Best Winnebago View Motorhome Bike Racks

Good mount over-all. Item was delivered without the packing straps. Not sure if the package was opened prior to shipping. There were no missing parts. The mount seems to function normally. I do have one complaint - the mount is not level when attached to my Ridgeline 2" hitch. My hitch is in perfect condition - unused prior to the purchase of this mount. The mounting bolt for the hitch is fully tight, but still the mount is crooked to right by 1 inch. Oh well - not a deal breaker.

We have two e-bikes and researched for a rack substantial enough to carry them long distances. The RockyMounts Monorail is doing the trick. We remove the batteries and seats. Based on other's advice, we put pieces of foam pipe insulation over the straps and braces that contact the bikes. Also, just for overkill, put additional cinch straps over the front tire rim at the wheel support. I also fabricated a license plate holder because the plate is obstructed on the SUV. The quality of construction and ease of assembly are both outstanding.

I've been looking a eBike racks for about a month and finally decided on this Swagman rack because it's rated for use on an RV. That's what I needed because it will be on the back of my travel trailer. I had it on my wish list on another site but etrailer had it for $[XX] less, so I jumped on it. It was fairly easy to put together, I installed it on the hitch on my truck so I wouldn't have to wrestle with it on the floor of my garage, that made it easy to assemble. This rack is very well built, and is very solid, it doesn't move while on the hitch on my truck (I installed the RV hardware) so I have no doubt that in will be fine on the back of mhy travel trailer.

So far so good! I have used it on the back of my Jeep Grand Cherokee and on the back of our travel trailer. It is a pretty solid e-bike rack. I would definitely recommend this e-bike rack. We did purchase it for using on our travel trailer, but also works great on the back of our cars, which have 2" hitch receivers. On the travel trailer we also installed a Draw-Tite Hitch, along with a Curt 14" hitch extender for 2" trailer hitches and a Malone anti-rattle hitch lock system. We purchased everything from etrailer. I am very happy with how all of this works together for hauling our e-bikes on the back of our travel trailer.

This rack is heavy, easy to assemble and has zero wobble. The reason I purchased this rack was due to the quality of the rack, but also my last experience with trailer. Great customer service, and if you have a question, it's pretty easy to get hold of a real person! I actually purchased this for an Ebike.

Excellent bike rack. Easy to put together. Fits perfect with the etrailer curt hitch. This is a heavy duty bike rack, which also means it heavy but still manageable. Using this for my Aventon Ebike.

This is a well designed rack. Adding and removing bikes is quick & easy. Just set the bike on & slide the padded hook down onto the bike frame to secure it; no straps required. If only one bike is transported, it does not interfere with opening the trunk on our Tesla Model 3. With 2 bicycles the trunk cannot be opened. For 2 bikes the Swagman model that can tilt might be worth the extra 22 bucks. This rack uses a bolt in the receiver hitch instead of a pin. This locks it securely preventing it from moving in the hitch & rattling. It also requires a wrench to remove it, good for theft prevention but one more thing to keep track of. For storage on the vehicle the top bar folds down. For storage in the garage, the left & right bars fold up & you can hang it using one of the hooks.

So far so good. The rack wiggles a bit, but that is expected. I have it on my 2007 Corolla and I have hit 65+ on the highway with it and have not had a problem. I would recommend getting a locking pin. The one included is threaded, which aside from security, makes it harder to take the rack on and off. I would also look into a DIY way to secure the wheels better. I am using some bungee straps which do the job no problem. The two bikes I carry are at the racks capacity.

Works for my fat tire bike. Once it's set up, it's easy to install and remove. I had to cut out some of the plastic cladding on the underside of my bumper on my 2014 Subaru Outback. Good value. I've had no issues.

GI love the Rack, it is easy for me to handle, (as a 89 yearold rider.), two bikes ride and fit very nicely. Like how it folds down,and how it folds to open the tailgate . Great quality for the money, I would highly recommend this rack

Super easy to load 4 bikes and go. Takes me 5 minutes to get all 4 on the rack, compared to 15-20 with the rack I had before. I would change nothing honestly. It's a fantastic rack. It has performed great. I can now quickly load 2 kids bikes and 2 adult bikes on the rack with no special adapters. We can hit trails faster and spend more time riding. There is no real downside. It's also significantly cheaper than competitors and provides a much easier and smooth experience. Is it a great rack for small families who want to ride together. No adapters needed for different sized bikes and super easy to load and unload. I would not recommend this particular model if you don't plan on using more than 2 slots. But for 3 or 4 it rules.

One year in and it is great. I have a 2021 Subaru accent and it is perfect. We carry 4 adult bikes and while it is a tight fit it works great. The rack is VERY solid and does not move when tightened up. Over the past year we have used it 3-4 times with no issues so far. It is easy to use and one person can easily load and unload the bikes. The tilt up feature is nice and when the rack is down and there are no bikes we can open the back hatch without an issue and there is plenty of clearance. We have been very happy with the performance and the price.

This bike rack is awesome. Our two e-mountain bikes fit perfectly on the rack. We have taken them on long road trips with no issues. Great bike rack.

Great sturdy rack, and the wheels are very beneficial. Have never been a fan of the Thule locks, but the rack makes up for it.

Such a fabulous bike rack!! The rack is simple to mount onto the van’s hitch. It’s easy to add or take off the outer rack either before or after putting it on the hitch. The two part design is a great feature for taking a bike to the shop for repair, for when it’s just the two of us, or we can quickly add the second half for two more bikes. It folds up against the back of the van easily and securely. When needed it holds four adult bikes without any problems. Bikes are SO enjoyable to load onto this rack - way better than racks that support the bike by the frame. I have a Y frame bike so it was always challenging to load it onto a traditional rack. The tire supports move to accommodate any size bike. Bikes that have the lower frame get mounted closer to the vehicle for each section of the rack. The rack is stable when driving, even when fully loaded. The locking feature is nice, especially for when we’re away from home and the bikes stay on the rack overnight. Be careful when lifting as the rack itself is heavy.

I've been using a Yakima RidgeBack 4-Bike for many years however I needed to find a bike rack that would transport my wife's new Trek Verve +2 Lowstep E-Bike. Since it is a Step-through and weighs 52 lbs. with the battery, I was uncomfortable hanging the bike off the RidgeBack. I typically only transport 2 bikes however occasionally need to pack up 3 or 4 bikes. After much research, I decided on the Hollywood Racks Sport Rider SE4. I loved the fact that I could take off the extension and make it a two back rack and appreciated the price. I was however concerned the E-Bike might be too heavy as the specifications note a 50 lb. per bike limit so I reached out directly to Hollywood Bikes. I asked if they thought it'd be alright to place the E-Bike closest to the vehicle with the battery removed. I heard back from them within 24 hours and they agreed, with the battery removed it would be fine. I ordered the SE4 on Monday morning and it arrived Thursday. It was well packaged and easy to assemble using the instructions. I had absolutely no issues and it went together perfectly. The rack is of very good quality and sturdy even when loaded up. I really like that the bikes can be locked down and everything, including the supplied cable is keyed alike. I was able set it up for only 3 bikes as that is all we're taking to Florida next week. I'll follow up after our trip.

I'm a senior e-biker who wishes to roll back the years, but that isn't possible. I drive a 2020 Chevy Equinox and have two electric bikes, which I had carried on a small rack. I saw the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes and resisted no longer. A few days later, my package was delivered. That night, I read and re-read the assembly instructions. It went together well, with no glitches. The hitch is super sturdy. No wiggle room at all. Once together, I loaded up my heaviest bike, mindful of using one of those metal bars for support since it's a low-step bike. (Remember, I'm a senior. Legs don't swing high like they once did.) Photos accompany them to show how she will ride. This will allow me to explore farther and go places I could not have before I had this rack. I like the ability to flatten it when not in use. This will also allow me to haul my granddaughter's bike together here in South Jersey or, as in "Toy Story," "To infinity and beyond."

Bought to carry two 60 pound e-bikes on our class C RV and it worked great.

Love this rack and use it every day on my Toyota Tundra pickup. I ride my cruiser on the beach and loading/unloading bike/s is really easy. I travel to riding locations as well and even at highway speeds, two bikes remain secure and wobble-free. My bikes are expensive and the stand-up mode of securing them means no worn paint or scratches. If any complaint it's not made for the salty air here in FL and certain parts corrode...even with daily rinsing off. The rack is perfect for the fat and oversized wheels on bikes I've owned...even heavier ebikes...WILL BUY IT AGAIN.

I've had it for a year and I'm VERY happy with my bike rack. Love the built-in locks for deterrence and piece of mind. STRONGLY recommend getting an installer who knows what they're doing. I took it to my dealership and they were going to cut into metal... took it to an authorized installer and they had it securely bolted in in half an hour. I've already demonstrated it to two people out and about who wanted advice on hitch racks. It's a good, solid, easy to use rack! Zero regrets.

Fantastic bike rack. Switch it between a Honda Ridgeline and a Subaru Outback Wilderness and it works perfectly. Accidentally lost the locking pin that secures the rack to the trailer hitch and when I inquired with Kurt about ordering a replacement lock keyed to match the locking cables on the rack and the Kuat rep sent one to me for free. (I removed the rack and left the lock sitting on my car bumper. Later that day I drove off and lost the lock on the highway).

Great bike rack. It is easy to install the hitch on a vehicle and to remove it. The Kuat NV 2.0 provides a smooth, gentle ride for road bikes and mountain bikes. Great purchase. Highly recommend.

This is a really good rack. We do a lot of car camping out of our Subaru Outback and I wanted a bike rack that would swing aside so we can raise the hatchback and easily access the camping gear, cooler, duffel bags, etc that we carry in back (see photo). This rack 100% solves that problem. Further, the bike hold-downs are very secure. I use them on their own for shorter trips. For a longer trip or one that may involve a rough road, I supplement them with a ratchet strap, but this is probably just unnecessary paranoia--the hold-downs are excellent. My one heads-up about this rack is that it is heavy. I am a large, strong man and can attach it myself, but I do not look forward to the chore. This is a beefy rack and the weight is unavoidable. I welcome how sturdily-built the rack is. We typically carry my normal bike and my wife's heavy e-bike on it, and the rack is totally up to the job. Highly recommended. I have zero regrets about the purchase and the investment in this rack that will serve us for many years to come. The design is pretty much perfect--I can't think of one thing I would change.

We love our RockyMounts BackStage Bike Rack. The fact that it can hold our two e-bikes and swings out for rear door access makes it perfect for vanlife. Service and communication from etrailer is outstanading!

Easy to use and mount on my Outback and feels very solid. The hold-down bars slide easily, Velcro straps simple to engage and I love the fact that it folds up. I can put the garage door down while the rack is attached to the car. It is rather heavy, but manageable. I also love the screw device at the bottom that tightens the tongue in the car hitch.

First, the bicycle. This rack was purchased of r the specific purpose of hauling two Cannondale EQ DLX Remixte bicycle equipped with a basket on the handlebar. You’ll also notice that the bicycles are step-through, thus requiring the use of a crossbar of the Now, to the rack. It arrived on the day specified on the order’s confirmation and was very well packed… double-boxed even. Opening the boxes revealed the sturdy, wellfinished rack parts arranged neatly and isolated from one another with separate boxes and foam material. I immediately began the assembly, my review of which follows. The instructions are clear but I immediately formulated a difference of opinion on step one which instructs that the hitch tube should be inserted into the trailer hitch. The instructions then lead you to build the rack while mounted on the vehicle. This may be acceptable if you’re a teenager willing to squat on the ground or sit on a low stool for 30 to 40 minutes but, given my age, this was definitely not my cup of tea. So, after making sure that the hitch tube fit the trailer hitch properly, I proceeded to complete the assembly on a workbench. One item that I had to change is the position of the ratcheting frame hooks. To accommodate the crossbar on each bike, I placed the short hook facing the car and the long hook facing the rear. All the required tools are provided, the rack is super easy to assemble and requires only a bit of time. The fit on my 2018 Hyudai Santa Fe is perfect. So why did I chose this particular rack? As you can see from the picture above, the bicycles each have a basket on the front handlebar. All the hitch racks that I saw had fixed wheel trays, the trays were too close together, or the rack did not come across as being very sturdy. The wheel holders on this rack are adjustable so that I can stagger the bikes’ positions (one further left and one further right) to avoid the baskets coming into contact with the other. The spacing between the two bikes is also generous. Also important for me were all the locks and the ability to tighten the hitch tube inside the trailer hitch by turning a crank and not have to deal with nuts and bolts to remove a hitch clamp each time I want to install or remove the rack from the car. The folded rack fits nicely on the back of my 2018 Santa Fe The trunk opens with room to spare when the rack is tilted. Note the crossbars on the bike, short hook facing car, long hook facing away. The front and rear wheel holders are staggered to make room for the baskets.

I purchased this bike rack for my 2018 Honda Odyssey. I am very satisfied with the bike rack and purchase experience from etrailer. I received prompt responses for my queries which helped me decide between Inno vs Thule. Inno bike racks is very well build, easy to assemble and holds your bikes firmly by tyre with out any damages to your bike body. I use the bike rack to carry a Trek Dual Sport - Large and Trek Verve -XL. I strongly recommend this Inno for bike rack and Etrailer your purchase.

Loved it so much we ordered it twice! We had our first rack 3 years and re-ordered after we were rear ended and the rack was damaged. Our e-bikes go on and off easily- assembly was easy. We have a 2020 Toyota Highlander and this rack works beautifully - in the photo I have blacked out our license plate state and number. I put reflective stickers on the rack tire holder bar, as our back license plate is maybe difficult to see with the bikes in place. We wouldn’t need to, but we also remove our bike batteries to lighten the load and reduce road and weather spray during our 1,900 mile trips. We LOVE that the bikes tip away so we can access the tailgate without removing the bikes!! Best bike rack ever.

Excellent customer service and super fast delivery! Bike rack is true to Thule quality and workmanship. The rack is sturdy and the bikes completely secure. Bikes do not touch each other at all. The rack is quite heavy, but not too hard to handle and load.

Fast delivery and great product! I would recommend that you look up videos on how to assemble. The instructions that come with it are basically useless. With the help of a friend assembly was easy. So far the rack has worked perfectly. It is large and heavy so it could require two people to put in on and take it off of the tow hitch. All in all I am very satisfied!

This is a really well-made rack that much sturdier than my last hitch-mounted rack. My only concern, before purchasing, was whether or not the 3rd bike, because of its distance from the hitch, might put too much of a load on my suspension, but my 2020 Outback only squatted a 1/2" or less with all 3 bikes loaded. (Note: the bikes are roughly 30 pounds each. See pics.) I only wish that RockyMounts would have included better locks. I know that locks only keep casual thieves from stealing, but these are really, really cheap. This likely isn't as problematic for the hitch pin (which is hard to see/get to) as it certainly is for the locking cable pin--which is much more visible. Still, this one shortcoming aside, I'm very, very pleased with this purchase. Plus, and I know this might not be the best reason to buy the rack, but it looks really nice in the folded-up position. Finally, I really appreciated the wonderful videos and email answers provided by etrailer.com, which helped me understand the numerous racks and pick the one that best fits my needs.

Poor quality. It doesn't securely lock the screw bolt. The nut which is attached in front tire guard is spinning with a screw bolt and it grinds it's hexagon shape hole.

I looked at a LOT of bike racks, but when I saw the product video for this Hollywood rack and it was holding the bikes rock solid, no loose bouncing anywhere, I decided to try it and I haven't been disappointed yet. It is solid in the mount, it holds the bikes securely and the locking bars are a good deterrent to anyone wanting a quick steal. I don't leave mine on the car all the time, but so far in the weather here in Florida, it's holding up nicely. Add all this to the great price and customer service from etrailer.com and it's a big win for the average consumer. Thanks, etrailer!

I like it a lot! I think it has solved my issue with having in easy, yet stable way to haul my bike on my 2012 Honda accord coupe. It's only been one day, so I can't speak about the durability. But it's definitely use a friendly and sturdy.

We love this bike rack for its ease of use and solid construction. Bikes are quick and easy to load in and lock down tight. The hitch-receiver tightening system works great for a wobble-free rack and the hinge and locking lever work smooth and solid. It looks nice too.

So after much research into bike racks, I decided on pulling the plug on the Kuat Sherpa 2.0. I've looked into the Kuat NV and other brands, but they were just too much for my needs. If you've got "regular" bikes and not the heavier eBikes, then this rack is perfect. I wanted a hitch rack that was user friendly and not overly complicated. I have a mixed bag of bikes and this rack can handle them all, from mountain bikes, street bikes, and BMX bikes. I like that this rack comes with an adapter piece for 20"-24" wheels. Assembly of the Kuat Sherpa 2.0 is really a no-brainer. I think it's only 4-5 bolts really. Everything else is ready to go. The anti-rattle hitch ball mechanism is simple to use with just a twist of the dial, easy. The tilt pedal/lever is also easy to access should you need to open your hatch, a solid "click" assures it's in place. So far, loving this rack. Fit and finish is superb. Thanks to Jerred and etrailer for answering my questions, always helpful.

I installed this rack onto a Curt trailer hitch which is mounted onto a 2017 Honda Fit. I have been using it intermittently for several months, probably about 5 times with one bike and twice with two bikes. I give some pros and cons below and then elaborate. Pros: easy to assemble, easy to mount and dismount bikes, easy to lock and unlock, how to put the rack into different positions is intuitive Cons: inconvenient to put the rack into different positions, inconvenient to mount the rack onto the hitch, rack protrudes about 15 inches from bumper when in flipped up position (seems very vulnerable to someone backing into it in a parking lot, very inelegant looking I say the repositioning is intuitive because there is really only one way you could possibly place the pins for each position. But removing and replacing two pins is much less convenient than turning a knob or a lever, like some racks do. Also many racks fold and flip in such a way as to look very unobtrusive when in non-use mode. This one looks like kind of a monstrosity. That does not really bother me but it might bother some owners. The part that does bother me is how far it protrudes from the car. I back into parking spaces whenever possible to avoid someone bumping into the rack and damaging it (which happened to a friend). My number one suggestion for Curt is related to mounting the rack onto the hitch. Make it easier to tell when the holes are lined up so that the bolt/pin will fit and thread. As it is now, if you insert the rack as far as it can go it is way too far in. Ideally, it would be exactly lined up. Failing that, maybe some kind of click or other feedback to know at least that you are in the neighborhood. It would also be great to have an attaching device that is easier to fasten and unfasten than is the bolt/pin. Tip for mounting the rack onto the hitch: I assumed that it would be awkward to hold, what is it 46 pounds?, while trying to line up the rack probe with the receiver. If you have a garage with exposed collar ties, my solution could work well for you. I looped a cargo strap over a collar tie. Then I hooked both hooks of a bungie onto that loop. The idea is that you hook one of the bike frame holders of the rack onto the bungie, suspending the rack a few inches off the garage floor. This takes most of the weight of the rack so that you can just pull up or down and forward until you line up with the receiver. Tip for mounting bikes. Don't put the little screw into the post that prevents you from completely removing the bike frame holders. Remove both holders. Position the first bike, slide the holder into place, position the second bike, slide the holder into place. I found this makes it much easier, because you avoid parts of the bike hitting the holder as you are trying to get the wheels into place. The trick is that if you are mounting only one bike, don't forget to put the second holder back on - or maybe just stick it inside the car right away.

Have used mine several times in the past 2 years on the back of a ‘21 Honda Pilot and a ‘19 Ram 1500 Classic. I really like that the platform will tilt downward allowing the Pilot rear hatch to open with no interference. The tailgate on the Ram doesnt open fully even with the platform tilted downward, but that is a Ram problem & not a Curt problem. Was well worth the money.

Seems like a good rack for the price, especially when compared to others with the same weight rating. It was very easy to assemble, just a few bolts and that's it. I put two 62lb e-bikes on it (Ride1Up Turris) and it has minimal wobble and movement as expected. The straps that come on the center cradles were too short to go around our bike's frame and battery so I had to purchase a separate set of long straps from Saris for an additional $20. So be aware if you have an e-bike with a fat frame where you plan to use the cradle on, you might have to spend another $20 on a pair of long straps. While I waited for the straps I just used a velcro-strap and it worked fine. So far I am content with this rack overall and hope it lasts many years.. I gave it 4 stars instead of 5 because I had to purchase additional straps to make it work.

I had to put my electric bikes into this rack, backwards, to make them fit. Not ideal, but it works.The receiving 'trays' that are intended to provide support for holding the bikes, by being placed under the bike tires, are forced to be moved to a location that is not directly under the bottom of the bike tires. While it works in this manner, it is not ideal.For the support that attaches to the diagonal bike frame, we had to remove it from the vertical rail of the rack. We reinstalled it, upside down, because that's the only way we could make it fit, or 'grab', the bike frame. Again, we made it work, but it's not ideal. We chose to keep the rack because it was so much less expensive than the Thule rack we considered buying. The bike shop owner didn't agree with us. He observed that we are putting $3000 worth of bikes on the rack and risking that investment. So far, no problems, other than the ill-fitting installation.