bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Oval
  5. LED Light
  6. Red
Optronics Fleet LED Trailer Tail Lights w/ Grommets - Stop,Turn,Tail - Submersible - Oval - Qty 2
Optronics

Optronics Fleet LED Trailer Tail Lights w/ Grommets - Stop,Turn,Tail - Submersible - Oval - Qty 2

Part Number: TLL12RK
In Stock
$36.53
Retail:$66.42
You Save: 45%
Trailer Lights
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. Accepts included standard 3-prong plugs. Great Prices for the best trailer lights from Optronics. Optronics Fleet LED Trailer Tail Lights w/ Grommets - Stop,Turn,Tail - Submersible - Oval - Qty 2 part number TLL12RK can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (486)
  • Q & A (0)
  • Photos

Optronics Trailer Lights - TLL12RK

Features:

  • Oval LED trailer tail lights serves 3 functions when properly mounted
    • Brake light
    • Tail Light
    • Turn Signal
  • Sonically sealed, waterproof housing and lens unit is submersible
  • Durable surface-mount technology (SMT) construction of LED circuit board
    • Better withstands shock and vibration
    • Allows for improved heat distribution
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Red lens over white LEDs
  • Polycarbonate lens and housing
  • Recessed mount with included grommets
  • Includes industry-standard 3-prong plugs for connections


Specs:

  • Quantity: 2 trailer tail lights
  • Overall dimensions: 7-9/16" long x 3-5/16" tall x 1-3/4" thick
    • Light face: 6-1/2" long x 2-5/16" tall
  • Diodes: 12
    • 6 LEDs per light
  • Powerdraw at 12.8V:
    • Stop/turn: 0.161 amps
    • Tail: 0.007 amps
  • Lifetime warranty on LEDs


Optronics STL12 Series Fleet Count 6 Inch Oval Sealed LED Light Diagram

Sonically Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.


Recessed-Mount Light

Recessed mount light

Recessed-mount trailer lights install underneath a housing or a grommet (A70GB). These lights will extend into the mounting surface and require that a hole be cut into your trailer.



TLL12RK Optronics Fleet Count Combination LED Trailer Tail Light Kit - Waterproof - Oval - Red Lens - Qty 2




California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.7

486 reviews
7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. Accepts included standard 3-prong plugs.

by:

Plug and play, so installation was very quick and easy. They work great so far, but I just installed them, so time will tell. They are LED's, so I would expect them last a long time.

Robert profile picture

Robert

3/17/2026

Working Great....... Great Price.......... Easy plug and play installation.........



by:

The order arrived very quickly and within 30-minutes they were installed. Perfect fit, even the same connector configuration as my original lights.

Michael profile picture

Michael

10/9/2025

As expected, these lights are still performing well. There has been zero issues with them. In the future I will use this supplier for my trailer parts.

Andrew N. profile picture
Etrailer Expert

Andrew N.

10/9/2025

@Michael That's great to hear Michael! I have the same branded tail lights on my car hauler trailer, and they have given me issues. I'm glad I upgraded to LED.


by:

Everything I have used made by Optronics has been excellent. Trailer lights, RV, etc have been excellent. As always Etrailer is the best! Thanks!



by:

Plug and play on my trailer. Easier than changing a bulb.

Mike L. profile picture
Etrailer Expert

Mike L.

9/10/2025

You gotta love that!



by:

This was a perfect replacement for my old incandescent optonics lights fitted to my 2005 Mastercraft trailer. Great product works out of the box



by:

Very nice lights. I had a tail light out and needed to replace the lamp. These LED tail lights made a very nice upgrade.

Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

4/10/2025

Sounds like these lights will keep you easily noticed at night :)



by:

It was not delivered. How was it shipp ed?

Mike L. profile picture
Etrailer Expert

Mike L.

2/12/2026

Let me look into that for you Daniel.



by:

Arrived quickly and simple installation.



by:

I used these on my plow truck's new flatbed. I liked that it included the mounting grommets and wiring pig tails. They are working terrific, and look stylish.



by:

the lights are not the right ones for my application



by:

Delivery was fast, and the lights were installed yesterday



by:

I had to upgrade my previous LED lights that i purchased years ago from here as they were all blown out minus 1 bulb on each side. These lights fit right into the preious bracket with the previous gasket and they light up well.



by:

These LED lights get the job done. They're easy to install, and after a few years of wear and tear out on the road, inexpensive enough to replace. They're bright and let everyone behind you know that you're braking and turning. Can see from long distance away.



by:

EXCELLENT customer. The items I ordered were exactly what I need. I’m very grateful.



by:

Plug and Play Works Awesome!



by:

These were an exact fit to replace my UV damaged units on my Featherlite cargo trailer. Excellent quality and exactly as described. Well packaged and reasonably priced.



by:

Plugs did not fit connector without modification, spreading with a screw driver tip.



by:

Sturdy, bright lights. A great addition to my hitch-mount bike rack.



by:

Light fixture worked great. The gasket holding the light in did not fit tight enough,



by:

The lights are bright and they’re easy to install



by:

Lights working fine on my Ranger bass boat trailer.



by:

Perfect fit and the new LED looks great on my trailer.



by:

I got what I ordered and in the time frame that was promised. I'll definitely be using this company for all my trailer needs.



by:

I'll give it 5 stars if it wasn't for the long time before shipping...very happy with product, installed four in my horse trailer and make a huge difference. Also installed 6-1/2" Oval LED Trailer Utility Light, Flange Mount, 10 Super Diode - Clear - BUL78CB in back of trailer for safe night horse loading/unloading. see before and after pics



by:

Ordering was easy, couldn't have been any nicer and was very knowledgeable over the phone. Phone received it in 3 days which was a day faster than they said. Will definitely be using them from now on.


25
486
Show More Reviews

See what our Experts say about this Optronics Trailer Lights

  • Replacement Tail Lights for a 2008 Featherlite 4926 Car Hauler Trailer
    Hey Craig, thanks for reaching out! I believe the Optronics Fleet LED Trailer Tail Lights w/ Grommets # TLL12RK will work as replacements for your 2008 Featherlite 4926 trailer, but you'll need to confirm this on your end. These lights carry the stop/tail/turn functions and measure 7-9/16" long x 3-5/16" tall x 1-3/4" thick overall. If this matches what you have then you'll be good to go with this kit! If this doesn't match what you have please let me know what dimensions and shape you...
    view full answer...
  • Trailer Tail Light Replacement Recommendation for TecNiq 16P2S2T2T60
    I believe the tail lights you have are the TecNiq T60 lights which are industry standard 6" oval recessed lights. To replace those you can use the Optronics Fleet LED Trailer Tail Lights # TLL12RK. If your lights look different than this please send in a picture with some dimensions so I can help you find the correct replacements.
    view full answer...
    Image 1 for
  • Recommended Replacement Light for a 2007 MasterCraft Boat Trailer
    Hey Kent, it looks like the closest you can use for a replacement that we have is the Optronics Fleet LED Trailer Tail Lights w/ Grommets # TLL12RK. These lights measure 7-9/16" long x 3-5/16" tall x 1-3/4" thick, has the three prong connector like your current light, and can be separated from its PVC housing. We also do have jus the three prong plug you're looking for # 431-491.
    view full answer...
  • Will Adding Optronics LED Backup Light to Kayak Trailer Require Rewiring the Trailer
    It sounds like you are wanting to replace your incandescent backup lights on your kayak trailer with LED lights like the Optronics LED Backup Light for Trucks or Trailers # BUL52CB. If that is the case, all you will need to do is replace the current lights with the LED lights. The # BUL52CB accept the industry standard 2-prong plug like the 2-Wire Pigtail for Optronics Backup and Utility Trailer Lights - 2-Prong PL-3 Plug # A45CB. If you do not have existing lights, then you will have...
    view full answer...
  • Determining Replacement Bearings for a 2008 Wolverine 24TACU Trailer
    Hey Cameron, unfortunately all the information the VIN gives me is the year make and model of your trailer so nothing actually pertaining to bearings. In order to get you the correct replacement bearings, you're going to need to pop your hubs off and remove the existing bearings. From here, there should be a set of numbers stamped to the top of the bearing - this is what I'm going to need. If you can come back with that info handy, I'd be more than happy to help you out.
    view full answer...
  • Hole Size Dimension for Optronics LED Tail Light with Grommet
    The light dimensions of the Optronics LED # TLL12RK are 7-9/16" long x 2-3/4" tall x 1-3/4" deep and the hole size needed is 6.75" by 2.5 inches. I confirmed this with my contact at the manufacturer and I've attached a template they sent to assist.
    view full answer...
    Image 1 for
  • Replacement LED Trailer Lights and Wiring Connectors for Fresh Water and Salt Water Use
    I'd be more than happy to help you out, Herb! A common light kit for boat trailers is the Optronics Fleet LED Trailer Tail Lights w/ Grommets # TLL12RK which measure 6-1/2" long x 2-5/16" tall for the light face and are submersible. It's best to make your wiring connections with something like the Deka Heat Shrink Butt Connector Kit # DW05744-10 because they seal up the connections better than standard butt connectors. If these lights don't match the dimensions of what you currently have...
    view full answer...
  • How to Determine Correct Replacement Tail Light Lens for Trailer
    While I can help you determine exactly how to figure out what replacement lens you need, trailer manufacturers don't manufacture a list of replacement parts for models of trailers, and SAE actually stands for "Society of Engineers" and isn't a part number for the light, it just means it has passed certain standards. Having said all that, in order to determine the correct replacement lens, a part number (which may be on the light itself) is needed, or you may be able measure to determine...
    view full answer...
  • What Do the Black and Red Wires on Trailer Tail Lights Connect to?
    Hey Tim, thanks for reaching out! You'll need to match the wires per function, which it seems you've found out. I'm not sure what function your yellow/green wire carries, but typically the black wire is for the tail/running lights and the red is for the stop/turn signal. We see this with the Optronics Light Kit # # TLL12RK. The nice thing about trailer lights is that if you end up being wrong, you can simply swap the wires around and be good to go. I recommend testing the functions while...
    view full answer...
  • LED Tail Light Replacements for Jayco Eagle Pop-Up Camper
    We do carry a large selection of LED tail lights and we will undoubtedly have ones that will work for your 2000 Jayco Eagle M-12 UDK pop-up camper, though we do not have a parts list available for specific trailers. The best way for you to find new LED lights would be to measure your current lights and find a close match. For example, tail lights # TLL12RK are 7-9/16" long x 2-3/4" tall x 3/4" deep and recess mounted, while # TLL9RK are 5-1/16" long x 4-9/16" tall x 2-5/8" deep and surface...
    view full answer...
  • How to Determine Wire Functions on Trailer with Mixed Wire Colors
    Hey Jerica, thanks for reaching out! It sounds like someone else has done some wiring on your camper as well and used none-standard wire colors for upgrades/repairs. The best way to figure out what function each of those wires carry is to apply 12V power to each one individually to see what it activates - aside from that there isn't a way to verify what is what unless that really is OEM wiring and the manufacture has a diagram listing those wire colors. As for your tail lights, it sounds...
    view full answer...
  • PVC Grommet Thickness for the Optronics Fleet LED Trailer Tail Lights
    Nick, the PVC Grommet # a70gb is 1 1/8" thick so you could use up to an 1 1/8" thick metal.
    view full answer...
  • Recommended Replacement Recessed Mount Oval Tail Lights for Box Trailer
    The Optronics Fleet LED Trailer Tail Lights part # TLL12RK which install inside a 6-11/16" x 2-5/8" opening is the closest option we have for you and it comes with the needed grommet and pigtail for installation.
    view full answer...
  • Replacement 6-1/2" Oval Lights for a Heartland Utility Trailer
    Hey Adam, thanks for reaching out! For surface mount lights you need the Optronics LED Trailer Tail Light # STL78RB, but if by flush mount you mean recessed, then you need the Optronics Fleet LED Trailer Tail Lights w/ Grommets # TLL12RK. Both kits come with 6-1/2" oval tail lights. I'm not sure what exact style came on your Heartland utility trailer, but either of these will be the same size as your 6-1/2" lights. Please let me know if you have any questions about these!
    view full answer...
  • Will Optronics Fleet LED Trailer Tail Lights Fit 2002 Doolittle Cargo Trailer
    Hi Gene; we don't have a way of knowing the exact lights on your 2002 Doolittle Cargo Trailer. You will need to measure and compare to the Optronics Fleet LED Trailer Tail Lights # TLL12RK to see if they're a good fit. These lights measure 7-9/16" long x 3-5/16" tall x 1-3/4" thick. If that matches what you have they will make a good replacement. If you have different dimensions let me know in the comments below.
    view full answer...
  • LED Trailer Taillight Replacement for Peterson 421KRUS
    Hey Westley, we carry the Peterson part # 421KRUS which is a pretty standard size trailer taillight so for a kit that will replace that in LED we have the part # TLL12RK.
    view full answer...
  • Recommended Replacement Taillights for a 2020 Showstar Cimarron Trailer
    Hey Nancy, I took a look at your 2020 Showstar Cimarron trailer and it does look like yes the Optronics Fleet LED Trailer Tail Lights w/ Grommets # TLL12RK will work fine to replace your old tail lights. The only thing you're going to want to verify is the size of those original lights. These new ones measure 7 9/16" long, 3 5/16" tall, and are 1 3/4" thick. So if you compare that to what you have now, and find they are the same or close enough, then these'll be great! If not, let me know...
    view full answer...
  • Do Optronics Trailer Taillights Meet Reflectivity Standards
    Hey Josh, Optronics does state that their trailer lights like the part # TLL12RK that you mentioned do meet reflectivity standards. They meet or exceed the requirements of the FMVSS.
    view full answer...
  • Recommended Replacement Tail Lights for an Obsolete 3-Prong Light
    Thanks for the picture. I went ahead and checked out what we have that matches that style of plug, and unfortunately we do not have anything that matches what you are needing. The closest 3-prong wire we have is the 3-Wire Pigtail for Trailer Tail Lights # 328-008-54102 however due to the different pin configuration it won't mate up with your current light. From what I could find online, that style of plug is pretty uncommon and is not going to be easy to come by so I recommend just...
    view full answer...
    Image 1 for
  • Will Optronics Fleet LED Trailer Tail Lights Fit 7" Long x 2-1/2" Tall Cutout
    The Optronics Fleet LED Trailer Tail Lights # TLL12RK themselves actually measure 6-1/2" long and 2-5/16" tall. The rubber grommets are what makes the overall dimensions 7-9/16" long x 3-5/16" tall and since those are the outside dimensions and they are rubber you will have no problems with fit.
    view full answer...
    Image 1 for
  • Plate Thickness Compatibility with Recessed Trailer Light Grommet
    The Optronics Fleet LED Trailer Tail Lights w/ Grommets # TLL12RK has grommets that are 1-1/8 inches deep. The plate dimension if you want to use the integrated lip on the grommet is 3/16 inch and if not is up to 1/2 inch. I went out to our warehouse to measure this for you.
    view full answer...
    Image 1 for
  • Replacement Tail and Marker Lights for 1996 Ranger Trail Boat Trailer
    Excellent idea, switching to LED. They use less power, last much longer and are brighter than incandescent lamps of the same size. Win, win, win. The grommet mount lamps you reference should fit in a 6-3/4 by 2-1/2 inch rough opening, which is the typical size. I'd recommend measuring the rough opening to confirm. If that dimension checks out, the # TLL12RK LED taillight kit would work well for you. For the marker lights, if the interior of their mounting brackets measure 2-1/2 by 1-3/16...
    view full answer...
  • Replacement for J-67 Oval Trailer Taillights
    For an exact replacement you'd want the part # TLL12RK as I looked up the J-67 and that's exactly what these are. Trailer lights are often made by several companies to the same dimensions etc and this is an example of that.
    view full answer...
  • Recommended Trailer Tail Lights To Replace Older Glo-Brite 9553
    The Glo-Brite 9553 you have currently measures 6-1/2" x 2-1/4" x 2-1/4" so for an incandescent replacement option I recommend the Custer Trailer Tail Light - Submersible - Stop, Turn, Tail - Incandescent - Oval - Red Lens # G65R which will fit your existing grommet and uses the exact same 3 prong harness making it an exact replacement. If you wanted to go with LED lights instead then Optronics Fleet LED Trailer Tail Lights w/ Grommets - Stop,Turn,Tail - Submersible - Oval - Qty 2 # TLL12RK...
    view full answer...


< Previous
123. . .4




Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video Edited:
Joshua S
Employee Cole B
Installed by:
Cole B
Employee Brent H
Installed by:
Brent H
Employee Amy B
Written by:
Amy B
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Hannah L
Updated by:
Hannah L

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


<