cadillac Eldorado Air Filter

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hello Ted, Both the #BAK62VR and #BAK34ZR are a fit for the 2024 GMC Sierra 1500, but it comes down to the bed of the Sierra. The #BAK62VR is designed for the Sierra WITHOUT the CarbonPro bed, and the #BAK34ZR is designed for the Sierra WITH the…

Hey Randy! The etrailer Anti-Rattle Hitch Collar item #e38FV does not come in 2-1/2" but I can still make your F-350 happy. A comparable option for a 2-1/2" receiver is the B&W Anti-Rattle Clamp item #BW65FR. This also connects to the…

I have attached a drawing from the installation instructions for the rail kit part #C16430-204 you can check out. As you can see in the attached drawing I noted the carriage bolts and where they are located on the rails when installing. Please note…

Hello Gary, thanks for reaching out. The etrailer Anti-Rattle Hitch Collar #e38FV is only for a 2" receiver. It will not work with the 2-1/2" hitches. We do hope to make a version for a 2-1/2" hitch in the future, but that is a good…

Hello Aaron. I have the perfect solution for you, the Gen-Y Hitch Gooseneck Trailer Hitch for GM OEM Puck Systems - 5" Offset - 25,000 lbs #GY55XR. This will bring the ball forward by 5" and should line you up over the axle. After you try…

The correct replacement for an Atwood Water Heater GC6AA-9E is the Dometic RV Water Heater part #DMC74FR. This is a 6 gallon water heater that works with both gas and electric just like the one you have so it will be an exact match.

Hello Bradin, I was able to get out to the warehouse to get the mounting hole dimensions that you requested, I appreciate the opportunity for a good leg stretch. all of my measurements are from center hole to center hole. The Draw-Tite Trailer Hitch…

Hi Bill; I'm not surprised the #T53MR gives you a rough ride since it is the severe service kit. Timbren SES isn't overly forgiving to begin with, and this particular design is for constant loads like a slide-in camper. I would recommend the…

Hi Dave; yes, the Curt #C94WR also fits the 2025 Hyundai Tucson Hybrid. You can actually see it on a hybrid model in the picture I added to this page. The hitch has the 2" receiver you need and a max tongue weight of 525 lbs to handle your bike…

Hey Bret! We don't sell the mounting bracket for the Primus IQ item #TK90160 anymore. It's part number 6927 so you should be able to find it online. As far as the relays go, the 7- and 4-Pole Trailer Connector item #HM40975 does not include…