Best Workhorse P Series Anti-sway Bars

OH My! If you are thinking about getting one for your P32 wide body. Please don’t hesitate. It REALLY Works. Take the white knuckle effect out of driving. EASY installation! Easy Ordering from etrailer. Roger helped me get through the buying process and shipped to my house in 2 days! Thank You!!

Parts and build were very good. It was heavy and made a very noticeable improvement in the ride. When on curves the RV tended to be much more stable and a lot less roll tendency. I am very happy with the added stability.

Replaced the sway bar on my 1996 Fleetwood Flair. Easy bolt on installation. Have issues with the front-end swaying and bouncing around in cross wind and when approaching a slower moving truck. The new sway bar helped some but not as well as it was claimed.

This should have been original equipment.It ( 1995 Safari Trek) now drives like a completely different vehicle! I added Sumo Springs on the rear .These 2 items together are well the money. I installed both alone by myself (67 years young).

I found this easy to install however the bracket to hold it onto the steering rod kept slipping. NOT a good bracket design. In addition, the stabilizer only improved the "wondering" by about 30%.

Nick S was GREAT help. He helped me with the right stabilizer for my motor home and had it shipped the very same day. Stabilizer was installed with very little effort and it is making quite a difference in my ability to steer the motor home. I will definitely recommend etrailer to my friends.

No issues. Significantly helps steering.

I received my front anti sway bar (RM-1139-140) around noon on the day it was promised. The package was undamaged and all parts were contained within. After lunch I installed the bar in less than 30 minutes, which included the removal of the factory bar. I installed it by myself from the ground. Simple install although I did deviate some from the instructions to make it easier for me as the bar is heavy. Instructions say to attach the bar to the axle with the bushings and saddle clamps first, then bolt the endlinks. Instead I bolted the endlinks first then simply swung/rotated the bar to the axle and attached with the saddle clamps. I did not have to lift the heavy bar to the axle as the weight was already supported by the endlinks. Easier if doing the install alone in my opinion. About a week prior I had installed a Roadmaster Reflex Steering Stabilizer ( RSSA-RBK9). These 2 items greatly improved the steering and sway problems which were extremely bad in my 2013 Winnebago Vista 26HE. So bad that I considered the drive extremely stressful and dangerous. With these 2 parts added the drive is now 80 to 90 per cent improved. Very happy.

The anti sway bar helped a lot, but my Fleetwood could use a little more help. Probably needs the front end too. I installed the model made for coaches a year or two newer and it went on much easier than the unit requiring frame drilling and coil spring recounting. I ordered both to cover myself, didn't open the kit for older chassis and sent it back - for full credit, except for shipping, which is fair. Trailer met each promise - product, dates, and return of the unused unit. 5 stars for service 3 stars for eliminating the sway. ETrailer provided EXCELLENT videos for installation, and did everything they said they would! My wife is happy and I'm her hero. That's always worth 5 stars!

I spoke with Jameson, he understood my issues and recommended 2 stabilizer bars. They were delived on a tight time-frame. These ba4s made all the difference in the handling of my Newmar Baystar Sport. THANK YOU FOR YOUR EXPERTISE!!

The good is that the parts are first class, and it works very well. Even being mechanically inclined, the directions could use an upgrade. Needs more help where the spaces go.

I installed these anti-sway bars front and rear because I was fighting crosswinds and passing semi-trucks, very exhausting driving. Made a huge difference. Our old Newmar (Workhorse) had no sway bars at all.

Easy installation took me less than 40 minutes from start to finish. Test drive was a “remarkable” difference than before.

The hardest part is getting the U-boats off and back on again with 250 pounds of torque took me about an hour and I’m 73 years old so I think anybody could do it. We took it out for a test drive and it makes a big difference with the wheel coming back to center, even my wife found it easier to drive. There is know more drifting.

This installed in less than an hour, 2006 Monaco La Palma Roadmaster Chassis. I used a 1/2 cordless 1100 Ft lb. impact to remove the spring u-bolts, came right off. The rest is as the instructions say. I took for a road test and drives a straighter. etrailer shipped and I had in a couple of days. etrailer is the best for me. Tools for this is 1/2 drive 15/16 deep socket for the axle U Bolts, 3/8 drive 3/4 inch for the shock bolts and a 3/4 open end wrench, and a 3/8 drive 9/16 deep socket for the tie rod U Bolts. Easy to do yourself.

Thanks for the fast shipment of this order -- This stablizer was installed on a 07, Monaco Camelot, with a Dana Axle, & air bags -- Your web site states that the RBK6 will not fit a Dana axle -- I called Roadmaster, & they said it will fit, & it does --The The steering stablizer install was not a tough job at all -- The only problem was loosening the nuts that hold the axle, & the bolts not being long enough to add the bracket -- I do have air tools, & I heated the nuts with a plumbers tourch -- It took longer to free the the nuts, that it took to do the rest of the install -- On the test drive, no adjustment was needed -- Very pleased from order to install -- William Willard

Usual excellent service— sway bar delivered on schedule. I’m in the process of installing the front swaybar for my Bounder and I will update once install.

After a year of usage, I couldn't be happier with the Roadmaster front and rear anti-sway bar kits. The rear kit for my W22 chassy, the mounting hardward would not fit properly. I call Roadmaster directly and they custom built the mounts, painted, and shipped within days.

Excellent setup, road manners are so much better. I don't have to work to keep the truck straight anymore. Installed in less than an hour with just a few basic tools.

This stabilizer made my truck much safer to drive. When pulling a trailer, the truck was difficult to handle. Any line or imperfection in the pavement would lead the truck around and cause it to sway. It now handles much better.

Quality built steering stabilzer. Well packaged and arrived within my expected time frame.

I did the drive to find center on steering wheel which made installation easier. Removing existing steering stabilizer and brackets and installing the new wasn’t difficult at all with just basic tools. Read instructions and watch video at etrailer site. The reflex steering stabilizer is worth the money but should be the last modification done in my opinion. The first thing to install to help the swaying, leaning or just being pushed around by the semi trucks is #1 Roadmaster rear anti-sway bar if the manufacturer left the original small one on. #2 Roadmaster front anti-sway bar. Then #3 Roadmaster Reflex steering stabilizer. I say Roadmaster because the bushings and linkage for all of these are very heavy duty compared to the others that I compared. After doing all three of these upgrades to my 2022 E-450 33 foot class C the driving has gone from seriously gripping the steering wheel to driving relaxed with one hand in high wind or the passing of big rigs and ruff dipping road surfaces. I did this upgrades one at a time in the order I’ve indicated so I actually got to feel how each item help to control my motorhome. I am very pleased with all. Thanks etrailer for the excellent service.

First, Eric was a great help throughout the purchasing and installation. I watched the tutorial numerous times and set up my tools. I bought a 3/4 inch torque wrench at Harbor Freight and a 4 ft galvanized pipe at Home Depot. I followed the instructions and the tutorial to the letter. The bar and mounting plates are heavy, so be very careful. This job isn't for a beginner, but if you are somewhat mechanically inclined, you can install it. The 300 Ft. Lbs torque of the 8 nuts took everything out of me. LOL...I adjusted the end links twice, and it leveled out great. Now, I will do a test run and see how it improves the handling of my motorhome. Its a 2022 Entegra Vision 29S.

The Anti Sway Bar completely removed impact of Semi Trucks passing us on the highway. It also significantly reduces issues with wind. Even reduced sway related to rough roads.

So far so good; after installation of the stabilizer the rv steering straight as expected. I have not going the highway yet but... locally; the rig is doing well... and doing very well sitting at the drive way looking pretty!... i have to revisit this review for the final test of 1000 miles. etrailer's staff is very helpful in communication and responsive through email support. I rather pay little more for the product with the proper guidance and advice from etraile'r staff. I included a few pictures after i installed the stabilizer at night. On the installation; the instructions doesn’t instruct you to put red lock tight on the nuts; but i put the lock tight on there anyway to reinsure the nut doesn’t come off due to vibration since the bolt and nut holding the bracket barely shows any treads after torque.

I bought this stabilizer for a 99 class A Motorhome. The steering stabilizer kit came quickly and complete. Instructions are easy to follow. The whole install took about 40 mins. Just a couple adjustments to center the steering up. I initially bought the stabilizer because in strong crosswinds the motorhome was hard to maintain lane control. The stabilizer has improved handling. You must also insure that other steering components are not worn. I recommend the Roadmaster Steering Stabilizer for older Motorhomes.

I bought this product because my Super C was not confident and even felt unsafe. Spoke with Katy from etrailer, and they had the right knowledge to bring a viable solution. Now we ride with confidence and safety.

I’ve been procrastinating for years, I should have donne this modo à long long time ago. What a difference it made on my Kodiak based RV handling. Stop putting it off Do it now, you won’t regret it.

First, I did have to grind off corner of the plate that mounts under leaf spring bolts. It would not lay flush so I tapered one of the edges where it met the axel a little bit till it laid flush. I did buy a 3/4 inch wrench set but with an rv, it's good to have and will possible allow me to get the 22.5 inch wheels off in an emergency. This with a good solid 3' pipe and I was able to fairly easily break the leaf spring bolts free. I used boards to ensure the fronts tires were fairly straight, laying them alongside the tires and eyeballing to see where they lined up with the back tires which are about 4 inches wider than the front outside width. I mounted the steering stabilizer and took it for a test drive and it was good the first time, no additional adjustments needed. Feels good on the road, good around turns, and even at low speeds around the driveway, I did not notice any extra effort to turn the wheel due to the heavy spring on the stabalizer. Put about 75 miles on it and it feels solid and stable though no high winds or passing semi trucks yet. But my 2007 ford f53 22000 lb chassis under a holiday rambler admiral body has always felt pretty good. Just trying to make better, next up is the new koni evo fsd heavy duty shocks coming today.

I have a class A motorhome, F53. I installed a Roadmaster reflex steering stabilizer, a Roadmaster rear anti-sway bar 1 3/4" diameter, 4 new koni shocks and 6 new tires. Now, it feels well planted on the road. Its a combination. Very happy !

Sway bar operates fine. However, the installation took over 10 hours due to rivets on the leaf springer hangers vs. bolts and with 80gallon fuel tank between the frame Camping World had real issues grinding the rivets and replacing them with bolts! In 2008 apparently GM used two methods to install leaf spring hangers. Even with advance research this was not well documented as a consideration and one roadmaster had limited knowledge of when I encountered the problem. etrailer did not stand behind this issue they left me to resolve and did not offer a return and credit. I have bought from etrailer prior with good results including best price match guarantee however have not purchased anything from them since this issue!

Can't recommend Enough...combined with front sway bar kit turned our Chevy Kodiak 5500 motorhome into a Corvette..night and day difference...can't believe I drove all those miles without one...

Everything pretty much fit like it should. Seemed to reduce the heavy rocking when You make sudden turns or coming out of a parking lot where the road is at a different level.

Wow, This sway bar is big, heavy, beefy and strong. I saw all the great reviews but was still surprised when I got it. Installation was straight forward but I did have to have a mechanic shop jack the RV up and take the huge bolts of the U-bolts because my impact wrench was not strong enough. I've only put a few mines on it since I installed it but I have already noticed a difference.

Did not fit our 2014 Sunseeker with air bags. It contacts the rear differential. We contacted etrailer and right away they emailed us a label to return the item, and placed an order for a Hellwig anti sway bar which fit perfectly. They're customer support is top notch.

Fairly easy install. Drilling the hole in the frame was decent started with a 17/64 pilot hole then the 17/32 final hole. Take your time and let the drill do the work. Do be aware of the hole placement on the drivers side as there are brake lines and wiring there.

Dit this job my self , no lift , on the floor on my back and got it installed. Front and rear anti sway bars and 4 new bilstein shocks and yes u need the 8 swivel head socket/wrench tool from harbor freight to do driver side. The rest of the instalation whent well, the onley consern is the front bracket sadle and bushing sits nearly on the bend of the sway bar ( see photo )

We upgraded our front sway bar on our 2005 Jayco Granite Ridge on the Ford E450 chassis a year ago prior to starting a 17,000 mile trip around the country. It was a game changer for, improving handling and stability significantly (along with proper tire inflation). The installation video is very misleading regarding the ease of installation, showing only the attachment on the right side. The left side is much more difficult requiring wedging the stabilizer tab between the suspension and stabilizer plate. Just be ready for that, it is more involved than the right side.