Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We've dealt with the rattles, the clanks, and the frustration of constant swaps, so we built a smarter solution. This anti-rattle collar installs fast, stays secure, and works with all your hitch-mounted gear, so you can focus on the road ahead.
Haul a trailer, load up a cargo carrier, or take the bikes out for an adventure - this anti-rattle collar keeps your setup secure across all your gear. Clamps onto any 2" receiver with ease - install it once and swap accessories worry-free.
1. Slide the clamp over the face of your hitch receiver
2. Tighten each side with the included Allen wrench
3. Insert your accessory into the hitch
4. Use the knob on the bottom to tighten the gate and get rid of any play
That constant clunking and rattling isn't just annoying - it's distracting. This anti-rattle collar tightens against the accessory in your hitch, securing it in place, so you can focus on the road, not the noise.
Install it once, and you're ready for anything. Clamp it on and tighten it with the included Allen wrench - just snug, not superhero strength - and enjoy a secure, rattle-free setup. Swapping accessories? Easy. Slide in your new hitch-mounted gear, twist the knob to tighten, and hit the road.
At etrailer, we know towing because we've lived it - just like you! That's why we designed this anti-rattle hitch collar to solve real-world towing headaches: the rattles, the clanks, the hassle of finding the right setup, and the frustration of complicated swaps. Easy to install, always ready, and built to handle any gear you throw at it, this collar is backed by our limited lifetime warranty, because we stand behind every product we create.
We're already working on versions for 2-1/2" and 3" receivers, because we listen to what real haulers need.
Notes:
California residents: click here
It seems to work well. Had to use the alternative installation with the tightening knob at the top right rather than at the bottom. After installation, the hitch is solid and does not rattle. One negative is the pin is tighter and harder to get through. I had to hammer the pin in so I could get the lock on it
Ramsey
3/23/2026
The first one I bought broke shortly after this review. Etrailer replaced it. The second one lasted one or two trips. I do not recommend this product. It breaks and is ineffective.
I'm impressed with your anti rattle product. It works really great with my bike carrier and I'm really liking not having to use a wrench anymore to stabilize it. I've been clamping my hitch plug with it too.
Brooke M.
3/26/2025
Thanks, Ray! We are proud of this part and love knowing our neighbors like it too! I really appreciate you taking your time to give us some feedback. And if you ever run into trouble with the part - let us know about that as well! ;)
Ray
3/27/2026
I couldnt be happier. This has worked like a champ with my trailers and my cargo carrier. Awesome product etrailer!
Gwendolyn Y.
3/27/2026
Using this on my 5th wheel trailer to help stabilize a (3) E-bike carrier. A two hour drive from our home down to San Diego and my bike carrier was rock solid. So far two thumbs up.
Kate F.
2/11/2026
etrailer anti-rattle for the win =) Wow Robert, that is quite the nice set-up you have! What adventure are you looking most forward to this year?
The easiest and best anti-rattle hitch collar I've found. I ordered two of these when etrailer posted them. I can swap out my regular hitch and my weight distribution hitch in less than two minutes. No more wrenches or wratchets needed.
My only disappointment is that it will not work on my 2023 Ford Bronco with the factory hitch and steel bumper. The gap between the hitch and bumper is too close and leaves no room for ANY anti-rattle device. Get on this etrailer, we depend on you!
Joseph
3/31/2026
After a year still the best money ever spent on an anti-rattle hitch collar. I’ve tried a lot of anti-rattle devices even some homemade rigs over the years and none of them have worked as well as the etrailer collar.
I finally had the chance to evaluate this anti-rattle hitch collar. It has been installed on my truck for a while but I've had no need to haul anything until recently. After installing my hitch hauler and loading it with my snow thrower, I set out to drive a few miles to clear snow for my family. I immediately realized I had forgotten to tighten the collar, so I was able to see how much the hitch hauler rocked around without the collar restraining it. At my first stop, I tightened the collar and then compared the movement of the hitch hauler on the next leg of my trip. There was a noticeable decrease in the amount of unwanted movement of the hitch hauler and my load. There still was a little movement, but it definitely wasn't as much as when the collar was not clamped down. I'm happy with the performance.
As for the anti-rattle hitch collar, it's great. But, because this specific item was back ordered for a long time, which when ordered it shows in stock.
Customer Service was very helpful and actually shipped the collar earlier than was projected. I've good luck with etrailer's products.
Buck
4/2/2026
Its still working great with my trailers not having that awful receiver rattle. I have two neighbors that liked my hitch collar so much that they ordered their own.
James D.
4/2/2026
The build quality is excellent. Also very easy to use. I have not had the chance to go on a trip as of yet, so I cant' tell of the unit will keep the shaft in place for extended periods. But based on what I have seen I am hopeful. The unit is installed on a 2021 Ford Ranger.
Gwendolyn Y.
2/26/2025
Hey Neighbor. Do you have any upcoming plans for a trip?
Jayf901
2/25/2026
As noted earlier, Ive had this product for about a year. During that time, the device has performed exactly as I expected, eliminating any rattle from the receiver. My only disappointment is that the set screws securing the unit have already started to rust and will need replacement. Overall, in terms of performance and meeting expectations, it has done just as I hoped.
I ordered this to go on my 2013 Silverado. There was an awe shucks moment when
Hitch Collar wouldn't fit over the receiver by a couple thousandths of an inch.
I ground off just a little on one side of the part that grips the lip on the back of the receiver and all is well. Easy on,easy off, and works well!
Mildbill
4/3/2026
I guess I didnt read the small print before ordering it. This will not work when using a weight distribution system. Thats a very true statement! It seemed to work when I left the house but by the time I got to the campground - 20 miles away - it was loose and rattling. Re tightened before the trip home but got the same result. Purchased another style and will be trying it out in a month or so.
I like this anti-Rattle so well that I just ordered another one.
Brooke M.
3/27/2025
That is so cool to hear, Bill! Thank you so much!
Bill R.
3/28/2026
I found out that you have to keep a eye on the mounting screws, they come loose and I lost the anti-Rattle
Great anti rattle device! Easy to install and also lets me change hitches with a twist of a knob, instead of having to uninstall my old anti rattle device to remove the hitch.
Tim H.
3/30/2026
Working out just fine! I like that I dont have to disassemble an anti rattle devise to remover the hitch.
I took my tractor in for service and the trip involves about an hour of travel on rural roads. The truck and trailer are great, but the stops and turns are pretty noticeable and made me think of the email ad I saw for this so I ordered it when I got home. It came the day before I picked up the tractor so I put it on (just took a few minutes) and the trip there and back (empty and heavy) were smooth as can be. Definitely worth it!
They work great, better than the old ones I had. MY hitch rattle is gone and our wheelchair rack is sturdy and quiet.
Henry
3/31/2026
The Anti-Rattle Hitch Collar works great, purchase 3 of them. One is on our Chevy Traverse, 2 on my Chevy Silverado 3500hd dually. Stopped the rattling and stay in place, if you do a lot of driving just retighten them every once in a while. I would recommend getting them, good strong product.
I like the easy instal and then the handy knob to tighten the anti-rattle mechanism. On the negative side the two screws on the left and right of the face plate loose their paint and rust significantly. Also the the plate that
tightens on to the inserted hitch to keep it from having movement/vibration has begun to wear down. Note that I Pull an RV travel trailer cross county. Short hauls like towing your boat to the input ramp, i.e. short distance with lighter load probably would have minimal wear.
Very happy with this purchase! Finally a solution to the hitch wobble that still allows easy removal of my bike rack. It was a tight fit and I had to rotate it but it’s working great.
Lazer S.
11/4/2025
Definitely a tight fit, but I'm glad it's working well for you, Jon! What vehicle are you using this on?
The product was great, and replaced my old anti-rattle bracket that would required a lot more work to install the hitch, however the installation of the e38FV was not easy. On my 2024 Toyota Tundra after adjusting the rotating handle to the right pressure with the bouncy of he ride the handle would get loose and the rattle would start. I was able to fix this problem by installing the bracket 90* to the left and placing a rod on the top horizontally in orrder to stop the handle from rotating. Would be great if you could have a stop mecanismo to avoit the handle from rotating in transit.
Lazer S.
4/7/2026
Glad it's working well for you, John! I will pass your feedback on to our product development team as well. Having a stop for the wingnut is definitely a good idea! What are you typically towing?
This is an excellent anti-rattle collar. I used it towing our camper and several cargo trailers. It replaced several clamp anti-rattle devices. This collar requires no special tools and holds our receiver hitch in place. I highly recommend this device!
Overall a great product and easy to use. I got this because when towing my trailer, I could feel a clunk when stopping due to the hitch moving up and down. This was able to tighten the hitch and stop that. After a year of use and just leaving this on my truck, the exposed metal parts (the part that actually clamps) shows signs of surface rust, but everything still works fine.
Heavy duty and so easy to install. Put my receiver in, tightened down the handle and there is zero wiggle room. Works as advertised!
Lazer S.
11/25/2025
Glad to hear you are liking it, David! What are you gong to be using it for mostly?
Lazer S.
11/25/2025
I was using it with my weight distribution hitch. It DOES say not for use with weight distribution hitches, but I believe when I bought it, it did not say that. It hasn't held up very well with bent pins. I obviously don't use it anymore, it's just a paperweight now. It may work great if used without a weight distribution hitch. Live and learn.
This product is incredible. It’s everything you would want it to be, solid, well-built, and looks incredible. It works exactly as you would expect, I put it on my Suburban and havne’t heard my hitch make a peep since. I bought another one for my gold cart trailer where I mounted a receiver hitch on the floor (with some C-channel underneath to strengthen the wood) and I can put my ATV receiver hitch tray to go on the gold cart, and put one of these anti-rattle collars on that receiver too. Then, I put an anti-receiver collar on my Evolution D5 Maverick golf cart receiver hitch so when the tray is in, it is peaceful and motionless. This thing is amazing. I feel like I should be on the Anti-Ratle Hitch Collar marketing team but honestly, this thing is legit. Already brought 3 of them if that helps seal the deal if you have read this far…. Took pics of Sub, annd cart, trailer isn’t ant house. Also have to give shout out to etrailer team who are really good at communications. 5 stars for sure.
Brooke M.
7/3/2025
Haha I mean if it were up to me, I'd make yo some kind of partner for marketing for sure! Thank you so much for the glowing review and sharing all the ways you use it. Really feels good knowing there are folks who really like the collar.
This item broke on first use. When it broke it became evident that this type of item cannot stand up to the stresses that a trailer will put on the system. Do not buy this item or anything else that attempts to control rattle by attempting to lock the receiver and hitch in place by this method.
This Anti Rattle Hitch Collar is awesome, by far the best on the market. I have purchased 2 other types on amazon that were junk. I wont do that again. etrailer 100% of the time from now on. Everything I have bought from etrailer is great and well made and they even have how to videos with the orders that I have purchased. That was u bonus to help installations.
Well, at first it seemed like this was going to be a great solution to stop the rattle when we are towing our 16' flat bed trailer. However, after a couple of months of use, I noticed that the pins along the sides were starting to bend. This ,in essence, rendered the device useless as it would not tighten down on the receiver hitch.
I gave it a 4 star as I have yet it to pull any of my 4 trailers. But am impressed with the design and construction. Will review the function later when spring arrives in Pa.
Barry
2/16/2026
This is the best anti- rattle product I have used. It is doing what it was designed to do. I have used with all 4 of my trailers. I highly recommend it if you are looking to remove the rattle when pulling a trailer.
Gwendolyn Y.
2/17/2026
Looked like it was a great product even feels strong. However, in actual use it failed pretty quick. I reached out to you guys and got a replacement one and it did the exact same thing. I thought maybe my little trailer was too much weight, but the issue is the clamps that hold the anti-rattle fitting on bend too easy.
Do you have a question about this Hitch Anti-Rattle?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
3/22/2025
Hmm..I have never seen someone use it in this configuration. Ill be sure to pass this on to our engineering team. Thanks for sharing the photos! :)